Element 9.7
Second life and recycling of batteries
- Sheet
- 9.7
- Chapter
- 9 Manufacturing and repair
- State
- Drafted
- Release
- 16 November 2026
- Editor
- Contributed by Praecise as open research
- Reviewers
- To be named at review
- Safety
- S3, as the chapter
- Licence
- CC BY-SA 4.0
- Resources
- 8
The element
- Requirement
A used battery is put to a second use only after its condition and safety have been assessed to a recognised repurposing standard, with its history traced, and every battery leaves the community through a lawful collection and recycling route. Dismantling and regrouping cells is work for qualified people in a suitable facility. This page gives no procedure.
- How to tell
The repurposed battery comes with an assessment record under IEC 63330-1, published in June 2024, which specifies a procedure to evaluate the performance and safety of used product for repurposing and stresses data traceability (IEC 63330-1:2024 Repurposing of secondary batteries - Part 1: General requirements), or under UL 1974, which evaluates each pack individually for condition, safety and energy capacity before stationary use (UL 1974: Creating a Safe Second Life for Electric Vehicle Batteries). The standard for new stationary lithium batteries, IEC 62619, does not cover them: it addresses first-life cells and batteries only (EN IEC 62619:2022 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications). At the system level, IEC 62933-5-2 applies over the whole life cycle of a storage system, including end of service life management (IEC 62933-5-2:2025 Electrical energy storage (EES) systems - Part 5-2: Safety requirements for grid-integrated EES systems - Electrochemical-based systems). In the European Union, end of life falls under Regulation (EU) 2023/1542, which sets collection, recycling efficiency and material recovery targets, a battery passport, extended producer responsibility and rules on second-life reuse (Regulation (EU) 2023/1542 on batteries and waste batteries).
- Options
Certified second-life products. Buy repurposed packs assessed to IEC 63330-1 or UL 1974 (IEC 63330-1:2024 Repurposing of secondary batteries - Part 1: General requirements) (UL 1974: Creating a Safe Second Life for Electric Vehicle Batteries). Fits a group that wants low-cost storage with a paper trail.
Community repurposing. Building storage from salvaged vehicle modules, as discussed on open vehicle-conversion wikis (openinverter). Fits only a group with qualified people and a safe workshop; there is no certification behind the result unless it is assessed to a standard.
Collection and recycling. Return through the producer responsibility scheme where one exists (Regulation (EU) 2023/1542 on batteries and waste batteries). Elsewhere, the e-waste record shows how much is documented as collected and recycled worldwide (The Global E-waste Monitor 2024).
- Settled, open, contested
Settled. Retired vehicle batteries keep roughly 70 to 80% of their capacity (Challenges and Opportunities for Second-life Batteries: A Review of Key Technologies and Economy); UL puts it at about 80% (UL 1974: Creating a Safe Second Life for Electric Vehicle Batteries). They are less reliable than new cells (Challenges and Opportunities for Second-life Batteries: A Review of Key Technologies and Economy).
Open. How second-life batteries age. A 2023 review states that degradation models made specifically for second-life batteries do not yet exist (Challenges and Opportunities for Second-life Batteries: A Review of Key Technologies and Economy).
Contested. Whether second life is worth it against falling new-battery prices and the cost of testing. The review analyses profitable uses (Challenges and Opportunities for Second-life Batteries: A Review of Key Technologies and Economy); the certification standards require pack-by-pack assessment, which costs time (UL 1974: Creating a Safe Second Life for Electric Vehicle Batteries).
The four stages
Learn: Challenges and Opportunities for Second-life Batteries: A Review of Key Technologies and Economy. Design: require an assessment to IEC 63330-1:2024 Repurposing of secondary batteries - Part 1: General requirements or UL 1974: Creating a Safe Second Life for Electric Vehicle Batteries; the system standard is IEC 62933-5-2:2025 Electrical energy storage (EES) systems - Part 5-2: Safety requirements for grid-integrated EES systems - Electrochemical-based systems. Build: qualified assembly; community conversions only with care (openinverter). Deploy: keep the history record; at end of life follow Regulation (EU) 2023/1542 on batteries and waste batteries or the national scheme (The Global E-waste Monitor 2024).
Resources at each stage
1 Learn
Understand
2 Design
Size and choose
- Regulation (EU) 2023/1542 on batteries and waste batteries Standard, S2
- EN IEC 62619:2022 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications Standard, S3
- IEC 62933-5-2:2025 Electrical energy storage (EES) systems - Part 5-2: Safety requirements for grid-integrated EES systems - Electrochemical-based systems Standard, S3
- IEC 63330-1:2024 Repurposing of secondary batteries - Part 1: General requirements Standard, S3
- UL 1974: Creating a Safe Second Life for Electric Vehicle Batteries Standard, S3
3 Build
Build or obtain
- EN IEC 62619:2022 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications Standard, S3
- IEC 62933-5-2:2025 Electrical energy storage (EES) systems - Part 5-2: Safety requirements for grid-integrated EES systems - Electrochemical-based systems Standard, S3
- IEC 63330-1:2024 Repurposing of secondary batteries - Part 1: General requirements Standard, S3
- openinverter Library, S3
- UL 1974: Creating a Safe Second Life for Electric Vehicle Batteries Standard, S3
4 Deploy
Install, run and measure
What changes between 30 adults and 300 people
For 30 adults, one certified second-life unit, or none. For 300 people, a supplier relationship that takes back worn packs, and a written end-of-life route funded from the tariff.
Reference designs
Open for contributions Designs with drawings, specifications and a bill of materials. Add to it
Parts list
Every resource that supports this element. Those marked External carry the label “External resource. Not made or verified by Public Protocol”.
Depends on, and completes
Depends on 5.3.
It is one of 34 elements that complete Manufacturing and repair.
The standing questions
Who carries the risk if a repurposed pack fails. Who holds the battery's history. Who pays for recycling.
Environments
No source found that addresses second-life or recycling differently by setting. Remote islands and arctic sites face the added problem of shipping worn batteries out, for which no source was opened.
Safety
State and evidence
Drafted
An editor has written the element's text from the resources listed under it, citing them. It is checked when it is reviewed.
Evidence from a real place or system is recorded here, with what did not work. What the states mean
History
- Drafted in the release of 16 November 2026.