Public Protocol
Platform

Guide

Protection against earth faults with Residual Current Devices (Technical guide, 2015)

External resource. Not made or verified by Public Protocol.

A maker's technical guide to residual current devices: why 30 mA is the preferred sensitivity for additional protection, how RCDs are used in TT, TN and IT earthing systems, the product standards (IEC 61008, IEC 61009, IEC 62423) and the device types AC, A, F and B by the residual current waveform they detect. The guide states that IEC 60364-4-41 requires 30 mA additional protection for socket circuits up to 20 A and outdoor mobile equipment up to 32 A, and that RCDs are compulsory for earth fault protection in TT systems.

Go to the source

https://library.e.abb.com/public/9f0e99de3bc740288bc41ab95667f72f/RCD%20Technical%20Guide%20EN.pdf

Maintainer
ABB
Licence, as stated at its source
Not stated on the page opened
Open or commercial
Commercial
Maturity
EstablishedOur reading, 16 November 2026
Safety
S3electrical
Review
Listed 16 November 2026by Public Protocol editors
Checked
16 November 2026
Next check due
16 May 2027
Steward
Public Protocol editors

Where it sits in the blueprint

Stages

Learn, Design

Context

Climate, setting, scale, cost and skill: not stated in this entry. Check the source against your own place and numbers.

Verification

No verification is recorded on Public Platform for this entry. Records are added when someone reads it for accuracy, reviews it with a stated qualification, builds it or measures it.

Record

How it came in

Seed catalogue, 16 November 2026. Listed in the seed research on electricity, batteries and mechanics. The source was opened and described on the date shown.

Licence

Not stated on the page opened. Read at https://library.e.abb.com/public/9f0e99de3bc740288bc41ab95667f72f/RCD%20Technical%20Guide%20EN.pdf. How licences are recorded