Public Protocol
Platform

Element 9.14

Designing a machine

Sheet
9.14
Chapter
9 Manufacturing and repair
State
Drafted
Release
16 November 2026
Editor
Contributed by Praecise as open research
Reviewers
To be named at review
Safety
S3, as the chapter
Licence
CC BY-SA 4.0
Resources
14

The element

Requirement

Before a machine is built, the community writes down what it must do, for whom, and under what limits; designs it so that its hazards are removed or reduced at the drawing stage; and keeps a technical file that lets another group build, use, maintain and judge it.

How to tell
Options
Settled, open, contested

Settled: safety is designed in at the start, through risk assessment and risk reduction (EN ISO 12100:2010 Safety of machinery: General principles for design, risk assessment and risk reduction). Settled in EU law: from 20 January 2027 the 2023 Regulation replaces the 2006 Directive (Regulation (EU) 2023/1230 on machinery). Open: the Commission guidance on the new Regulation; the platform holds no opened copy of it. The revision of ISO 12100 under way since 2024 (prEN ISO 12100 revision project (DIN)). Contested: how far a self-builder who never sells a machine is bound by product law. The self-build guide says used and self-built machines face the same requirements and advises taking legal advice (Sécurité et réglementation (L'Atelier Paysan)). Read the national rule.

The four stages

Resources at each stage

3 Build

Build or obtain

What changes between 30 adults and 300 people

At 30 adults, design work is usually adapting a published machine to local stock and power, with one person keeping the technical file. At 300 people there is enough repeated demand to justify designing a machine in-house, a design review by someone who did not draw it, and formal conformity work if the machine will be sold or lent outside the community.

Reference designs

  • Reference design

    Global Village Construction Set: programme page (opensourceecology.org)

    Open Source Ecology's programme page for the construction set. It counts 50 industrial machines and states that in 2018 the machines were about one third complete, completion meaning a replicable, open source, social production model for a given machine; the first machine, the brick press, was built in 2007.

    External resource. Not made or verified by Public ProtocolMaturity: PrototypeSafety S3Open, with paid products or servicesListed 16 November 2026
  • Reference design

    Global Village Construction Set

    Open Source Ecology's list of open machines it considers needed to build a small civilisation, grouped as habitat, agriculture, industry, energy, materials and transport; the page lists 51 entries, among them a well-drilling rig, bakery oven, chipper hammermill, induction furnace and bioplastic extruder, and says the list is still subject to change.

    External resource. Not made or verified by Public ProtocolMaturity: PrototypeSafety S2Listed 16 November 2026

Parts list

Every resource that supports this element. Those marked External carry the label “External resource. Not made or verified by Public Protocol”.

ResourceTypeOriginMaturitySafetyLicence, as stated at its source
CERN Open Hardware Licence version 2StandardExternalEstablishedS0The licence itself
Introduction to MechanismsCourseExternalEstablishedS0Not stated on the page opened
Open Hardware Standard: Requirements for technical documentation and community-based assessment (DIN SPEC 3105)StandardExternalEstablishedS0Creative Commons Attribution Share Alike 4.0 International
Engineering Statics: Open and InteractiveCourseExternalEstablishedS0Not stated on the page opened
Regulation (EU) 2023/1230 on machineryStandardExternalEstablishedS3Not stated on the page opened
FreeCADToolExternalEstablishedS0Described as "open source" at the source; the licence is not named on the page opened
prEN ISO 12100 revision project (DIN)StandardExternalPrototypeS3Not stated on the page opened
EN ISO 12100:2010 Safety of machinery: General principles for design, risk assessment and risk reductionStandardExternalEstablishedS3Not stated on the page opened
Sécurité et réglementation (L'Atelier Paysan)GuideExternalEstablishedS3"CC-BY-NC-SA L'Atelier Paysan", in the site footer
L'Atelier PaysanLibraryExternalReplicatedS3"CC-BY-NC-SA L'Atelier Paysan", in the site footer; the plans page states no separate licence
Open Know-HowStandardExternalNot assessedS0CC BY-SA 4.0, named for the related standard
Global Village Construction Set: programme page (opensourceecology.org)Reference designExternalPrototypeS3"Licensed under a Creative Commons Attribution-ShareAlike 4.0 International License", for the site's content
Global Village Construction SetReference designExternalPrototypeS2Content is available under CreativeCommons by-sa4.0 unless otherwise noted
Open Source Hardware Definition and certificationStandardExternalEstablishedS0Certification site: CC BY-SA 4.0

Depends on, and completes

Depends on 9.1, 9.2, 9.5, 9.6.

It is one of 34 elements that complete Manufacturing and repair.

The standing questions

Who signs the risk assessment. Who carries liability if a machine lent to a neighbour injures them. Who decides that a design is ready to build.

Environments

Environment profiles for these settings: Small islands and coasts; Arctic, subarctic and permafrost, including sea ice; Extreme cold; Hot deserts; Extreme heat; Tropical rainforest and humid tropics; High humidity; Temperate and boreal forests; Mountains and high altitude; River deltas and flood plains. All environments

Safety

State and evidence

Drafted

An editor has written the element's text from the resources listed under it, citing them. It is checked when it is reviewed.

Evidence from a real place or system is recorded here, with what did not work. What the states mean

History