Element 11.18
Reclaimed and recycled structural materials
- Sheet
- 11.18
- Chapter
- 11 Materials and supply
- State
- Drafted
- Release
- 16 November 2026
- Editor
- Contributed by Praecise as open research
- Reviewers
- To be named at review
- Safety
- S3, as the chapter
- Licence
- CC BY-SA 4.0
- Resources
- 7
The element
- Requirement
Reclaimed structural members are used only after their origin, condition and properties have been assessed by a competent person under the guidance that exists for the material, and the engineer accepts them for the new use.
- How to tell
- Reclaimed steel members are assessed under CEN/TS 1090-201, published in 2024. It gives provisions for reusability assessment and for declaring strength, elongation, dimensional tolerances and weldability of reclaimed hot-rolled profiles and hollow sections, for structures in execution classes EXC1 to EXC3 under EN 1090-2 (CEN/TS 1090-201:2024 Execution of steel structures and aluminium structures - Reuse of structural steel, EN 1090-2:2018+A1:2024 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures). Thin-gauge products and fasteners are outside it, and its guidance on welds and connections is informative only (CEN/TS 1090-201:2024 Execution of steel structures and aluminium structures - Reuse of structural steel).
- Reclaimed timber is regraded before structural use; grading standards such as EN 14081-1 set the characteristics to be limited (EN 14081-1:2016+A1:2019 Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements). The cross laminated timber product standard excludes panels made from re-used timber (EN 16351:2021 Timber structures - Cross laminated timber - Requirements), so such products need another route.
- Treated wood is identified before it is cut, burned or reused. The United States agency advises never burning preservative-treated wood in a residential setting and not reusing it as mulch (Chromated Arsenicals (CCA)).
- The record shows where each reclaimed member came from and where it went.
- Options
Reclaimed steel sections. The best documented route, under the 2024 technical specification (CEN/TS 1090-201:2024 Execution of steel structures and aluminium structures - Reuse of structural steel). Reclaimed timber. Beams and boards, regraded (EN 14081-1:2016+A1:2019 Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements). Reclaimed masonry units. Bricks and stone; this work found no open standard for their structural reassessment. Buying from dealers. Directories of reclaimed material dealers exist in north-west Europe (Opalis). Downcycling. Crushed masonry and concrete as fill where structural reuse is not possible.
- Settled, open, contested
Settled: reclaimed steel now has a European technical specification (CEN/TS 1090-201:2024 Execution of steel structures and aluminium structures - Reuse of structural steel). Open: the specification is a technical specification, not yet a full European standard, and its guidance on welds and connections is informative only (CEN/TS 1090-201:2024 Execution of steel structures and aluminium structures - Reuse of structural steel). No equivalent was found for timber or masonry. Contested: reuse against certainty. Reuse saves material and carbon; assessment costs money and leaves residual uncertainty about history and hidden hazards. Both sides agree on identification first.
The four stages
- Learn: what the specification covers and excludes (CEN/TS 1090-201:2024 Execution of steel structures and aluminium structures - Reuse of structural steel); dealers and material sheets (Opalis).
- Design: the engineer designs with declared properties; carbon saved is compared (ICE Database (Inventory of Carbon and Energy)).
- Build: assessment, regrading and fabrication under the execution standard (EN 1090-2:2018+A1:2024 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures, EN 14081-1:2016+A1:2019 Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements); identification of treated wood (Chromated Arsenicals (CCA)).
- Deploy: record reclaimed members in the building record for the next reuse.
Resources at each stage
2 Design
Size and choose
3 Build
Build or obtain
- CEN/TS 1090-201:2024 Execution of steel structures and aluminium structures - Reuse of structural steel Standard, S3
- EN 1090-2:2018+A1:2024 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures Standard, S3
- EN 14081-1:2016+A1:2019 Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements Standard, S3
- EN 16351:2021 Timber structures - Cross laminated timber - Requirements Standard, S3
- Opalis Library, S0
What changes between 30 adults and 300 people
At 30 adults, reuse is case by case: a few beams for a shed or workshop, assessed with the engineer. At 300 people, a reclaimed materials yard with a keeper, a standing link with local demolition, and a batch approach to assessment become worthwhile; the steel specification groups and declares properties of reclaimed components (CEN/TS 1090-201:2024 Execution of steel structures and aluminium structures - Reuse of structural steel).
Reference designs
Open for contributions Designs with drawings, specifications and a bill of materials. Add to it
Parts list
Every resource that supports this element. Those marked External carry the label “External resource. Not made or verified by Public Protocol”.
Depends on, and completes
It is one of 19 elements that complete Materials and supply.
The standing questions
Who takes responsibility for a reused beam. Who pays for testing. Who decides what is too uncertain to use.
Environments
No source found in this work that ties reuse of structural members to a particular climate. Corrosion and decay of the original service environment are part of the assessment; see the steel and timber elements.
Safety
State and evidence
Drafted
An editor has written the element's text from the resources listed under it, citing them. It is checked when it is reviewed.
Evidence from a real place or system is recorded here, with what did not work. What the states mean
History
- Drafted in the release of 16 November 2026.