Environment
Tropical rainforest and humid tropics
Tropical climates in the Köppen-Geiger criteria have a coldest month at or above 18 °C; f marks rainforest, m monsoon and w savanna.
- Climate classes
- Af (tropical rainforest: coldest month at or above 18 °C)
Am (tropical monsoon) - Elements that discuss it
- 59
- Sources
- 20
- Editor
- Contributed by Praecise as open research
- Release
- 16 November 2026
What defines it
Tropical climates (A) in the Köppen-Geiger criteria have a coldest month at or above 18 °C; f marks rainforest, m monsoon and w savanna (Present and future Köppen-Geiger climate classification maps at 1-km resolution). This profile covers Af and Am; savanna (Aw) is in its own profile. The 1 km maps show these classes from 1901 to 2099 (High-resolution (1 km) Köppen-Geiger maps for 1901-2099 based on constrained CMIP6 projections). Tropical forests make up 45 per cent of the world's 4.06 billion hectares of forest (Global Forest Resources Assessment 2020: key findings).
What it changes
Constant warmth and high humidity speed up growth, decay, corrosion and disease. Heavy rain shapes water, sanitation and roads.
Water
Rain is plentiful in most months, but monsoon climates have a dry season. No open source opened in this work measured household water systems in the humid tropics; see (Guidelines for drinking-water quality: small water supplies) and (Guidelines for drinking-water quality).
Food and farming
What grows here, and how
Year-round warmth allows continuous growing, but heavy rain leaches soils, so tree-based systems are long-standing. Lake and soil records from the eastern Amazon show about 4,500 years of polyculture agroforestry: people enriched closed forest with edible plants, cleared little, used low-severity fire and combined annual crops with forest and aquatic foods (The legacy of 4,500 years of polyculture agroforestry in the eastern Amazon). Cacao is grown under shade: in the Peruvian Amazon a decade-long trial compared keeping native trees for 50 per cent shade with clearing and burning, across ten cacao genotypes; soil organic matter and several nutrients declined with years of cultivation in both systems (Changes in soil physical and chemical properties in long term improved natural and traditional agroforestry management systems of cacao genotypes in Peruvian Amazon). Secondary forests that regrow after shifting cultivation in the Philippine uplands store more carbon the longer they are left (Tropical secondary forests regenerating after shifting cultivation in the Philippines uplands are important carbon sinks). Insects are a documented food: the Democratic Republic of the Congo has 255 recorded edible species, Thailand 272, Brazil 140 and Cameroon 100 (The global atlas of edible insects: analysis of diversity and commonality contributing to food systems and sustainability). Storage losses to damp and pests are high in warm humid air; see (Purdue Improved Crop Storage (PICS)) and (Small-Scale Postharvest Handling Practices: A Manual for Horticultural Crops (4th edition)).
Energy
Cloud cuts solar output in wet seasons; solar estimates for a site can be made with (PVGIS). Battery housings need ventilation: one lithium iron phosphate range is rated to discharge only up to +50 °C (12,8 and 25,6 Volt Lithium Iron Phosphate Batteries Smart: datasheet).
Shelter and construction
Persistent dampness and mould in buildings are linked with respiratory symptoms, allergies and asthma; WHO's main recommendation is to prevent persistent dampness and microbial growth in the structure (WHO guidelines for indoor air quality: dampness and mould). Daily highs of 31 to 33 °C are normal in Kuala Lumpur, so heat thresholds must be local (Extreme Heat (WMO)).
Waste, sanitation and material cycles
Warmth speeds composting and also pathogen growth; heavy rain floods pits. No humid-tropics source was opened in this work; see (Compendium of Sanitation Systems and Technologies) and (Guidelines on sanitation and health).
Health and care
Malaria caused 282 million cases and 610,000 deaths in 2024; insecticide-treated nets and indoor residual spraying are the core controls, and two vaccines are recommended for children (Malaria (WHO fact sheet)). Heat risk applies to outdoor workers and people in housing without cooling (Heat and health (WHO fact sheet)). Damp housing affects breathing (WHO guidelines for indoor air quality: dampness and mould).
Electronics and circuit design
Humidity and condensation are the main threats. Relevant tests are damp heat, cyclic (IEC 60068-2-30), damp heat, steady state (IEC 60068-2-78) and mould growth (IEC 60068-2-10) (IEC 60068 (Wikipedia article), IEC 60068-2 Environmental testing, Part 2: Tests (all parts)). Components absorb moisture: one ESP32 module is moisture sensitivity level 3, must be stored sealed below 40 °C and 90 per cent relative humidity, and must be soldered within 168 hours of opening or baked (ESP32-WROOM-32E and ESP32-WROOM-32UE Datasheet).
Materials and supply
Long wet periods raise corrosivity: ISO 9223 category C5, with zinc loss of 4.2 to 8.4 µm a year, is described for subtropical to tropical areas with long wet periods and heavy pollution or chlorides (HDG Corrosion Rates for ISO Categories C1-C5/X). Timber decays and is attacked by insects faster; no source on this was opened (gap).
Mobility and transport
No source found in this work.
Communications and connectivity
No source found in this work.
Safety, resilience and disaster readiness
Tropical cyclones affect monsoon and coastal tropics (Tropical cyclone (WMO)). Floods and landslides from heavy rain are not covered by any source opened here (gap).
Ecology, biodiversity and climate
Deforestation was about 10 million hectares a year in 2015 to 2020, and primary forest has fallen by 81 million hectares since 1990 (Global Forest Resources Assessment 2020: key findings). Mangroves on tropical coasts are losing protective height and width faster than area (Global distribution and decline of mangrove coastal protection extends far beyond area loss).
Delivery, operations and measurement
Log humidity and enclosure temperature next to equipment; dew forms where surfaces fall below the dew point. No operations source was opened.
Equipment in this environment
- Humidity: damp heat tests IEC 60068-2-30 and 60068-2-78; mould growth 60068-2-10 (IEC 60068 (Wikipedia article)).
- Ingress: driving rain needs at least IPX4 (splashing from any direction) and often IPX5 or IPX6 (jets) (IP code (Wikipedia article), IEC 60529:1989+AMD1:1999+AMD2:2013 Degrees of protection provided by enclosures (IP Code)).
- Components: respect moisture sensitivity levels and baking rules (ESP32-WROOM-32E and ESP32-WROOM-32UE Datasheet).
- Corrosion: up to C5 with long wetness and pollution (HDG Corrosion Rates for ISO Categories C1-C5/X).
- Batteries: shade and ventilate; upper discharge limit +50 °C for one range (12,8 and 25,6 Volt Lithium Iron Phosphate Batteries Smart: datasheet).
Hazards and readiness
Malaria and other vector-borne disease (Malaria (WHO fact sheet)), heat (Heat and health (WHO fact sheet)), cyclones (Tropical cyclone (WMO)), damp housing (WHO guidelines for indoor air quality: dampness and mould). Flood and landslide sources are a gap.
At the frontier
- Malaria vaccines RTS,S/AS01 and R21/Matrix-M, recommended by WHO in 2021 and 2023. Maturity: Established (Malaria (WHO fact sheet), WHO recommends R21/Matrix-M vaccine for malaria prevention in updated advice on immunization).
- Recognition of regrowing secondary forest after shifting cultivation as a carbon sink. Maturity: Replicated in the literature (Tropical secondary forests regenerating after shifting cultivation in the Philippines uplands are important carbon sinks).
Communities living here
- The eastern Amazon, where pre-Columbian people practised polyculture agroforestry for about 4,500 years (The legacy of 4,500 years of polyculture agroforestry in the eastern Amazon).
- Cacao growers in the Peruvian Amazon (Changes in soil physical and chemical properties in long term improved natural and traditional agroforestry management systems of cacao genotypes in Peruvian Amazon).
- Upland farmers practising shifting cultivation (kaingin) in the Philippines (Tropical secondary forests regenerating after shifting cultivation in the Philippines uplands are important carbon sinks).
Gaps
- No source on household water, sanitation, transport, communications, floods or landslides in the humid tropics was opened.
- No source on timber decay or termite resistance.
Elements that discuss it
1 Place and planning
- 1.2 Climate and hazard data
- 1.6 Community and participatory mapping
- 1.8 Ground sensing networks for a place
- 1.9 Mapping ice, forest canopy, coasts and mountains
- 1.11 Receiving satellite data and community ground stations
- 1.12 Surveying the ground: GNSS, reference stations and boundaries
- 1.13 Using satellite imagery
3 Water
- 3.1 Source and yield
- 3.3 Treatment
- 3.5 Quality testing
- 3.7 Desalination for islands, coasts and saline inland sites
- 3.8 Fog, dew and water from air
- 3.9 Rainwater harvesting
- 3.10 Reuse of greywater and recycled water
- 3.11 Reverse osmosis and membrane treatment
- 3.12 Storage, distribution, hot water and water safety plans
- 3.13 Wells, boreholes and springs
4 Food and farming
- 4.1 Soil
- 4.12 Trees, perennials and mixed systems: agroforestry, permaculture and plantations
- 4.13 Pests, weeds and plant diseases
- 4.15 Smart farming: sensors, data, satellites and AI
- 4.16 Soilless growing: hydroponics, aeroponics and aquaponics
- 4.17 Ponds, cages and fish farmed with crops
- 4.18 Handling, processing and preserving fish
- 4.21 Shellfish and seaweed farming at sea
- 4.23 Food from water: choosing species and systems
- 4.24 Water quality and smart monitoring for fish
- 4.26 Community-scale food processing
6 Shelter and construction
- 6.3 Envelope
- 6.9 Underground and earth-sheltered rooms: radon, damp and air
- 6.10 Building for extreme climates
- 6.11 Interiors for health and function
- 6.12 Low-carbon structural systems and off-site building
- 6.22 Timber and bamboo structures
8 Health and care
- 8.10 Vector control
- 8.16 Essential diagnostics and point-of-care tests
- 8.21 Medicine in remote and harsh environments
9 Manufacturing and repair
- 9.14 Designing a machine
- 9.15 Machine safety by design
- 9.16 Machines for local production and recovered materials
- 9.17 Mechanisms, motion and drives
- 9.19 Open machine libraries
- 9.20 Safe handling of nanomaterials, resins and solvents
10 Electronics and circuit design
- 10.7 Choosing a microcontroller platform
- 10.8 Enclosures and harsh-environment hardening
- 10.10 Low-power and battery-powered devices
11 Materials and supply
- 11.8 Choosing materials for parts and machines
- 11.9 Battery and solar cell materials
- 11.10 Bio-based materials
- 11.11 Bioplastics and their end of life
- 11.12 Coatings and corrosion protection
- 11.13 Open materials data and AI discovery
- 11.14 Reading claims about new materials
- 11.15 Sorbents and membranes for water and air
- 11.16 Choosing a structural material
20 Safety, resilience and disaster readiness
22 Delivery, operations and measurement
Sources
- Present and future Köppen-Geiger climate classification maps at 1-km resolution Paper, S0
- High-resolution (1 km) Köppen-Geiger maps for 1901-2099 based on constrained CMIP6 projections Dataset, S0
- Global Forest Resources Assessment 2020: key findings Dataset, S0
- The legacy of 4,500 years of polyculture agroforestry in the eastern Amazon Paper, S0
- Changes in soil physical and chemical properties in long term improved natural and traditional agroforestry management systems of cacao genotypes in Peruvian Amazon Paper, S0
- Tropical secondary forests regenerating after shifting cultivation in the Philippines uplands are important carbon sinks Paper, S0
- The global atlas of edible insects: analysis of diversity and commonality contributing to food systems and sustainability Paper, S0
- Malaria (WHO fact sheet) Guide, S0
- WHO guidelines for indoor air quality: dampness and mould Guide, S0
- Heat and health (WHO fact sheet) Guide, S2
- Extreme Heat (WMO) Guide, S0
- Tropical cyclone (WMO) Guide, S0
- HDG Corrosion Rates for ISO Categories C1-C5/X Guide, S0
- IEC 60068-2 Environmental testing, Part 2: Tests (all parts) Standard, S0
- IEC 60068 (Wikipedia article) Guide, S0
- IEC 60529:1989+AMD1:1999+AMD2:2013 Degrees of protection provided by enclosures (IP Code) Standard, S2
- IP code (Wikipedia article) Guide, S0
- ESP32-WROOM-32E and ESP32-WROOM-32UE Datasheet Guide, S0
- 12,8 and 25,6 Volt Lithium Iron Phosphate Batteries Smart: datasheet Guide, S2
- Global distribution and decline of mangrove coastal protection extends far beyond area loss Paper, S0
External resource. Not made or verified by Public Protocol, where the entry is external.