Public Protocol
Platform

Guide

Getting started with your Raspberry Pi

External resource. Not made or verified by Public Protocol.

The maker's setup guide. Its table gives the recommended power supply for each model, 5 V at 5 A (27 W) for Raspberry Pi 5, and notes that voltage is measured at the plug, so cable losses count. It recommends at least 32 GB of card for the desktop system and 8 GB for the Lite system.

Go to the source

https://www.raspberrypi.com/documentation/computers/getting-started.html

Maintainer
Raspberry Pi Ltd
Licence, as stated at its source
Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0); some content from the eLinux wiki under CC BY-SA 3.0 Unported
Open or commercial
Commercial
Maturity
EstablishedOur reading, 16 November 2026
Safety
S1electrical
Review
Listed 16 November 2026by Public Protocol editors
Checked
16 November 2026
Next check due
16 May 2027
Steward
Public Protocol editors

Where it sits in the blueprint

Stages

Learn, Build

Context

Climate, setting, scale, cost and skill: not stated in this entry. Check the source against your own place and numbers.

Verification

No verification is recorded on Public Platform for this entry. Records are added when someone reads it for accuracy, reviews it with a stated qualification, builds it or measures it.

Record

How it came in

Seed catalogue, 16 November 2026. Listed in the edge computing research of 2026-11-16. The source was opened and described on the date shown.

Licence

Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0); some content from the eLinux wiki under CC BY-SA 3.0 Unported. Read at https://www.raspberrypi.com/documentation/computers/getting-started.html. How licences are recorded