Public Protocol
Platform

Element 5.20

Micro and pico hydro

Sheet
5.20
Chapter
5 Energy
State
Drafted
Release
16 November 2026
Editor
Contributed by Praecise as open research
Reviewers
To be named at review
Safety
S3, as the chapter
Licence
CC BY-SA 4.0
Resources
7

The element

Requirement

Where a stream has year-round flow and enough fall, the community generates from it with a run-of-river scheme whose intake, channel, penstock and powerhouse are designed for the site's driest month and largest flood, and whose output is held stable by load control.

How to tell

Flow has been measured through at least the dry season and the fall surveyed. The scheme's size is stated in the recognised classes: pico from a few hundred watts to 5 kW, micro 5 to 100 kW, mini 100 to 500 kW (Micro Hydro Power (MHP) Plants). Water returns to the river below the powerhouse. Voltage and frequency stay within limits as load changes, because an electronic load controller or flow control matches output to demand; a mismatch can damage equipment (Micro Hydro Power (MHP) Plants).

Options

Pico hydro. A few hundred watts to 5 kW, for a household or a small cluster (Micro Hydro Power (MHP) Plants).

Micro hydro. 5 to 100 kW, usually for small communities or rural industry in remote areas (Micro Hydro Power (MHP) Plants).

Mini hydro. 100 to 500 kW, stand-alone or feeding a grid (Micro Hydro Power (MHP) Plants).

The parts of a scheme. Weir, intake, channel along the contour, spillways against excess flow, forebay, penstock, powerhouse with turbine and generator, tailrace, local grid and load controller (Micro Hydro Power (MHP) Plants).

Low-head turbines. For falls below 10 metres with large flows, in rivers, streams and irrigation canals: crossflow, propeller and Kaplan types (TI-UP Enquiry: Micro-Hydropower - Low Head Turbines). A closed-volute design developed by Nottingham Trent University and Practical Action Peru reaches efficiencies of up to 70% and can be made locally from inexpensive materials (TI-UP Enquiry: Micro-Hydropower - Low Head Turbines).

Cost. Figures in the open literature are old. Energypedia cites GIZ for USD 1,000 to more than 10,000 per kW in 2010 and Practical Action for about 1,200 to 4,000 pounds per kW, converted at 2013 rates (Micro Hydro Power (MHP) Plants). A 2009 briefing cites about 2,500 to 3,000 US dollars per kW for micro hydro, falling to about 1,000 where local resources and expertise are used, and a plant lifetime of up to 50 years (TI-UP Enquiry: Micro-Hydropower - Low Head Turbines). Treat them as a range to question, not a price.

Settled, open, contested

Settled. Run-of-river schemes need no large dam and have relatively low ecological impact when water returns to the river (Micro Hydro Power (MHP) Plants). Operation and maintenance costs are relatively low (Micro Hydro Power (MHP) Plants). Penstocks hold water under pressure, channels and weirs face floods, and powerhouses contain rotating machines and generators: S3, designed and signed off by qualified people.

Open. Current installed costs: no recent open cost dataset was opened in this work.

Contested. Community ownership against an investor-operator: local control against professional maintenance.

The four stages

Learn: (Micro Hydro Power (MHP) Plants) (energypedia). Design: measure flow and fall; check seasonal rainfall history (Open-Meteo); size the scheme against demand and other sources (MicroGridsPy). Build: civil works and penstock designed by a qualified engineer; electrical work to the IEC 62257 series off grid (IEC TS 62257-100:2022 Renewable energy off-grid systems - Part 100: Overview of the IEC 62257 series). This page gives no construction procedure. Deploy: log output and flow (OpenEnergyMonitor); fund operation and maintenance from a local business model (Micro Hydro Power (MHP) Plants).

Resources at each stage

What changes between 30 adults and 300 people

For 30 adults, a pico or small micro scheme can supply a shared building and charging, maintained by members. For 300 people, a micro or mini scheme with a local grid needs an operator, metering and tariff collection. Energypedia describes one model in which a private investor handles technical operation and the community handles payment collection and local contributions (Micro Hydro Power (MHP) Plants).

Reference designs

Open for contributions Designs with drawings, specifications and a bill of materials. Add to it

Parts list

Every resource that supports this element. Those marked External carry the label “External resource. Not made or verified by Public Protocol”.

ResourceTypeOriginMaturitySafetyLicence, as stated at its source
Micro Hydro Power (MHP) PlantsGuideExternalEstablishedS3Creative Commons Attribution-ShareAlike 4.0 Unported License
energypediaLibraryExternalEstablishedS0CC BY-SA 4.0
IEC TS 62257-100:2022 Renewable energy off-grid systems - Part 100: Overview of the IEC 62257 seriesStandardExternalEstablishedS2Not stated on the page opened
MicroGridsPyToolExternalNot assessedS0European Union Public Licence: the README text cites v1.1 and the repository lists EUPL-1.2
Open-MeteoDatasetExternalNot assessedS0Data: CC BY 4.0. Code: AGPLv3. Free non-commercial use up to 10,000 calls a day.
OpenEnergyMonitorToolExternalNot assessedS2Not stated on the pages opened
TI-UP Enquiry: Micro-Hydropower - Low Head TurbinesGuideExternalEstablishedS3Not stated on the pages read

Depends on, and completes

Depends on 5.1, 5.2.

It is one of 23 elements that complete Energy.

The standing questions

Who holds the water right. Who clears the intake after every storm. Who decides how water is shared between power, farms and fish.

Environments

Islands and coasts. No source found.

Arctic cold. No source found on freezing of intakes and channels.

Hot deserts. No source found.

Tropical humid forest. Practical Action installed a river current turbine in the Amazon area of Peru (TI-UP Enquiry: Micro-Hydropower - Low Head Turbines).

Temperate forest. No source found.

High altitude. No source found on high-head schemes; Kathmandu University in Nepal has worked on an open-flume low-head design (TI-UP Enquiry: Micro-Hydropower - Low Head Turbines).

Flood plains. Spillways protect the channel from excess flow (Micro Hydro Power (MHP) Plants). On flat land with little fall, low-head turbines in rivers and irrigation canals are the option; family systems of 200 to 1,000 W were planned for streams and canals in the Philippines (TI-UP Enquiry: Micro-Hydropower - Low Head Turbines).

Other harsh settings. Summer low flows reduce output and need planning (Micro Hydro Power (MHP) Plants).

Safety

State and evidence

Drafted

An editor has written the element's text from the resources listed under it, citing them. It is checked when it is reviewed.

Evidence from a real place or system is recorded here, with what did not work. What the states mean

History