Element 9.33
Papermaking
- Sheet
- 9.33
- Chapter
- 9 Manufacturing and repair
- State
- Drafted
- Release
- 16 November 2026
- Editor
- Contributed by Praecise as open research
- Reviewers
- To be named at review
- Safety
- S2, as the chapter
- Licence
- CC BY-SA 4.0
- Resources
- 7
The element
- Requirement
The community makes the paper and card it needs from recovered paper or local plant fibre, with water reused, alkali handled safely, and sheets tested against the use they are made for.
- How to tell
- The sheet is measured. A study of ten handmade Lokta papers from Nepal reported grammage of 50 to 150 g/m2, tensile strength from 30 to 2,900 N/m and opacity of 83 to 98%, with strength higher along the length (Material Properties of Traditional Handmade Paper Samples Fabricated from Cellulosic Fiber of Lokta Bushes). These give a reference for what handmade paper achieves.
- Water is reused. A small recycled-paper method on Appropedia states that water is recycled many times and residual chemicals kept for reuse (Papermaking (Appropedia)).
- Where plant fibre is cooked in sodium hydroxide, exposure stays below its limits: NIOSH gives a ceiling of 2 mg/m3 and calls for an eyewash station and quick drench shower (NIOSH Pocket Guide to Chemical Hazards: Sodium hydroxide).
- Options
- Recovered paper. Soaking, pulping in a hydropulper at a stated 50:1 water-to-paper ratio, forming on moulds and deckles, couching, pressing and drying to about 150 gsm; developed with a village project in Fiji, with solar heat for water and drying (Papermaking (Appropedia)). The page says some steps are unclear and will be developed.
- Bush and bast fibre. Traditional Lokta paper in Nepal (Material Properties of Traditional Handmade Paper Samples Fabricated from Cellulosic Fiber of Lokta Bushes).
- Crop residues. Flax straw left from oil flax in Ethiopia gave a pulp yield of 40.56% by kraft pulping at 10% alkali, 131.74 °C and 120 minutes, and paper of standard strength (Production and characterization of pulp and paper from flax straw). Kraft cooking is a laboratory or mill process, not a hand process.
- Lower-chemical bleaching. Bio-bleaching of a non-wood pulp with a bacterial consortium before a reduced chemical stage, at laboratory scale (Bio-bleaching of ankara pulp with xylanase-producing bacterial consortium for sustainable handmade paper production).
- Mill scale. Industrial techniques are in the European reference document (Best Available Techniques (BAT) Reference Document for the Production of Pulp, Paper and Board), which was not read in this work.
- Settled, open, contested
Settled: handmade paper from bush fibre reaches measured, useful strength (Material Properties of Traditional Handmade Paper Samples Fabricated from Cellulosic Fiber of Lokta Bushes). Open: water and energy use per kilogram of handmade paper; no opened source gives figures. Contested: none found in the sources read. Recovery and sorting of waste paper is covered by the waste pass element "Textiles and paper".
The four stages
- Learn: Papermaking (Appropedia), Material Properties of Traditional Handmade Paper Samples Fabricated from Cellulosic Fiber of Lokta Bushes.
- Design: choose fibre from what is discarded locally (Paper and Paperboard: Material-Specific Data gives one country's figures) and from crop residues (Production and characterization of pulp and paper from flax straw).
- Build: vat, moulds, press and drying racks (Papermaking (Appropedia)).
- Deploy: test sheets (Material Properties of Traditional Handmade Paper Samples Fabricated from Cellulosic Fiber of Lokta Bushes); handle alkali to its card (NIOSH Pocket Guide to Chemical Hazards: Sodium hydroxide).
Resources at each stage
1 Learn
Understand
- Papermaking (Appropedia) Guide, S1
- Material Properties of Traditional Handmade Paper Samples Fabricated from Cellulosic Fiber of Lokta Bushes Paper, S0
- Paper and Paperboard: Material-Specific Data Dataset, S0
- Production and characterization of pulp and paper from flax straw Paper, S2
- Best Available Techniques (BAT) Reference Document for the Production of Pulp, Paper and Board Reference design, S2
- NIOSH Pocket Guide to Chemical Hazards: Sodium hydroxide Reference design, S3
- Bio-bleaching of ankara pulp with xylanase-producing bacterial consortium for sustainable handmade paper production Paper, S1
2 Design
Size and choose
4 Deploy
Install, run and measure
What changes between 30 adults and 300 people
At 30 adults, a vat and moulds making paper from the group's own waste paper is a craft and a teaching activity. At 300 people, a small mill making card and paper for the settlement's needs justifies a hydropulper, a press, water reuse and a named person for alkali handling. No source read gives output per worker or costs.
Reference designs
-
Reference design
Best Available Techniques (BAT) Reference Document for the Production of Pulp, Paper and Board
The European reference document for pulp, paper and board mills, published April 2015, with BAT conclusions published in September 2014 as Commission Implementing Decision 2014/687/EU. Only the landing page was opened in this work.
External resource. Not made or verified by Public ProtocolMaturity: EstablishedSafety S2Listed 16 November 2026 -
Reference design
NIOSH Pocket Guide to Chemical Hazards: Sodium hydroxide
The NIOSH entry for sodium hydroxide (lye): a ceiling exposure limit of 2 mg/m3, an IDLH of 10 mg/m3, eye and skin burns among its effects, and its stated protection measures, including an eyewash station and quick drench shower.
External resource. Not made or verified by Public ProtocolMaturity: EstablishedSafety S3Listed 16 November 2026
Parts list
Every resource that supports this element. Those marked External carry the label “External resource. Not made or verified by Public Protocol”.
| Resource | Type | Origin | Maturity | Safety | Licence, as stated at its source |
|---|---|---|---|---|---|
| Papermaking (Appropedia) | Guide | External | Working | S1 | CC-BY-SA-3.0 |
| Material Properties of Traditional Handmade Paper Samples Fabricated from Cellulosic Fiber of Lokta Bushes | Paper | External | Established | S0 | CC BY-NC-ND |
| Paper and Paperboard: Material-Specific Data | Dataset | External | Established | S0 | Not stated on the page opened |
| Production and characterization of pulp and paper from flax straw | Paper | External | Prototype | S2 | CC BY |
| Best Available Techniques (BAT) Reference Document for the Production of Pulp, Paper and Board | Reference design | External | Established | S2 | Not stated on the page opened |
| NIOSH Pocket Guide to Chemical Hazards: Sodium hydroxide | Reference design | External | Established | S3 | Not stated on the page opened |
| Bio-bleaching of ankara pulp with xylanase-producing bacterial consortium for sustainable handmade paper production | Paper | External | Prototype | S1 | CC BY-NC |
Depends on, and completes
It is one of 34 elements that complete Manufacturing and repair.
The standing questions
Who collects and sorts the waste paper. Who handles the alkali. Who decides whether local paper replaces bought paper.
Environments
The Appropedia method was developed for a village in Fiji and uses solar heat for water and drying (Papermaking (Appropedia)). No source found for arctic cold, hot deserts, tropical humid forest beyond that case, temperate forest, high altitude or flood plains.
Safety
State and evidence
Drafted
An editor has written the element's text from the resources listed under it, citing them. It is checked when it is reviewed.
Evidence from a real place or system is recorded here, with what did not work. What the states mean
History
- Drafted in the release of 16 November 2026.