Public Protocol
Platform

Element 9.27

Robot arms and grippers

Sheet
9.27
Chapter
9 Manufacturing and repair
State
Drafted
Release
16 November 2026
Editor
Contributed by Praecise as open research
Reviewers
To be named at review
Safety
S3, as the chapter
Licence
CC BY-SA 4.0
Resources
8

The element

Requirement

A robot arm used by the community has a stated task, payload and working envelope; is built or bought from documented designs; is programmed with tools the community can maintain; and is guarded or limited so that it cannot injure a person, according to the recognised robot safety standards.

How to tell
  • The arm's payload, reach and limits are written down from its documentation. Where a design states no payload, as one educational printed arm does not (BCN3D Moveo), the community measures it and records the result (9.5).
  • A risk assessment exists for each task. The US regulator lists the consensus standards for robots: ISO 12100 for machinery risk assessment, ISO 10218-1 and -2 for industrial robots and their integration, ISO/TS 15066 for collaborative robot safety and ISO/TR 20218-1 for end-effectors; it states these are guidance, not its regulations (OSHA Robotics: Standards).
  • In the European Union, machinery placed on the market from 20 January 2027 falls under the Machinery Regulation, which covers AI-powered safety functions and cyber-safety of safety controls (Machinery Regulation (EU) 2023/1230).
  • The design files, software and licence are held locally (9.6).
Options
  • Low-cost open arms for learning and light tasks: a printed arm with six serial servos, used as a leader and follower pair for teleoperation and imitation learning; the repository lists parts for a pair at about USD 230, prices varying by location and undated (Standard Open SO-100 and SO-101 Arms). A fully printed educational arm with manuals in English and Spanish (BCN3D Moveo).
  • Arms driven by machine control software: LinuxCNC drives robot arms and hexapods as well as machine tools (LinuxCNC).
  • Industrial and collaborative arms bought from a maker: fit repeated heavy tasks; they come with the maker's safety documentation and are integrated to ISO 10218-2 (OSHA Robotics: Standards).
  • Grippers and end-effectors: simple jaws on low-cost arms (Standard Open SO-100 and SO-101 Arms); research fingertips with touch sensing are released as open designs (Meta FAIR robotics release: Digit 360, Sparsh and Digit Plexus). ISO/TR 20218-1 covers end-effector safety (OSHA Robotics: Standards).
  • Motion planning and grasping software for arms (MoveIt) and learning-based control (LeRobot).
Settled, open, contested

Settled: robot safety rests on risk assessment and the ISO 10218 family, with ISO/TS 15066 for people working beside robots (OSHA Robotics: Standards). Open: repeatability and payload of open, low-cost arms are rarely stated by their projects; measure them. Contested: whether low-cost hobby arms belong in work beside people. Their low force limits harm; they also lack the certified safety functions of industrial arms. Treat them as tools for supervised use.

The four stages

Resources at each stage

1 Learn

Understand

2 Design

Size and choose

3 Build

Build or obtain

4 Deploy

Install, run and measure

What changes between 30 adults and 300 people

At 30 adults, one or two low-cost arms serve teaching and light, repetitive bench work, run only with a person present. At 300 people, an arm may take on real production tasks, such as sorting, packing or machine tending; then it needs a formal risk assessment, a guarded cell or a collaborative arm bought with its documentation, and a trained keeper.

Reference designs

  • Reference design

    BCN3D Moveo

    Open, fully 3D-printed robot arm designed by BCN3D Technologies with the education department of the Generalitat de Catalunya for teaching mechanical design, automation and industrial programming. The repository holds CAD and STL files, a bill of materials and assembly, tuning and firmware manuals in English and Spanish.

    External resource. Not made or verified by Public ProtocolMaturity: ReplicatedSafety S2Listed 16 November 2026
  • Reference design

    Meta FAIR robotics release: Digit 360, Sparsh and Digit Plexus

    October 2024 release of an artificial fingertip (Digit 360) that Meta states has over 8 million taxels, more than 18 sensing features and detects forces of 1 millinewton; a self-supervised touch model (Sparsh) pre-trained on over 460,000 tactile images; and a platform to connect touch sensors across a robot hand. Code and designs released; manufacture by partner firms announced.

    External resource. Not made or verified by Public ProtocolMaturity: PrototypeSafety S0Open, with paid products or servicesListed 16 November 2026
  • Reference design

    OSHA Robotics: Standards

    US Occupational Safety and Health Administration list of the consensus standards that apply to robots, stated not to be OSHA regulations: ISO 12100, ISO 10218-1 and -2 (adopted in the US as ANSI/RIA R15.06-2012 and in Canada as CSA Z434), ISO/TS 15066 on collaborative robot safety, ISO/TR 20218 on end-effectors and load stations, UL 1740 and the RIA technical reports.

    External resource. Not made or verified by Public ProtocolMaturity: EstablishedSafety S3Open or commercial: not stated by the makerListed 16 November 2026
  • Reference design

    Standard Open SO-100 and SO-101 Arms

    Open, largely 3D-printed robot arms designed by RobotStudio with Hugging Face for the LeRobot learning library. Each arm uses six STS3215 serial bus servos; a leader arm moved by hand teaches a follower arm. The repository gives STEP and STL files, a bill of materials and print gauges.

    External resource. Not made or verified by Public ProtocolMaturity: WorkingSafety S2Open, with paid products or servicesListed 16 November 2026

Parts list

Every resource that supports this element. Those marked External carry the label “External resource. Not made or verified by Public Protocol”.

ResourceTypeOriginMaturitySafetyLicence, as stated at its source
BCN3D MoveoReference designExternalReplicatedS2MIT
Machinery Regulation (EU) 2023/1230StandardExternalEstablishedS3Not stated on the page opened
LeRobotLibraryExternalWorkingS2Apache-2.0
LinuxCNCToolExternalEstablishedS2GNU GPLv2
Meta FAIR robotics release: Digit 360, Sparsh and Digit PlexusReference designExternalPrototypeS0Not stated on the page opened
MoveItToolExternalEstablishedS2BSD
OSHA Robotics: StandardsReference designExternalEstablishedS3Not stated on the page opened
Standard Open SO-100 and SO-101 ArmsReference designExternalWorkingS2"Apache-2.0 license", as the repository states

Depends on, and completes

Depends on 9.1, 9.2, 9.3, 9.6.

It is one of 34 elements that complete Manufacturing and repair.

The standing questions

Who is responsible when an arm hurts someone. Who programs it and who may change the program. Who decides which work it takes from people.

Environments

No source found on how arm designs change on islands and coasts, in arctic cold, hot deserts, tropical humid forest, temperate forest, high altitude or flood plains. Read each maker's rating for motors and materials.

Safety level S3. A mistake here can injure or kill. This text states the requirement and names the recognised standards; it is not a procedure. Work to the standard named, under a person qualified for robot integration.

Safety

State and evidence

Drafted

An editor has written the element's text from the resources listed under it, citing them. It is checked when it is reviewed.

Evidence from a real place or system is recorded here, with what did not work. What the states mean

History