Public Protocol
Platform

Element 9.23

Building robots and machines yourself

Sheet
9.23
Chapter
9 Manufacturing and repair
State
Drafted
Release
16 November 2026
Editor
Contributed by Praecise as open research
Reviewers
To be named at review
Safety
S3, as the chapter
Licence
CC BY-SA 4.0
Resources
10

The element

Requirement

A community that builds its own robots and automated machines starts from documented designs, chooses actuators and power to the load, builds in a way that can be repaired, and includes emergency stopping and guarding from the first build, judged by the recognised machinery standards.

How to tell
  • The build starts from a published design with a bill of materials and assembly manual, such as a printed educational arm with manuals in two languages (BCN3D Moveo) or a low-cost arm with a parts list (Standard Open SO-100 and SO-101 Arms).
  • Actuators are chosen by torque and control: the low-cost arm uses serial servos with 16.5 kg cm stall torque at 6 V, or a 12 V version at 30 kg cm (Standard Open SO-100 and SO-101 Arms); brushless and stepper motors are driven with field-oriented control by open libraries on more than 15 microcontroller architectures (SimpleFOC) or open motor controllers (VESC Project).
  • A risk assessment names each hazard and the control, following ISO 12100 as listed by the US regulator (OSHA Robotics: Standards), and the work equipment duties of inspection, maintenance and training are met (Provision and Use of Work Equipment Regulations 1998 (PUWER)).
  • Documentation is kept to 9.6 and a test of the finished machine is recorded (9.5).
Options
  • Servo-based builds: simplest wiring and control; fit arms and small mechanisms (Standard Open SO-100 and SO-101 Arms).
  • Builds driven by 3D-printer-style firmware: the printed educational arm's repository carries Marlin-based firmware controlled from Arduino-based software (BCN3D Moveo).
  • Brushless motors with field-oriented control: higher power and efficiency for wheels, joints and spindles (SimpleFOC, VESC Project).
  • Controllers: microcontroller boards programmed in C++ or Python (Arduino Documentation, MicroPython); a single-board computer running ROS 2 for robots with cameras and lidar (TurtleBot 4). Boards and edge computers are treated in their own topics.
  • Software for learning and control on the finished robot (LeRobot).
Settled, open, contested

Settled: open designs, open motor control and open software let a community build capable robots (Standard Open SO-100 and SO-101 Arms, SimpleFOC, LeRobot). Settled: risk assessment and guarding come before use (OSHA Robotics: Standards, Provision and Use of Work Equipment Regulations 1998 (PUWER)). Open: the long-term reliability of printed structures under load; measure and record (9.5). Contested: build or buy. Building teaches and keeps repair local; bought machines carry certified safety functions. Many groups build to learn and buy for production.

The four stages

Resources at each stage

1 Learn

Understand

2 Design

Size and choose

3 Build

Build or obtain

4 Deploy

Install, run and measure

What changes between 30 adults and 300 people

At 30 adults, robot building is a workshop club: small servo machines, a bench supply, and supervised use. At 300 people, members build machines that do real work, such as carts, conveyors and handling aids; these carry larger motors and batteries, need a written risk assessment, a stop that cuts power, and a keeper.

Reference designs

  • Reference design

    BCN3D Moveo

    Open, fully 3D-printed robot arm designed by BCN3D Technologies with the education department of the Generalitat de Catalunya for teaching mechanical design, automation and industrial programming. The repository holds CAD and STL files, a bill of materials and assembly, tuning and firmware manuals in English and Spanish.

    External resource. Not made or verified by Public ProtocolMaturity: ReplicatedSafety S2Listed 16 November 2026
  • Reference design

    OSHA Robotics: Standards

    US Occupational Safety and Health Administration list of the consensus standards that apply to robots, stated not to be OSHA regulations: ISO 12100, ISO 10218-1 and -2 (adopted in the US as ANSI/RIA R15.06-2012 and in Canada as CSA Z434), ISO/TS 15066 on collaborative robot safety, ISO/TR 20218 on end-effectors and load stations, UL 1740 and the RIA technical reports.

    External resource. Not made or verified by Public ProtocolMaturity: EstablishedSafety S3Open or commercial: not stated by the makerListed 16 November 2026
  • Reference design

    Standard Open SO-100 and SO-101 Arms

    Open, largely 3D-printed robot arms designed by RobotStudio with Hugging Face for the LeRobot learning library. Each arm uses six STS3215 serial bus servos; a leader arm moved by hand teaches a follower arm. The repository gives STEP and STL files, a bill of materials and print gauges.

    External resource. Not made or verified by Public ProtocolMaturity: WorkingSafety S2Open, with paid products or servicesListed 16 November 2026
  • Reference design

    TurtleBot 4

    Open mobile robot platform for learning and research on an iRobot Create 3 base with a 2D lidar, an OAK-D stereo camera and a Raspberry Pi 4 running ROS 2, in standard and Lite versions; the user manual covers Galactic, Humble and Jazzy.

    External resource. Not made or verified by Public ProtocolMaturity: EstablishedSafety S0CommercialListed 16 November 2026

Parts list

Every resource that supports this element. Those marked External carry the label “External resource. Not made or verified by Public Protocol”.

ResourceTypeOriginMaturitySafetyLicence, as stated at its source
Arduino DocumentationGuideExternalEstablishedS0Not stated on the page opened
BCN3D MoveoReference designExternalReplicatedS2MIT
Provision and Use of Work Equipment Regulations 1998 (PUWER)StandardExternalEstablishedS2Not stated on the page opened
LeRobotLibraryExternalWorkingS2Apache-2.0
MicroPythonToolExternalEstablishedS0MIT license
OSHA Robotics: StandardsReference designExternalEstablishedS3Not stated on the page opened
SimpleFOCLibraryExternalWorkingS2Not stated on the page opened
Standard Open SO-100 and SO-101 ArmsReference designExternalWorkingS2"Apache-2.0 license", as the repository states
TurtleBot 4Reference designExternalEstablishedS0Not stated on the page opened
VESC ProjectRepositoryExternalEstablishedS2Not stated on the page opened

Depends on, and completes

Depends on 9.1, 9.2, 9.3, 9.5, 9.6.

It is one of 34 elements that complete Manufacturing and repair.

The standing questions

Who checks a member's machine before it runs near others. Who pays for motors, batteries and spares. Who keeps the designs.

Environments

No source found on how robot builds change on islands and coasts, in arctic cold, hot deserts, tropical humid forest, temperate forest, high altitude or flood plains. Battery and electrical hazards are treated by the energy and electronics domains.

Safety level S3. Moving machines, motors and batteries can injure, burn or kill. This text states the requirement and names the recognised standards; it is not a procedure. Work to the standard named, under a person competent in machinery and electrical safety.

Safety

State and evidence

Drafted

An editor has written the element's text from the resources listed under it, citing them. It is checked when it is reviewed.

Evidence from a real place or system is recorded here, with what did not work. What the states mean

History