Public Protocol
Platform

Element 12.7

Designing and building bicycles and cargo bikes

Sheet
12.7
Chapter
12 Mobility and transport
State
Drafted
Release
16 November 2026
Editor
Contributed by Praecise as open research
Reviewers
To be named at review
Safety
S3, as the chapter
Licence
CC BY-SA 4.0
Resources
9

The element

Requirement

A bicycle or cargo bike the community designs or builds is drawn before it is made, uses a frame material and joints suited to its load, and is tested against the standard for its class before anyone rides it on a road.

How to tell
  • The class is known and its standard named. ISO 4210 covers bicycles with a maximum saddle height of 635 mm or more and excludes delivery, recumbent, tandem and BMX bicycles; its part 6 specifies the frame and fork test methods (ISO 4210 Cycles - Safety requirements for bicycles (2023 editions; parts 1 and 6 read)). Cargo bikes fall under EN 17860, whose part 4 covers heavyweight carrier cycles above 300 kg and up to 650 kg gross vehicle weight (EN 17860 Carrier cycles (parts 1 to 6)).
  • The material is chosen with its properties in mind. Stiffness comes from elastic modulus and tube diameter: about 30 million psi for steel, 10 to 11 for aluminium and 15 to 16.5 for titanium, with densities of 490, 168.5 and 280 lb per cubic foot; aluminium and titanium frames use larger tubes to make up stiffness (Frame Materials for the Touring Cyclist).
  • Load limits are written on the bike; the open XYZ Cargo trike, for example, is rated for 150 kg plus rider (XYZ CARGO).
  • A drawing and a parts list exist, made in open CAD (FreeCAD); any stress check uses a stated method, for example an open finite element solver (CalculiX).
Options
  • Steel, the forgiving choice: the source cited notes steel frames can be repaired by brazing or welding almost anywhere (Frame Materials for the Touring Cyclist).
  • Aluminium and titanium, lighter per stiffness but needing larger tubes and specialist joining (Frame Materials for the Touring Cyclist).
  • Carbon fibre: the source cited says carbon frames had not then shown the reliability needed for heavy touring and notes corrosion at metal-to-carbon joints (Frame Materials for the Touring Cyclist).
  • Bamboo with lugs, built with hand tools and no welding on an MDF jig; one kit maker states more than 3,500 bikes built and more than 4,000 people trained (Bamboo Bicycle Club).
  • Bolted spaceframe cargo bikes and trikes from an open manual (XYZ CARGO).
  • Wheels, drivetrains and brakes bought as certified parts and fitted using published repair methods (Park Tool Repair Help).
Settled, open, contested

Settled: frame stiffness depends on modulus and tube diameter, not the brand of alloy (Frame Materials for the Touring Cyclist). Open: published fatigue results for community-built bamboo and wood frames; none were found in this work. The source cited for materials dates from 2010 (Frame Materials for the Touring Cyclist). Contested: carbon fibre for heavy-duty use; the source cited doubts it, and no newer independent source was opened.

What changes between 30 adults and 300 people

At 30 adults, building from a kit or an open design in a shared workshop, with bought wheels and brakes. At 300 people, a frame jig, a trained builder, a record for every frame, and an arrangement with a test house for frames sold or lent beyond members.

Reference designs

  • Reference design

    XYZ CARGO

    Modular bolted-spaceframe cargo bikes and trikes, with a downloadable DIY manual; the trike is rated for 150 kg plus rider. Its stage, as described at the source: deployed.

    External resource. Not made or verified by Public ProtocolMaturity: WorkingSafety S2Open, with paid products or servicesListed 16 November 2026

Parts list

Every resource that supports this element. Those marked External carry the label “External resource. Not made or verified by Public Protocol”.

ResourceTypeOriginMaturitySafetyLicence, as stated at its source
Bamboo Bicycle ClubGuideExternalReplicatedS2Not stated on the page opened (copyright Bamboo Bicycle Club)
Bike Collectives WikiGuideExternalEstablishedS0Not stated on the page opened
CalculiXToolExternalEstablishedS1GNU General Public License, "either version 2 of the License, or (at your option) any later version"
EN 17860 Carrier cycles (parts 1 to 6)StandardExternalEstablishedS2Not stated on the page opened (standard text sold)
FreeCADToolExternalEstablishedS0Described as "open source" at the source; the licence is not named on the page opened
ISO 4210 Cycles - Safety requirements for bicycles (2023 editions; parts 1 and 6 read)StandardExternalEstablishedS2Not stated on the page opened (standard text sold)
Park Tool Repair HelpGuideExternalEstablishedS0Copyright Park Tool Co. (no open licence stated)
Frame Materials for the Touring CyclistGuideExternalEstablishedS1Copyright 2001, 2008 Sheldon Brown, as stated on the page
XYZ CARGOReference designExternalWorkingS2FAQ states CC BY-SA-NC 3.0; the manual links to BY-NC-SA 4.0

Depends on, and completes

Depends on 12.1, 12.6.

It is one of 20 elements that complete Mobility and transport.

The standing questions

Who tests a home-built frame. Who is liable if it fails. Who keeps the jig and the skills.

Environments

Environment profiles for these settings: Remote and off-grid sites. All environments

Safety

State and evidence

Drafted

An editor has written the element's text from the resources listed under it, citing them. It is checked when it is reviewed.

Evidence from a real place or system is recorded here, with what did not work. What the states mean

History