Element 9.19
Open machine libraries
- Sheet
- 9.19
- Chapter
- 9 Manufacturing and repair
- State
- Drafted
- Release
- 16 November 2026
- Editor
- Contributed by Praecise as open research
- Reviewers
- To be named at review
- Safety
- S3, as the chapter
- Licence
- CC BY-SA 4.0
- Resources
- 20
The element
- Requirement
Before designing a machine, the community looks for an open design that already does the job, reads how mature it is from the project's own record, and chooses designs whose files, licence and build history let it build, repair and change the machine.
- How to tell
- For each candidate design the community has read: the licence at its source, the files offered (CAD, drawings, bill of materials, firmware), and the project's own statement of status.
- The maturity is judged from evidence, not from the name. The Global Village Construction Set's programme page counts 50 machines and states that in 2018 about one third were complete, completion meaning a replicable open source production model (Global Village Construction Set: programme page (opensourceecology.org)); its wiki list holds 51 entries and says the list is still subject to change (Global Village Construction Set). Its CEB press is at product release status (CEB Press (Open Source Ecology)); its lathe page gives a design with no completed build recorded (Open Source Lathe (Open Source Ecology)).
- The design is certified as open hardware (OSHWA Open Source Hardware Certification) or documented to the open hardware standard (Open Hardware Standard: Requirements for technical documentation and community-based assessment (DIN SPEC 3105)), or the gaps are known.
- Options
State as each project describes itself, on the date read:
- Whole-settlement machine sets: Open Source Ecology (Global Village Construction Set, Open Source Ecology wiki).
- Farm tools: L'Atelier Paysan publishes construction plans and runs self-build training; its cooperative company was placed in liquidation on 21 April 2026 and the work continues through two associations (L'Atelier Paysan).
- Plastic recycling machines: Precious Plastic, whose site states 1,100 workspaces in 56 countries in 2024 (Precious Plastic).
- 3D printers: RepRap (RepRap wiki), Voron Design (VORON Design). Prusa Research releases firmware and printable parts at once, schematics later and full CAD under its own Open Community License, and withholds full board layouts for some products (Open source at Prusa Research).
- CNC mills and routers: Mekanika (Mekanika), with LinuxCNC as controller (LinuxCNC).
- Lathes: Modulathe, a desktop lathe with a 125 mm chuck, MIT licence (Modulathe); the Open Source Ecology lathe design (Open Source Lathe (Open Source Ecology)).
- Laser cutters: Lasersaur; the repository opened shows no licence (Lasersaur).
- Pick-and-place: LumenPnP (LumenPnP).
- Laboratory instruments: OpenFlexure microscope (OpenFlexure Microscope).
- Robot arms: SO-101, Apache-2.0 (Standard Open SO-100 and SO-101 Arms).
- General appropriate technology: Appropedia (Appropedia).
- Settled, open, contested
Settled: mature open machines exist for printing, CNC control, microscopy and plastic recycling (RepRap wiki, LinuxCNC, OpenFlexure Microscope, Precious Plastic). Open: no shared, independent register of how many times each open machine has been built and how it performed. Contested: what counts as open. Some makers publish firmware and parts but keep board layouts or use their own licences (Open source at Prusa Research); the Open Source Hardware Definition sets a fuller test (OSHWA Open Source Hardware Certification). Non-commercial licences, such as the site licence of L'Atelier Paysan (L'Atelier Paysan), limit who may make machines for sale.
The four stages
- Learn: browse Open Source Ecology wiki, L'Atelier Paysan, Appropedia.
- Design: check licence and status; adapt in open CAD (element on open CAD, CAM and simulation).
- Build: follow the project's own documentation; test to 9.5.
- Deploy: record the build and feed corrections back; certify or document to OSHWA Open Source Hardware Certification and Open Hardware Standard: Requirements for technical documentation and community-based assessment (DIN SPEC 3105).
Resources at each stage
1 Learn
Understand
- Appropedia Library, S1
- L'Atelier Paysan Library, S3
- Global Village Construction Set: programme page (opensourceecology.org) Reference design, S3
- Global Village Construction Set Reference design, S2
- Open Source Ecology wiki Library, S2
- Precious Plastic Reference design, S2
- RepRap wiki Library, S1
- Standard Open SO-100 and SO-101 Arms Reference design, S2
2 Design
Size and choose
- Open Hardware Standard: Requirements for technical documentation and community-based assessment (DIN SPEC 3105) Standard, S0
- L'Atelier Paysan Library, S3
- Modulathe Reference design, S3
- OpenFlexure Microscope Reference design, S0
- CEB Press (Open Source Ecology) Reference design, S3
- Global Village Construction Set Reference design, S2
- Open Source Lathe (Open Source Ecology) Reference design, S3
3 Build
Build or obtain
- Appropedia Library, S1
- Lasersaur Repository, S3
- L'Atelier Paysan Library, S3
- LinuxCNC Tool, S2
- LumenPnP Reference design, S2
- Mekanika Reference design, S2
- Modulathe Reference design, S3
- OpenFlexure Microscope Reference design, S0
- CEB Press (Open Source Ecology) Reference design, S3
- Open Source Ecology wiki Library, S2
- Precious Plastic Reference design, S2
- Open source at Prusa Research Reference design, S2
- RepRap wiki Library, S1
- Standard Open SO-100 and SO-101 Arms Reference design, S2
- VORON Design Reference design, S2
4 Deploy
Install, run and measure
- Open Hardware Standard: Requirements for technical documentation and community-based assessment (DIN SPEC 3105) Standard, S0
- LinuxCNC Tool, S2
- OSHWA Open Source Hardware Certification Framework, S0
- Standard Open SO-100 and SO-101 Arms Reference design, S2
What changes between 30 adults and 300 people
At 30 adults, pick one or two mature designs that meet the most pressing need and build them well. At 300 people, a small library of built and tested machines becomes possible, with a keeper for each and a record of local changes published back.
Reference designs
-
Reference design
Open source pick-and-place machine for assembling components onto circuit boards, with feeders designed for it. Its stage, as described at the source: deployed.
External resource. Not made or verified by Public ProtocolMaturity: WorkingSafety S2Open, with paid products or servicesListed 16 November 2026 -
Reference design
Open hardware CNC milling machines and a screen printing press for makers and local manufacturers; plans on request.
External resource. Not made or verified by Public ProtocolMaturity: Not assessedSafety S2Open, with paid products or servicesListed 16 November 2026 -
Reference design
Modular open source desktop lathe for metal, wood and plastic. The repository states a 125 mm chuck and an MT5 spindle with a 38 mm through-hole; version 1 is mostly printed, version 2 mostly concrete cast in printed moulds. It warns that lathes are dangerous.
External resource. Not made or verified by Public ProtocolMaturity: PrototypeSafety S3Listed 16 November 2026 -
Reference design
Open design for a 3D-printed, motorised laboratory microscope; its site states sub-100 nm positioning and use in over 60 countries. Its stage, as described at the source: deployed.
External resource. Not made or verified by Public ProtocolMaturity: WorkingSafety S0Listed 16 November 2026 -
Reference design
CEB Press (Open Source Ecology)
Open hydraulic press for compressed earth bricks. Its wiki page states product release status, version 17.08 as the current model, six full-sized bricks per minute at 12.5 gallons per minute of hydraulic flow, and no power unit supplied; it runs from a separate hydraulic power source.
External resource. Not made or verified by Public ProtocolMaturity: WorkingSafety S3Open, with paid products or servicesListed 16 November 2026 -
Reference design
Global Village Construction Set: programme page (opensourceecology.org)
Open Source Ecology's programme page for the construction set. It counts 50 industrial machines and states that in 2018 the machines were about one third complete, completion meaning a replicable, open source, social production model for a given machine; the first machine, the brick press, was built in 2007.
External resource. Not made or verified by Public ProtocolMaturity: PrototypeSafety S3Open, with paid products or servicesListed 16 November 2026 -
Reference design
Global Village Construction Set
Open Source Ecology's list of open machines it considers needed to build a small civilisation, grouped as habitat, agriculture, industry, energy, materials and transport; the page lists 51 entries, among them a well-drilling rig, bakery oven, chipper hammermill, induction furnace and bioplastic extruder, and says the list is still subject to change.
External resource. Not made or verified by Public ProtocolMaturity: PrototypeSafety S2Listed 16 November 2026 -
Reference design
Open Source Lathe (Open Source Ecology)
Design page for a concrete-bed lathe driven by tractor hydraulics, following the Multimachine approach. The page gives two accuracy figures that disagree (2/1000 and 1/1000 inch) and no record of a completed build.
External resource. Not made or verified by Public ProtocolMaturity: ConceptSafety S3Listed 16 November 2026 -
Reference design
Machines and methods for recycling plastic at small scale. Its site states 1,100 workspaces in 56 countries in 2024.
External resource. Not made or verified by Public ProtocolMaturity: ReplicatedSafety S2Listed 16 November 2026 -
Reference design
A printer maker's statement of what it publishes for each model: firmware and printable parts at once, schematics later, full CAD under its own Open Community License, and not full board layouts for some products. The bootloader is locked and unsigned firmware needs a physical modification.
External resource. Not made or verified by Public ProtocolMaturity: EstablishedSafety S2CommercialListed 16 November 2026 -
Reference design
Standard Open SO-100 and SO-101 Arms
Open, largely 3D-printed robot arms designed by RobotStudio with Hugging Face for the LeRobot learning library. Each arm uses six STS3215 serial bus servos; a leader arm moved by hand teaches a follower arm. The repository gives STEP and STL files, a bill of materials and print gauges.
External resource. Not made or verified by Public ProtocolMaturity: WorkingSafety S2Open, with paid products or servicesListed 16 November 2026 -
Reference design
Community project publishing 3D printers designed to be assembled at home, with toolheads and a sourcing guide.
External resource. Not made or verified by Public ProtocolMaturity: EstablishedSafety S2Listed 16 November 2026
Parts list
Every resource that supports this element. Those marked External carry the label “External resource. Not made or verified by Public Protocol”.
| Resource | Type | Origin | Maturity | Safety | Licence, as stated at its source |
|---|---|---|---|---|---|
| Appropedia | Library | External | Established | S1 | CC BY-SA 4.0 per its copyright page (its home page footer says 3.0); hardware defaults to CERN-OHL-S |
| Open Hardware Standard: Requirements for technical documentation and community-based assessment (DIN SPEC 3105) | Standard | External | Established | S0 | Creative Commons Attribution Share Alike 4.0 International |
| Lasersaur | Repository | External | Not assessed | S3 | Not stated on the page opened |
| L'Atelier Paysan | Library | External | Replicated | S3 | "CC-BY-NC-SA L'Atelier Paysan", in the site footer; the plans page states no separate licence |
| LinuxCNC | Tool | External | Established | S2 | GNU GPLv2 |
| LumenPnP | Reference design | External | Working | S2 | Not stated on the page opened |
| Mekanika | Reference design | External | Not assessed | S2 | Not stated on the page opened |
| Modulathe | Reference design | External | Prototype | S3 | "MIT license", as the repository states |
| OpenFlexure Microscope | Reference design | External | Working | S0 | Licensed under CC BY-SA 4.0 (website content) |
| CEB Press (Open Source Ecology) | Reference design | External | Working | S3 | "Open source hardware, controller, and software" under CC-BY-SA 4.0 and GPLv3, as the page states |
| Global Village Construction Set: programme page (opensourceecology.org) | Reference design | External | Prototype | S3 | "Licensed under a Creative Commons Attribution-ShareAlike 4.0 International License", for the site's content |
| Global Village Construction Set | Reference design | External | Prototype | S2 | Content is available under CreativeCommons by-sa4.0 unless otherwise noted |
| Open Source Lathe (Open Source Ecology) | Reference design | External | Concept | S3 | "Content is available under CreativeCommons by-sa4.0" unless otherwise noted |
| Open Source Ecology wiki | Library | External | Working | S2 | CC BY-SA 4.0 |
| OSHWA Open Source Hardware Certification | Framework | External | Established | S0 | Creative Commons Attribution-ShareAlike 4.0 International (site content) |
| Precious Plastic | Reference design | External | Replicated | S2 | "Creative Commons Attribution", as its site states |
| Open source at Prusa Research | Reference design | External | Established | S2 | "Open Community License (OCL)" for full CAD files; firmware described as "completely open-source" without a licence named on the page |
| RepRap wiki | Library | External | Established | S1 | GNU Free Documentation License |
| Standard Open SO-100 and SO-101 Arms | Reference design | External | Working | S2 | "Apache-2.0 license", as the repository states |
| VORON Design | Reference design | External | Established | S2 | Not stated on the page opened |
Depends on, and completes
It is one of 34 elements that complete Manufacturing and repair.
The standing questions
Who checks that a downloaded design is safe before it is built. Who gives back improvements. Who decides between an open design and a cheaper closed machine.
Environments
Open Source Ecology lists a CEB microhouse build in Belize in 2020 (CEB Press (Open Source Ecology)). No source found on how the press performed there.
no source found.
no source found.
no source found.
no source found.
no source found.
no source found.
Other harsh settings
no source found.
Safety level S3. Building a machine from published plans does not transfer the publisher's responsibility; the builder carries it.
Environment profiles for these settings: Tropical rainforest and humid tropics; High humidity; Small islands and coasts; Arctic, subarctic and permafrost, including sea ice; Extreme cold; Hot deserts; Extreme heat; Temperate and boreal forests; Mountains and high altitude; River deltas and flood plains. All environments
Safety
State and evidence
Drafted
An editor has written the element's text from the resources listed under it, citing them. It is checked when it is reviewed.
Evidence from a real place or system is recorded here, with what did not work. What the states mean
History
- Drafted in the release of 16 November 2026.