Public Protocol
Platform

Element 5.22

Solar photovoltaics for every climate

Sheet
5.22
Chapter
5 Energy
State
Drafted
Release
16 November 2026
Editor
Contributed by Praecise as open research
Reviewers
To be named at review
Safety
S3, as the chapter
Licence
CC BY-SA 4.0
Resources
21

The element

Requirement

The community's solar modules, mounting and layout are chosen for its own climate, qualified to the international module standards, sized from public resource data for the exact site, installed by a competent person, and watched year by year for loss of output.

How to tell

Every module is certified to IEC 61215-1 for design qualification and IEC 61730-1 for safety (IEC 61215-1:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements) (IEC 61730-1:2023 Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction). IEC 61215-1 states that its test results are not a quantitative prediction of module lifetime (IEC 61215-1:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements). IEC 61730-1 covers modules whose 98th-percentile operating temperature is 70 degrees C or less and points to IEC TS 63126 for hotter conditions (IEC 61730-1:2023 Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction). Yield is read for the site from the Global Solar Atlas, whose layers are about 250 m and licensed CC BY 4.0 (Global Solar Atlas GIS data (World Bank Data Catalog)), or from PVGIS (PVGIS). Measured output is compared each year with the model. A study of more than 7.2 GW in the United States found an overall loss of 0.75% a year (Photovoltaic fleet degradation insights), and 90% of systems lost less than 2% a year (NREL says long-term degradation of 8 GW of U.S. solar 'matches expectations'): a system losing more than that is among the worst tenth and needs inspection.

Options

Fixed monofacial arrays. The simplest choice, with no moving parts. Commercial wafer-based modules have risen from about 17% to just under 25% efficiency in ten years, and energy payback is about one year depending on location (Photovoltaics Report).

Bifacial modules and single-axis trackers. Tracking adds 15% to 25% over fixed tilt; bifacial modules on trackers add a further 4% to 15% depending on module type and ground reflectance, 9% on average (Model and Validation of Single-Axis Tracking with Bifacial PV). Trackers add motors and bearings to maintain.

Agrivoltaics. Farming and generation on the same land; Fraunhofer ISE's guideline covers potential, examples and obstacles (Agrivoltaics: Opportunities for Agriculture and the Energy Transition. A Guideline for Germany).

Floating arrays. On reservoirs and ponds. The World Bank names reduced evaporation and higher yield from water cooling, and also a limited track record, water quality, anchoring and maintenance as challenges (Where Sun Meets Water: Floating Solar Market Report).

Building-integrated PV. Modules as roof or facade. IEA PVPS Task 15 states that fire safety and glare still lack clear test methods or thresholds (IEA PVPS Task 15: Enabling Framework for the Development of BIPV).

Tandem and perovskite modules. Laboratory records are 34.85% (certified by NREL) and 35.5% (certified by the EU's ESTI) for perovskite-silicon tandem cells (34.85%! LONGi Breaks World Record for Crystalline Silicon-Perovskite Tandem Solar Cell Efficiency Again) (Longi sets new world record with 35.5%-efficient perovskite-silicon tandem cell); the maker of the latter had no mass-production plan in June 2026. One tandem module entered commercial use in 2024 (20% more powerful tandem solar panels enter commercial use for the first time in the US).

Settled, open, contested

Settled. Certified modules; yield checked against public data before purchase. Arrays work at hazardous direct-current voltages, and roof work is work at height: S3 where grid-connected or on roofs, done by qualified people.

Open. Perovskite durability. The best outdoor perovskite mini-module in a two-year Cyprus trial kept 78% of its efficiency after one year (EnergyVille/imec and partners show outdoor stability of highly anticipated perovskite solar modules).

Contested. Trackers and bifacial modules for small sites: more energy per module against more parts to maintain.

The four stages

Learn: the state of the market and the technology (Photovoltaics Report) (Snapshot of Global PV Markets 2026) (Best Research-Cell Efficiency Chart). Design: resource and yield from (Global Solar Atlas GIS data (World Bank Data Catalog)) and (PVGIS); detailed modelling with (System Advisor Model (SAM)) or (pvlib python). Build: certified modules (IEC 61215-1:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements) (IEC 61730-1:2023 Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction); off-grid systems to the IEC 62257 series (IEC TS 62257-100:2022 Renewable energy off-grid systems - Part 100: Overview of the IEC 62257 series), designed and signed off by a qualified electrician; this page gives no installation procedure. Deploy: log output (OpenEnergyMonitor) and compare yearly loss with the fleet figures (Photovoltaic fleet degradation insights).

Resources at each stage

What changes between 30 adults and 300 people

For 30 adults, fixed roof or ground arrays keep maintenance to cleaning and inspection. For 300 people, a ground array large enough to justify trackers, agrivoltaics on shared land or a floating array on a reservoir becomes worth comparing in a model, and needs a named maintainer.

Reference designs

  • Reference design

    Photovoltaics Report

    A regularly updated slide report on the photovoltaic market and technology, here in the version of 14 July 2026. Its page states that commercial wafer-based module efficiency rose from about 17% to just under 25% in ten years, records lab cells at 27.9% (mono-silicon), 26.9% (perovskite) and 47.6% (concentrator), an energy payback time of about one year depending on location, a price fall of about 26.7% for each doubling of cumulative production, and a typical cost of about 4 euro cents per kWh for large plants.

    External resource. Not made or verified by Public ProtocolMaturity: EstablishedSafety S0Open or commercial: not stated by the makerListed 16 November 2026
  • Reference design

    Snapshot of Global PV Markets 2026

    IEA PVPS Task 1 report of April 2026. Its page estimates 698 GW of PV installed worldwide in 2025, cumulative capacity of nearly 3 TW, PV supplying more than 10% of global electricity demand, and nearly 40 countries installing at least 1 GW each.

    External resource. Not made or verified by Public ProtocolMaturity: EstablishedSafety S0Listed 16 November 2026

Parts list

Every resource that supports this element. Those marked External carry the label “External resource. Not made or verified by Public Protocol”.

ResourceTypeOriginMaturitySafetyLicence, as stated at its source
Model and Validation of Single-Axis Tracking with Bifacial PVPaperExternalEstablishedS0Not stated on the page opened
Agrivoltaics: Opportunities for Agriculture and the Energy Transition. A Guideline for GermanyGuideExternalEstablishedS0Not stated on the page opened
Photovoltaics ReportReference designExternalEstablishedS0Not stated on the page opened
Global Solar Atlas GIS data (World Bank Data Catalog)DatasetExternalEstablishedS0Creative Commons Attribution 4.0
Snapshot of Global PV Markets 2026Reference designExternalEstablishedS0Not stated on the page opened
IEA PVPS Task 15: Enabling Framework for the Development of BIPVFrameworkExternalWorkingS2Not stated on the page opened
IEC 61215-1:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirementsStandardExternalEstablishedS2Not stated on the page opened
IEC 61730-1:2023 Photovoltaic (PV) module safety qualification - Part 1: Requirements for constructionStandardExternalEstablishedS2Not stated on the page opened
IEC TS 62257-100:2022 Renewable energy off-grid systems - Part 100: Overview of the IEC 62257 seriesStandardExternalEstablishedS2Not stated on the page opened
EnergyVille/imec and partners show outdoor stability of highly anticipated perovskite solar modulesCase studyExternalPrototypeS0Not stated on the page opened
Photovoltaic fleet degradation insightsPaperExternalEstablishedS0Not stated on the page opened
34.85%! LONGi Breaks World Record for Crystalline Silicon-Perovskite Tandem Solar Cell Efficiency AgainCase studyExternalPrototypeS0Not stated on the page opened
Best Research-Cell Efficiency ChartDatasetExternalEstablishedS0The plot is not copyrighted and may be used in presentations and publications, with a notation that states: "This plot is courtesy of the National Laboratory of the Rockies, Golden, CO."
System Advisor Model (SAM)ToolExternalEstablishedS0BSD-3-Clause (the bundled Sandia stepwise and LHS libraries are under LGPL)
OpenEnergyMonitorToolExternalNot assessedS2Not stated on the pages opened
20% more powerful tandem solar panels enter commercial use for the first time in the USCase studyExternalNot assessedS0Not stated on the page opened
Longi sets new world record with 35.5%-efficient perovskite-silicon tandem cellCase studyExternalPrototypeS0Not stated on the page opened
NREL says long-term degradation of 8 GW of U.S. solar 'matches expectations'Case studyExternalEstablishedS0Not stated on the page opened
PVGISToolExternalEstablishedS0Not stated on the tool page opened
pvlib pythonLibraryExternalEstablishedS0BSD 3-clause
Where Sun Meets Water: Floating Solar Market ReportGuideExternalEstablishedS0Not stated on the page opened

Depends on, and completes

Depends on 5.1, 5.2.

It is one of 23 elements that complete Energy.

The standing questions

Who pays for modules certified to the standards. Who inspects and cleans. Who decides between roofs, fields and water.

Environments

Islands and coasts. Floating arrays suit reservoirs where land is scarce (Where Sun Meets Water: Floating Solar Market Report). For salt air, no open field source was opened in this work.

Arctic cold. Cooler climates showed a median loss of 0.48% a year (Photovoltaic fleet degradation insights); snow deeper than 1 m accelerated degradation (NREL says long-term degradation of 8 GW of U.S. solar 'matches expectations').

Hot deserts. Hotter climates showed a median loss of 0.88% a year (Photovoltaic fleet degradation insights); above a 70 degrees C 98th-percentile module temperature, IEC TS 63126 applies (IEC 61730-1:2023 Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction). No open source with soiling figures was opened.

Tropical humid forest. No source found.

Temperate forest. No source found.

High altitude. No source found.

Flood plains. In the US fleet, the longest outages after extreme events came mostly from flooding and rain (NREL says long-term degradation of 8 GW of U.S. solar 'matches expectations').

Other harsh settings. Hail over 25 mm and winds over 90 km/h accelerated degradation (NREL says long-term degradation of 8 GW of U.S. solar 'matches expectations').

Safety

State and evidence

Drafted

An editor has written the element's text from the resources listed under it, citing them. It is checked when it is reviewed.

Evidence from a real place or system is recorded here, with what did not work. What the states mean

History