Public Protocol
Platform

Element 7.10

Plastics: sorting and safe local reprocessing

Sheet
7.10
Chapter
7 Waste, sanitation and material cycles
State
Drafted
Release
16 November 2026
Editor
Contributed by Praecise as open research
Reviewers
To be named at review
Safety
S3, as the chapter
Licence
CC BY-SA 4.0
Resources
9

The element

Requirement

Plastic is sorted by polymer, kept clean, and either sent to a recycler or remade locally only from polymers that can be heated without harmful fumes, in a workshop with fume extraction and wash-water filtering. Nothing plastic is burned in the open, and PVC is never heated.

How to tell
  • Every bag of plastic carries its polymer. Precious Plastic's own pages state that types must not be mixed: they melt at different temperatures, some burn before others melt, and mixed melts separate into weak layers Precious Plastic Academy.
  • Only PP and PE (HDPE, LDPE) are worked freely; PS only with limits; PVC never. The project's safety page states that PS may be melted for no more than 8 hours a week with a gas mask and ventilation, and that PVC releases chloride when heated and HCl and dioxins when burned Precious Plastic Academy.
  • Fume control is in place: a fitted gas mask with activated carbon cartridges (a dust mask does not work), changed after about 50 hours, and local exhaust ventilation with a capture hood and a fan rated at 780 to 1,000 cubic metres an hour Precious Plastic Academy.
  • Wash water passes a filter before discharge; the authors of the one plant study found recommend finer filtration for particles below 5 micrometres The potential for a plastic recycling facility to release microplastic pollution and possible filtration remediation effectiveness.
Options

Sell sorted, baled plastic to a recycler. Fits where a buyer exists; no heating on site.

Shred only. The open shredder takes PP, PE and PS up to 4 mm thick at about 10 kg an hour, producing flakes of 0 to 30, 0 to 10 or 0 to 7 mm for the other machines Precious Plastic Academy. Flakes can be sold.

Extrusion, injection and compression. Small open machines for beams, filament and moulded parts Precious Plastic Academy.

Sheetpress. Presses flakes into 1 m by 1 m sheets 4 to 35 mm thick in about 40 to 60 minutes a sheet, at 220 degrees C for HDPE, 230 for PP and 240 for PS; it needs a 15 kW, 400 V, 32 A supply and weighs 450 kg Precious Plastic Academy.

Chemical recycling (not a local option). Pyrolysis runs above 400 degrees C, yields mixed products that need costly separation, and needs halogens removed first from PVC and PTFE End-of-Life Plastics Management: A Review. Mechanical recycling, pyrolysis and hydrocracking methods. The EU's Joint Research Centre concluded that, as of 2025, chemical recycling does not reach cost parity with virgin plastics Economic viability of chemical recycling: Current and future perspectives.

Settled, open, contested

Settled. This is safety level S3 because of toxic fumes, burns, shredder blades and three-phase power; this page gives no operating procedure, and the machine documentation and national occupational rules apply. Melting releases volatile organic compounds; in Chinese recycling workshops, total VOCs were highest for ABS and PS, workers in those workshops faced acute and chronic risks, and a definite cancer risk was found in the PS, PA, ABS and PVC workshops Pollution characteristics and health risk assessment of volatile organic compounds emitted from different plastic solid waste recycling workshops. In small Thai PE and PP plants, extrusion workers had the highest VOC and heat exposure, and heat stress exceeded occupational limits Occupational exposure to hazards and volatile organic compounds in small-scale plastic recycling plants in Thailand by integrating risk and life cycle assessment concepts. Burning releases dioxins, which WHO links to immune, nervous, endocrine and reproductive harm and which persist 7 to 11 years in the body Dioxins (WHO fact sheet).

Open. Microplastics in wash water. At one UK plant, raw wash water held 5.97 million to 112 million particles per cubic metre, and particles below 5 micrometres passed the filter The potential for a plastic recycling facility to release microplastic pollution and possible filtration remediation effectiveness. No measurements were found for small open-source workshops.

Contested. Local remaking or shipping to industrial recyclers; whether chemical recycling will scale Economic viability of chemical recycling: Current and future perspectives.

The four stages

Resources at each stage

What changes between 30 adults and 300 people

Thirty adults produce little plastic of any one polymer; selling sorted plastic or shredding is the realistic path. Three hundred people can run a shredder and one heating machine with a trained operator, a ventilated room and a three-phase supply for a sheetpress Precious Plastic Academy.

Reference designs

  • Reference design

    Precious Plastic

    Machines and methods for recycling plastic at small scale. Its site states 1,100 workspaces in 56 countries in 2024.

    External resource. Not made or verified by Public ProtocolMaturity: ReplicatedSafety S2Listed 16 November 2026

Parts list

Every resource that supports this element. Those marked External carry the label “External resource. Not made or verified by Public Protocol”.

ResourceTypeOriginMaturitySafetyLicence, as stated at its source
Occupational exposure to hazards and volatile organic compounds in small-scale plastic recycling plants in Thailand by integrating risk and life cycle assessment conceptsPaperExternalNot assessedS2Not stated on the page opened
ASTM D7611/D7611M-26 Standard Practice for Coding Plastic Manufactured Articles for Resin IdentificationStandardExternalEstablishedS0"Copyright © 1996 - 2026 ASTM. All Rights Reserved.", as the page states
The potential for a plastic recycling facility to release microplastic pollution and possible filtration remediation effectivenessPaperExternalNot assessedS1"CC BY license" (Creative Commons Attribution 4.0), as the article states
Pollution characteristics and health risk assessment of volatile organic compounds emitted from different plastic solid waste recycling workshopsPaperExternalNot assessedS2"© 2015 Elsevier Ltd. All rights reserved.", as the article states
Economic viability of chemical recycling: Current and future perspectivesPaperExternalNot assessedS0Not stated on the page opened
Precious Plastic AcademyGuideExternalReplicatedS3"Creative Commons Attribution - Sharealike International 4.0" for content, as its site states; site code GPL-3.0
Precious PlasticReference designExternalReplicatedS2"Creative Commons Attribution", as its site states
Dioxins (WHO fact sheet)GuideExternalEstablishedS1Not stated on the page opened
End-of-Life Plastics Management: A Review. Mechanical recycling, pyrolysis and hydrocracking methodsPaperExternalNot assessedS0"© 2024 Johnson Matthey", as the article states

Depends on, and completes

Depends on 7.4, 7.5.

It is one of 11 elements that complete Waste, sanitation and material cycles.

The standing questions

Who pays for extraction and filters. Who runs the machines and carries the exposure. Who decides which polymers are refused.

Environments

  • Islands and coasts: no source found specific to islands. Where power is limited, note that the sheetpress needs a 15 kW, 400 V supply Precious Plastic Academy.
  • Tropical humid forest: activated carbon filters work best below 70% humidity and below 80 degrees C ambient, by the project's own page Precious Plastic Academy.
  • Arctic cold, hot deserts, temperate forest, high altitude, flood plains, other harsh settings: no source found.

Safety

State and evidence

Drafted

An editor has written the element's text from the resources listed under it, citing them. It is checked when it is reviewed.

Evidence from a real place or system is recorded here, with what did not work. What the states mean

History