Environment
Extreme cold
Prolonged or severe cold.
- Climate classes
- Strongest in D and E climates; Dfd and Dwd mark a coldest month below -38 °C
- Elements that discuss it
- 64
- Sources
- 13
- Editor
- Contributed by Praecise as open research
- Release
- 16 November 2026
What defines it
Prolonged or severe cold. In the Köppen-Geiger scheme, the letter d in cold climates marks a coldest month below -38 °C (Present and future Köppen-Geiger climate classification maps at 1-km resolution). Cold can also strike places unused to it: NIOSH notes that near-freezing temperatures can cause cold stress in regions unaccustomed to winter (Cold and Work: Types, Causes, Preparation).
What it changes
Health and care
Cold stress includes hypothermia, frostbite, trench foot and chilblains (Cold and Work: Types, Causes, Preparation). NIOSH lists measures for employers, such as scheduling cold work for warmer times, relief workers, warm break areas and warm drinks, and for workers, such as loose layers, protecting ears, face, hands and feet, carrying spare dry clothes and not touching cold metal with bare skin (Cold and Work: Types, Causes, Preparation). Fresh snow raises ultraviolet exposure (Ultraviolet radiation (WHO fact sheet)).
Energy
Heating dominates, and its fuel shapes health: in Ulaanbaatar, switching to clean heating would cut winter PM2.5 exposure by 80 per cent and the death and disability burden by about 85 per cent, a modelling study found (Health assessment of future PM2.5 exposures from indoor, outdoor, and secondhand tobacco smoke concentrations under alternative policy pathways in Ulaanbaatar, Mongolia). Batteries cannot charge in deep cold: one lithium iron phosphate range charges only from +5 °C and discharges from -20 °C (12,8 and 25,6 Volt Lithium Iron Phosphate Batteries Smart: datasheet); another maker says not to charge below about 25 °F (about -4 °C) without internal heating, and that capacity falls temporarily in the cold (Understanding Temperature Limits of LiFePO4 Batteries). Cold-climate heat pumps are covered in (The Future of Heat Pumps).
Shelter and construction
Frozen ground behaves like rock until it thaws; permafrost underlies about a quarter of exposed Northern Hemisphere land (Frozen Ground and Permafrost), and thaw threatens about 70 per cent of current infrastructure in the permafrost domain by 2050 (Degrading permafrost puts Arctic infrastructure at risk by mid-century). Fuel-burning heaters in sealed buildings bring carbon monoxide risk; see (WHO Guidelines for indoor air quality: Household fuel combustion).
Food and farming
What grows here, and how
Outdoor growing stops for the cold season. Protected growing extends it: the Inuvik community greenhouse, two degrees above the Arctic Circle, grows in a former arena under polycarbonate glazing (Inuvik community greenhouse: a profile of promising practice). Livestock are the most exposed: in the 2009/2010 Mongolian dzud, herders around one protected area lost 67 per cent of their animals on average (The danger of having all your eggs in one basket: winter crash of the re-introduced Przewalski's horses in the Mongolian Gobi).
Electronics and circuit design
Check minimum ambient ratings; one common ESP32 module is rated from -40 °C (ESP32-WROOM-32E and ESP32-WROOM-32UE Datasheet). Tests: cold, IEC 60068-2-1 (Test A), and change of temperature, 60068-2-14 (Test N) (IEC 60068 (Wikipedia article), IEC 60068-2 Environmental testing, Part 2: Tests (all parts)). Condensation forms when cold equipment meets warm air; keep components in a non-condensing atmosphere (ESP32-WROOM-32E and ESP32-WROOM-32UE Datasheet).
Equipment in this environment
- Rated minimum operating and storage temperatures for every device (ESP32-WROOM-32E and ESP32-WROOM-32UE Datasheet, 12,8 and 25,6 Volt Lithium Iron Phosphate Batteries Smart: datasheet).
- Battery heating or insulated, heated enclosures where charging below the limit is likely (Understanding Temperature Limits of LiFePO4 Batteries).
- Cold and thermal cycling tests: IEC 60068-2-1 and 60068-2-14 (IEC 60068 (Wikipedia article)).
Hazards and readiness
Hypothermia and frostbite (Cold and Work: Types, Causes, Preparation), livestock loss in severe winters (The danger of having all your eggs in one basket: winter crash of the re-introduced Przewalski's horses in the Mongolian Gobi), indoor air pollution from heating (Health assessment of future PM2.5 exposures from indoor, outdoor, and secondhand tobacco smoke concentrations under alternative policy pathways in Ulaanbaatar, Mongolia), frozen and thawing ground (Degrading permafrost puts Arctic infrastructure at risk by mid-century).
At the frontier
- Clean heating in place of coal in cold cities. Maturity: Concept in the source, a modelling study (Health assessment of future PM2.5 exposures from indoor, outdoor, and secondhand tobacco smoke concentrations under alternative policy pathways in Ulaanbaatar, Mongolia).
- Batteries with internal heating, which one maker names as the condition for charging below about -4 °C. Maturity: Not assessed; the source does not describe the products (Understanding Temperature Limits of LiFePO4 Batteries).
Communities living here
Ulaanbaatar, Mongolia (Health assessment of future PM2.5 exposures from indoor, outdoor, and secondhand tobacco smoke concentrations under alternative policy pathways in Ulaanbaatar, Mongolia); herders of the Mongolian Gobi (The danger of having all your eggs in one basket: winter crash of the re-introduced Przewalski's horses in the Mongolian Gobi); Inuvik, Canada (Inuvik community greenhouse: a profile of promising practice). See also the Arctic and cold desert profiles.
Gaps
- No source on cold-wave mortality, freeze protection of water systems or snow loads was opened.
Elements that discuss it
1 Place and planning
- 1.2 Climate and hazard data
- 1.8 Ground sensing networks for a place
- 1.9 Mapping ice, forest canopy, coasts and mountains
- 1.11 Receiving satellite data and community ground stations
- 1.12 Surveying the ground: GNSS, reference stations and boundaries
- 1.13 Using satellite imagery
3 Water
- 3.1 Source and yield
- 3.3 Treatment
- 3.5 Quality testing
- 3.7 Desalination for islands, coasts and saline inland sites
- 3.8 Fog, dew and water from air
- 3.9 Rainwater harvesting
- 3.10 Reuse of greywater and recycled water
- 3.11 Reverse osmosis and membrane treatment
- 3.12 Storage, distribution, hot water and water safety plans
- 3.13 Wells, boreholes and springs
4 Food and farming
- 4.1 Soil
- 4.4 Animals
- 4.11 Light, climate and energy for indoor and protected growing
- 4.14 Seeds and seed sovereignty
- 4.16 Soilless growing: hydroponics, aeroponics and aquaponics
- 4.17 Ponds, cages and fish farmed with crops
- 4.19 Recirculating systems and aquaponics
- 4.21 Shellfish and seaweed farming at sea
- 4.23 Food from water: choosing species and systems
- 4.24 Water quality and smart monitoring for fish
- 4.25 Food from water where land farming fails
- 4.26 Community-scale food processing
6 Shelter and construction
- 6.3 Envelope
- 6.9 Underground and earth-sheltered rooms: radon, damp and air
- 6.10 Building for extreme climates
- 6.11 Interiors for health and function
- 6.12 Low-carbon structural systems and off-site building
- 6.17 Concrete, masonry and earth structures
- 6.19 Masts, towers, tanks, greenhouses and mounting structures
- 6.21 Steel, aluminium and composite structures
- 6.22 Timber and bamboo structures
8 Health and care
9 Manufacturing and repair
- 9.14 Designing a machine
- 9.15 Machine safety by design
- 9.16 Machines for local production and recovered materials
- 9.17 Mechanisms, motion and drives
- 9.19 Open machine libraries
- 9.20 Safe handling of nanomaterials, resins and solvents
- 9.24 Mobile, aerial and underwater robots
10 Electronics and circuit design
- 10.7 Choosing a microcontroller platform
- 10.8 Enclosures and harsh-environment hardening
- 10.10 Low-power and battery-powered devices
11 Materials and supply
- 11.8 Choosing materials for parts and machines
- 11.9 Battery and solar cell materials
- 11.10 Bio-based materials
- 11.11 Bioplastics and their end of life
- 11.12 Coatings and corrosion protection
- 11.13 Open materials data and AI discovery
- 11.14 Reading claims about new materials
- 11.15 Sorbents and membranes for water and air
- 11.16 Choosing a structural material
12 Mobility and transport
13 Digital infrastructure
20 Safety, resilience and disaster readiness
22 Delivery, operations and measurement
Sources
- Present and future Köppen-Geiger climate classification maps at 1-km resolution Paper, S0
- Cold and Work: Types, Causes, Preparation Guide, S2
- 12,8 and 25,6 Volt Lithium Iron Phosphate Batteries Smart: datasheet Guide, S2
- Understanding Temperature Limits of LiFePO4 Batteries Guide, S2
- ESP32-WROOM-32E and ESP32-WROOM-32UE Datasheet Guide, S0
- IEC 60068 (Wikipedia article) Guide, S0
- IEC 60068-2 Environmental testing, Part 2: Tests (all parts) Standard, S0
- Frozen Ground and Permafrost Guide, S0
- Degrading permafrost puts Arctic infrastructure at risk by mid-century Paper, S0
- Health assessment of future PM2.5 exposures from indoor, outdoor, and secondhand tobacco smoke concentrations under alternative policy pathways in Ulaanbaatar, Mongolia Paper, S0
- The danger of having all your eggs in one basket: winter crash of the re-introduced Przewalski's horses in the Mongolian Gobi Paper, S0
- Inuvik community greenhouse: a profile of promising practice Case study, S0
- Ultraviolet radiation (WHO fact sheet) Guide, S0
External resource. Not made or verified by Public Protocol, where the entry is external.