Public Protocol
Platform

Element 9.12

Soap, handrub and cleaning products

Sheet
9.12
Chapter
9 Manufacturing and repair
State
Drafted
Release
16 November 2026
Editor
Contributed by Praecise as open research
Reviewers
To be named at review
Safety
S3, as the chapter
Licence
CC BY-SA 4.0
Resources
4

The element

Requirement

If a community makes its own soap, handrub or cleaning products, it uses a recognised formulation or method, controls the hazards of its raw materials, and meets the product law that applies wherever the products are given or sold.

How to tell
Options
  • Soap from fat and lye. Soap comes from reacting animal or vegetable fat with lye. The lye can come from wood ash. Appropedia warns that lye is dangerous and that the work reaches 100 degrees C (Soap (Appropedia)). That page cites no external sources, so treat it as an introduction only.
  • Alcohol-based handrub. WHO publishes a guide for local production of its recommended formulations (Guide to local production: WHO-recommended handrub formulations). It fits where soap and water are short.
  • Buying in. Where the hazards or the law outweigh the saving, buying finished products is the safer course.
Settled, open, contested

Settled: lye is corrosive and needs eye and skin protection (NIOSH Pocket Guide to Chemical Hazards: Sodium hydroxide). WHO's handrub formulations are the recognised basis for local production (Guide to local production: WHO-recommended handrub formulations). Open: how soap law treats a community's own internal use differs by country, and no international source was found. Contested: no disagreement was found in the sources read.

What changes between 30 adults and 300 people

At 30 adults, a few trained people making small batches for the group's own use is the usual case. At 300 people, steady demand makes a small production unit worth having. Selling or giving products outside the group brings in product law (Making cosmetic products available to consumers in Great Britain). No source read gives production volumes for either scale.

Reference designs

  • Reference design

    NIOSH Pocket Guide to Chemical Hazards: Sodium hydroxide

    The NIOSH entry for sodium hydroxide (lye): a ceiling exposure limit of 2 mg/m3, an IDLH of 10 mg/m3, eye and skin burns among its effects, and its stated protection measures, including an eyewash station and quick drench shower.

    External resource. Not made or verified by Public ProtocolMaturity: EstablishedSafety S3Listed 16 November 2026

Parts list

Every resource that supports this element. Those marked External carry the label “External resource. Not made or verified by Public Protocol”.

ResourceTypeOriginMaturitySafetyLicence, as stated at its source
Soap (Appropedia)GuideExternalNot assessedS3CC BY-SA 3.0
Making cosmetic products available to consumers in Great BritainGuideExternalEstablishedS2Not stated on the page opened
NIOSH Pocket Guide to Chemical Hazards: Sodium hydroxideReference designExternalEstablishedS3Not stated on the page opened
Guide to local production: WHO-recommended handrub formulationsGuideExternalEstablishedS3Not stated on the page opened

Depends on, and completes

Depends on 9.1, 8.1.

It is one of 34 elements that complete Manufacturing and repair.

The standing questions

Who is trained and named as responsible. Who pays for protective equipment. Who decides whether products leave the group.

Environments

No source found for any setting. Wood-ash lye is described in general terms only (Soap (Appropedia)).

Safety

State and evidence

Drafted

An editor has written the element's text from the resources listed under it, citing them. It is checked when it is reviewed.

Evidence from a real place or system is recorded here, with what did not work. What the states mean

History