Element 11.12
Coatings and corrosion protection
- Sheet
- 11.12
- Chapter
- 11 Materials and supply
- State
- Drafted
- Release
- 16 November 2026
- Editor
- Contributed by Praecise as open research
- Reviewers
- To be named at review
- Safety
- S1, as the chapter
- Licence
- CC BY-SA 4.0
- Resources
- 8
The element
- Requirement
Metal that the community depends on is protected by a system chosen for the corrosivity of its site, and coatings and treatments are screened for hazard before they are bought.
- How to tell
- The site's corrosivity category is recorded. ISO 12944-2 classes atmospheres from C1, very low, such as a climate-controlled indoor space, to C5, very high, such as a coastal refinery, and CX for offshore; immersion categories include Im4, added in 2018 (Categorising corrosivity by type of environment). The ISO 9223 categories come with typical first-year zinc corrosion rates (HDG Corrosion Rates for ISO Categories C1-C5/X).
- The protection system is named by its standard: paint systems under the ISO 12944 series (ISO 12944-1:2017 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction), hot-dip galvanizing under ISO 1461 (ISO 1461:2022 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods).
- Every coating, primer and treatment is checked against the SIN List (SIN List) and its safety data sheet is read before use (Chemical safety data sheets).
- Options
- Hot-dip galvanizing of fabricated steel, to ISO 1461; the standard excludes continuously galvanized sheet and wire, and after-treatment or overcoating (ISO 1461:2022 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods).
- Paint systems specified under ISO 12944 for the site's category (ISO 12944-1:2017 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction).
- Galvanizing plus paint, where the category is high; zinc loss rates by category guide the choice (HDG Corrosion Rates for ISO Categories C1-C5/X).
- Material choice: stainless steel, aluminium or non-metals where coatings would not last; the machines and structures passes cover selection.
- Plant-extract corrosion inhibitors: reviewed in 2024 as alternatives to toxic inhibitors; the review states that data for different steels are scarce (Plant extracts as green corrosion inhibitors for different kinds of steel: A review). Research stage.
- Functional coatings: the authors of a radiative cooling ceramic claim colour stability and weather resistance as advantages over polymer coatings (Hierarchically structured passive radiative cooling ceramic with high solar reflectivity). Laboratory result.
- Settled, open, contested
Settled: corrosivity categories and the standards for galvanizing and paint systems are established (Categorising corrosivity by type of environment, ISO 1461:2022 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods). Open: the field performance of plant-extract inhibitors (Plant extracts as green corrosion inhibitors for different kinds of steel: A review). The cost of corrosion is large: the review cites a NACE estimate of about 5% of global GDP (Plant extracts as green corrosion inhibitors for different kinds of steel: A review); the original study was not opened. Contested: no disagreement found in the sources opened.
The four stages
- Learn: the corrosivity classes (Categorising corrosivity by type of environment, HDG Corrosion Rates for ISO Categories C1-C5/X).
- Design: choose the system for the category and the design life (ISO 12944-1:2017 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction, ISO 1461:2022 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods).
- Build: buy from a galvanizer or coater working to the standard; screen products (SIN List, Chemical safety data sheets).
- Deploy: inspect on a schedule; follow research on safer inhibitors (Plant extracts as green corrosion inhibitors for different kinds of steel: A review).
Resources at each stage
1 Learn
Understand
- HDG Corrosion Rates for ISO Categories C1-C5/X Guide, S0
- Plant extracts as green corrosion inhibitors for different kinds of steel: A review Paper, S1
- Chemical safety data sheets Guide, S1
- Categorising corrosivity by type of environment Guide, S0
- Hierarchically structured passive radiative cooling ceramic with high solar reflectivity Paper, S0
2 Design
Size and choose
- HDG Corrosion Rates for ISO Categories C1-C5/X Guide, S0
- SIN List Dataset, S1
- Categorising corrosivity by type of environment Guide, S0
- ISO 12944-1:2017 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction Standard, S1
- ISO 1461:2022 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods Standard, S1
3 Build
Build or obtain
4 Deploy
Install, run and measure
What changes between 30 adults and 300 people
At 30 adults, the work is choosing galvanized or suitably coated parts when buying and touching up damage. At 300 people, there is an asset register of exposed metal with its category, coating and inspection date, and coatings are bought to a written specification.
Reference designs
Open for contributions Designs with drawings, specifications and a bill of materials. Add to it
Parts list
Every resource that supports this element. Those marked External carry the label “External resource. Not made or verified by Public Protocol”.
Depends on, and completes
It is one of 19 elements that complete Materials and supply.
The standing questions
Who inspects. Who pays to recoat. Who decides when a corroded part is replaced.
Environments
coastal sites fall in the high categories; C5 includes coastal refineries and CX covers offshore (Categorising corrosivity by type of environment), and CX includes splash zones (HDG Corrosion Rates for ISO Categories C1-C5/X).
some polar regions are listed among C1, very low, environments (HDG Corrosion Rates for ISO Categories C1-C5/X).
some deserts are listed among C1, very low, environments (HDG Corrosion Rates for ISO Categories C1-C5/X).
no source found.
no source found.
no source found.
immersion categories apply to parts that stand in water (Categorising corrosivity by type of environment).
Other harsh settings
no source found.
Environment profiles for these settings: Small islands and coasts; Arctic, subarctic and permafrost, including sea ice; Extreme cold; Hot deserts; Extreme heat; Tropical rainforest and humid tropics; High humidity; Temperate and boreal forests; Mountains and high altitude; River deltas and flood plains. All environments
Safety
State and evidence
Drafted
An editor has written the element's text from the resources listed under it, citing them. It is checked when it is reviewed.
Evidence from a real place or system is recorded here, with what did not work. What the states mean
History
- Drafted in the release of 16 November 2026.