Public Protocol
Platform

Element 11.19

Fibres, yarn, cloth and cordage

Sheet
11.19
Chapter
11 Materials and supply
State
Drafted
Release
16 November 2026
Editor
Contributed by Praecise as open research
Reviewers
To be named at review
Safety
S2, as the chapter
Licence
CC BY-SA 4.0
Resources
9

The element

Requirement

The community knows which fibres its land, crops and waste can supply, prepares them to a consistent quality, and turns them into yarn, cloth and cordage on machines it can keep running. Dust is controlled where fibre is opened, spun and woven, and any rope or cord that carries a load is tested before use.

How to tell
Options

No open source was opened in this work for hand spinning, open looms, felting, silk, wool scouring, nettle fibre or garment making.

Settled, open, contested

Settled: cotton dust has legal limits and requires medical surveillance where the standard applies (29 CFR 1910.1043, Cotton dust (OSHA)). Open: how to make retting consistent; the review treats this as a research question (Microbial communities and their role in enhancing hemp fiber quality through field retting). Open: no opened source sets a safe working load for home-made natural-fibre rope. Contested: none found in the sources read.

The four stages

Resources at each stage

What changes between 30 adults and 300 people

At 30 adults, fibre work is hand work and repair, with a knitting machine or two and rope bought for any load that matters. At 300 people, a fibre room with dust control, a keeper for each machine and a test rig for cord becomes worth its cost. No source read gives volumes, staffing or costs.

Reference designs

  • Reference design

    Circular Knitic, an open hardware knitting machine

    An open hardware circular knitting machine by Varvara Guljajeva and Mar Canet, built from 3D-printed parts and laser-cut acrylic, with files, an Instructables manual and a Zenodo record (2014). Its README records five machines knitting for eight months in an exhibition and one-day build workshops; Open Source Ecology modelled some parts in OpenSCAD.

    External resource. Not made or verified by Public ProtocolMaturity: WorkingSafety S1Listed 16 November 2026
  • Reference design

    Best Available Techniques (BAT) Reference Document for the Textiles Industry

    The European reference document on textile pre-treatment, dyeing, printing and finishing, published January 2023, with BAT conclusions published in December 2022 as Commission Implementing Decision (EU) 2022/2508. Only the landing page was opened in this work.

    External resource. Not made or verified by Public ProtocolMaturity: EstablishedSafety S2Listed 16 November 2026

Parts list

Every resource that supports this element. Those marked External carry the label “External resource. Not made or verified by Public Protocol”.

ResourceTypeOriginMaturitySafetyLicence, as stated at its source
AYAB (All Yarns Are Beautiful)RepositoryExternalWorkingS1GPL-3.0 (software and firmware); CC-BY-SA-4.0 (hardware)
Microbial communities and their role in enhancing hemp fiber quality through field rettingPaperExternalEstablishedS0CC BY
Circular Knitic, an open hardware knitting machineReference designExternalWorkingS1MIT
CirculoseCase studyExternalWorkingS1Not stated on the page opened
Textiles: Material-Specific DataDatasetExternalEstablishedS0Not stated on the page opened
Investigation of chemical, physical and morpho-mechanical properties of banana-plantain stalk fibers for ropes and woven fabrics used in composite and limited-lifespan geotextilePaperExternalPrototypeS1CC BY-NC
Infinited Fiber Company (Infinna)Case studyExternalPrototypeS1Not stated on the page opened
Best Available Techniques (BAT) Reference Document for the Textiles IndustryReference designExternalEstablishedS2Not stated on the page opened
29 CFR 1910.1043, Cotton dust (OSHA)StandardExternalEstablishedS2Not stated on the page opened

Depends on, and completes

Depends on 11.1, 9.1, 9.2, 9.5.

It is one of 19 elements that complete Materials and supply.

The standing questions

Who grows or collects the fibre, and on whose land. Who does the slow work of spinning and weaving. Who decides whether a home-made rope is trusted with a load.

Environments

Retting depends on biotic and abiotic conditions (Microbial communities and their role in enhancing hemp fiber quality through field retting), so climate will matter; no source found gives figures for any named setting. No source found for islands and coasts, arctic cold, hot deserts, tropical humid forest, temperate forest, high altitude or flood plains.

Safety

State and evidence

Drafted

An editor has written the element's text from the resources listed under it, citing them. It is checked when it is reviewed.

Evidence from a real place or system is recorded here, with what did not work. What the states mean

History