Public Protocol
Platform

Element 9.13

Design for manufacture, assembly and repair

Sheet
9.13
Chapter
9 Manufacturing and repair
State
Drafted
Release
16 November 2026
Editor
Contributed by Praecise as open research
Reviewers
To be named at review
Safety
S1, as the chapter
Licence
CC BY-SA 4.0
Resources
8

The element

Requirement

Parts and machines are designed so that the community's own tools can make them, few and standard parts go into them, they go together without special skill, and they can be taken apart, repaired and upgraded with common tools and available spares.

How to tell
Options
Settled, open, contested

Settled: fewer and standard parts reduce cost and failure (Design for Manufacturing (DFM), in Design for Various Manufacturing Methods). Open: the text of EN 45554 is sold; the criteria it lists were not read in this research, and the page opened does not name them (EN 45554: assessment of the ability to repair, reuse and upgrade energy-related products). Contested: integration against modularity. Merging parts cuts cost and assembly time; separate parts can be replaced one at a time. Choose by which parts wear.

The four stages

Resources at each stage

What changes between 30 adults and 300 people

At 30 adults, design for the tools in the room and for hands, not fixtures. At 300 people batches justify jigs, fixtures and a parts store, and design for assembly saves real hours.

Reference designs

  • Reference design

    Standard Open SO-100 and SO-101 Arms

    Open, largely 3D-printed robot arms designed by RobotStudio with Hugging Face for the LeRobot learning library. Each arm uses six STS3215 serial bus servos; a leader arm moved by hand teaches a follower arm. The repository gives STEP and STL files, a bill of materials and print gauges.

    External resource. Not made or verified by Public ProtocolMaturity: WorkingSafety S2Open, with paid products or servicesListed 16 November 2026
  • Reference design

    XYZ CARGO

    Modular bolted-spaceframe cargo bikes and trikes, with a downloadable DIY manual; the trike is rated for 150 kg plus rider. Its stage, as described at the source: deployed.

    External resource. Not made or verified by Public ProtocolMaturity: WorkingSafety S2Open, with paid products or servicesListed 16 November 2026

Parts list

Every resource that supports this element. Those marked External carry the label “External resource. Not made or verified by Public Protocol”.

ResourceTypeOriginMaturitySafetyLicence, as stated at its source
EN 45554: assessment of the ability to repair, reuse and upgrade energy-related productsStandardExternalEstablishedS0Not stated on the page opened
Rules promoting the repair of goods: Directive (EU) 2024/1799StandardExternalEstablishedS1Not stated on the page opened
iFixitLibraryExternalEstablishedS1CC BY-NC-SA 3.0
Design for Manufacturing (DFM), in Design for Various Manufacturing MethodsCourseExternalEstablishedS0"shared under a CC BY 4.0 license"
Open Repair Alliance datasetDatasetExternalWorkingS0CC BY-SA 4.0
Design for Manufacture and AssemblyCourseExternalEstablishedS0"Creative Commons Attribution 4.0 International License, except where otherwise noted"
Standard Open SO-100 and SO-101 ArmsReference designExternalWorkingS2"Apache-2.0 license", as the repository states
XYZ CARGOReference designExternalWorkingS2FAQ states CC BY-SA-NC 3.0; the manual links to BY-NC-SA 4.0

Depends on, and completes

Depends on 9.3, 9.4, 9.6.

It is one of 34 elements that complete Manufacturing and repair.

The standing questions

Who stocks spares and for how long. Who writes the repair guide. Who decides between cheaper to make and easier to mend.

Environments

No source found for any setting.

Safety level S1.

Safety

State and evidence

Drafted

An editor has written the element's text from the resources listed under it, citing them. It is checked when it is reviewed.

Evidence from a real place or system is recorded here, with what did not work. What the states mean

History