Element 9.18
Open CAD, CAM and simulation
- Sheet
- 9.18
- Chapter
- 9 Manufacturing and repair
- State
- Drafted
- Release
- 16 November 2026
- Editor
- Contributed by Praecise as open research
- Reviewers
- To be named at review
- Safety
- S2, as the chapter
- Licence
- CC BY-SA 4.0
- Resources
- 10
The element
- Requirement
The community designs parts and machines in software it may keep, change and share; turns those designs into machine instructions; and checks loads, heat and flow by simulation before it cuts material, while treating simulation as a guide that a physical test must confirm.
- How to tell
- Design files are kept in the source format of an open tool, with neutral exports such as STEP, so another group can open them.
- Toolpaths are generated from the design, not drawn by hand, and are simulated before cutting.
- Any part whose failure could injure has a load case, a simulation or calculation, and a physical test (element 9.5).
- Options
- Interactive parametric CAD: FreeCAD. Version 1.0, released 19 November 2024, added a mitigation of the topological naming problem, a built-in Assembly workbench and a CAM workbench (renamed from Path) with a simulator (FreeCAD version 1.0 released).
- Code-based CAD: OpenSCAD describes solids in a script by constructive solid geometry and exports STL, under GPL version 2 (OpenSCAD). CadQuery is a Python library on the OpenCascade kernel that outputs STEP, AMF and 3MF, under Apache 2.0 (CadQuery). Code-based models are easy to vary and to keep under version control.
- Circuit boards: KiCad (KiCad).
- Structural finite elements: CalculiX, linear and non-linear with static, dynamic and thermal solutions, GPL version 2 or later, version 2.23 (CalculiX). Elmer, multiphysics: structures, fluids, heat and electromagnetics, GPL v2 and LGPL v2.1 (Elmer).
- Fluid flow: OpenFOAM, released every June and December, v2606 in June 2026 (OpenFOAM (openfoam.com)).
- Machine control from the toolpath: LinuxCNC (LinuxCNC).
- Settled, open, contested
Settled: open CAD, CAM and simulation tools are mature and in wide use (FreeCAD version 1.0 released, CalculiX, OpenFOAM (openfoam.com)). Open: how far a small group can trust a simulation without an experienced analyst. A wrong boundary condition gives a confident wrong answer. Contested: one tool or several. One tool keeps skills together; script tools suit families of parts and automation, interactive tools suit one-off design. Both are in practice.
The four stages
- Learn: each tool's own documentation (FreeCAD, OpenSCAD, CadQuery, CalculiX, Elmer, OpenFOAM (openfoam.com)).
- Design: model in FreeCAD or CadQuery; check in CalculiX or Elmer.
- Build: toolpaths in the FreeCAD CAM workbench (FreeCAD version 1.0 released); run on LinuxCNC.
- Deploy: publish source files with an Open Know-How manifest (Open Know-How).
Resources at each stage
2 Design
Size and choose
- CadQuery Tool, S0
- CalculiX Tool, S1
- Elmer Tool, S1
- FreeCAD version 1.0 released Guide, S0
- FreeCAD Tool, S0
- KiCad Tool, S0
- Open Know-How Standard, S0
- OpenFOAM (openfoam.com) Tool, S0
- OpenSCAD Tool, S0
What changes between 30 adults and 300 people
At 30 adults, one CAD tool and one person who knows it are enough; simulation is rarely needed. At 300 people a shared file store, agreed templates and a person able to run and check a finite element model are justified.
Reference designs
Open for contributions Designs with drawings, specifications and a bill of materials. Add to it
Parts list
Every resource that supports this element. Those marked External carry the label “External resource. Not made or verified by Public Protocol”.
| Resource | Type | Origin | Maturity | Safety | Licence, as stated at its source |
|---|---|---|---|---|---|
| CadQuery | Tool | External | Established | S0 | "CadQuery is licensed under the terms of the Apache Public License, version 2.0" |
| CalculiX | Tool | External | Established | S1 | GNU General Public License, "either version 2 of the License, or (at your option) any later version" |
| Elmer | Tool | External | Established | S1 | "License: GPL v2" and "License: LGPL v2.1", as the repository states |
| FreeCAD version 1.0 released | Guide | External | Established | S0 | Not stated on the page opened |
| FreeCAD | Tool | External | Established | S0 | Described as "open source" at the source; the licence is not named on the page opened |
| KiCad | Tool | External | Established | S0 | GNU GPL v3 |
| LinuxCNC | Tool | External | Established | S2 | GNU GPLv2 |
| Open Know-How | Standard | External | Not assessed | S0 | CC BY-SA 4.0, named for the related standard |
| OpenFOAM (openfoam.com) | Tool | External | Established | S0 | Not stated on the page opened |
| OpenSCAD | Tool | External | Established | S0 | "General Public License version 2", as the page states |
Depends on, and completes
It is one of 34 elements that complete Manufacturing and repair.
The standing questions
Who keeps the master files. Who checks a simulation before a part is trusted. Who teaches the tools.
Environments
Not dependent on setting. Offline installation matters where connectivity is poor; the sources opened give no figures for this.
Safety level S2. Software does not injure, but a part trusted on a wrong simulation can. Test before use.
Safety
State and evidence
Drafted
An editor has written the element's text from the resources listed under it, citing them. It is checked when it is reviewed.
Evidence from a real place or system is recorded here, with what did not work. What the states mean
History
- Drafted in the release of 16 November 2026.