Environment
Extreme heat
Heatwaves are defined against local thresholds: temperatures above 30 °C marked the record 2025 heatwave in sub-Arctic Norway, Sweden and Finland, while daily highs of 31 to 33 °C are normal in Kuala Lumpur; heat building up over successive days and warm nights is what makes it dangerous.
- Climate classes
- Cuts across classes; defined against local thresholds, not one global temperature
- Elements that discuss it
- 64
- Sources
- 10
- Editor
- Contributed by Praecise as open research
- Release
- 16 November 2026
What defines it
Heatwaves are defined against local thresholds: temperatures above 30 °C marked the record 2025 heatwave in sub-Arctic Norway, Sweden and Finland, while daily highs of 31 to 33 °C are normal in Kuala Lumpur; heat building up over successive days and warm nights is what makes it dangerous (Extreme Heat (WMO)). WMO calls extreme heat one of the deadliest weather and climate hazards (Extreme Heat (WMO)).
What it changes
Health and care
WHO estimates 489,000 heat-related deaths a year from 2000 to 2019 studies; those most at risk are people over 65, people with heart, lung, kidney or mental health conditions or diabetes, infants and children, outdoor and manual workers, and poor people in housing without cooling (Heat and health (WHO fact sheet)). Heat causes heat exhaustion and heatstroke, a medical emergency, worsens chronic illness and can cause acute kidney injury (Heat and health (WHO fact sheet)). WMO cites a rise in global heat-related deaths from about 335,000 a year in 1990 to 1999 to 546,000 a year in 2012 to 2021, and US$835 billion in lost labour productivity in 2023 (Extreme Heat (WMO)). Recommended actions include avoiding strenuous activity in the hottest hours, drinking enough, checking on vulnerable people and never leaving children or animals in parked vehicles (Heat and health (WHO fact sheet)).
Shelter and construction
Keep homes cool by ventilating at night and blocking sun in the day (Heat and health (WHO fact sheet)). Buildings and roads absorb and hold heat in cities (Extreme Heat (WMO)). Indoor temperature guidance is in (WHO Housing and health guidelines).
Energy
Heat raises demand on energy systems (Extreme Heat (WMO)) and derates batteries: one lithium iron phosphate range discharges only up to +50 °C (12,8 and 25,6 Volt Lithium Iron Phosphate Batteries Smart: datasheet), another operates up to about 135 °F (about 57 °C) (Understanding Temperature Limits of LiFePO4 Batteries). Heat also disrupts health services through power outages (Heat and health (WHO fact sheet)).
Food and farming
What grows here, and how
Heat raises crop water demand; precise irrigation saves water, as in a date palm trial that cut water use by 64.1 per cent with sensor-scheduled subsurface irrigation (Efficient IoT-Based Control for a Smart Subsurface Irrigation System to Enhance Irrigation Management of Date Palm). Indoor growing moves the problem to energy: lighting can take nearly half of a vertical farm's electricity, its authors state (Optimizing growth efficiency and energy economics in vertical farming through dynamic reduction of blue light in lettuce baby leaf). No source on heat tolerance of specific crops was opened (gap).
Electronics and circuit design
Raspberry Pi boards slow their cores from 80 °C and throttle cores and GPU at 85 °C, a hard limit on all models; the Raspberry Pi 5 fan starts at 50 °C and reaches full speed at 75 °C by default (Raspberry Pi computers documentation). Some ESP32 modules have a 105 °C ambient version (ESP32-WROOM-32E and ESP32-WROOM-32UE Datasheet). The dry heat test is IEC 60068-2-2 (Test B) and simulated solar radiation 60068-2-5 (IEC 60068 (Wikipedia article), IEC 60068-2 Environmental testing, Part 2: Tests (all parts)).
Safety, resilience and disaster readiness
WHO supports heat-health action plans, heat early warning systems and response plans that prioritise health facilities, care homes and schools without cooling (Heat and health (WHO fact sheet)). WMO and WHO have joint guidance on heat-health warning systems (Extreme Heat (WMO)).
Equipment in this environment
- Rated upper ambient temperature for every device; 85 °C or 105 °C versions exist for radio modules (ESP32-WROOM-32E and ESP32-WROOM-32UE Datasheet).
- Expect throttling of single-board computers from 80 °C core temperature (Raspberry Pi computers documentation).
- Batteries: shade, ventilate and keep within maker limits (12,8 and 25,6 Volt Lithium Iron Phosphate Batteries Smart: datasheet, Understanding Temperature Limits of LiFePO4 Batteries).
- Tests: IEC 60068-2-2 dry heat, 60068-2-5 solar radiation (IEC 60068 (Wikipedia article)).
Hazards and readiness
Heatwaves, warm nights and urban heat (Extreme Heat (WMO)); heat illness (Heat and health (WHO fact sheet)); power outages affecting cooling and health services (Heat and health (WHO fact sheet)).
At the frontier
- Heat-health warning systems linked to action plans. Maturity: Established, supported by WHO and WMO (Heat and health (WHO fact sheet), Extreme Heat (WMO)).
- Dynamic LED lighting that cut lighting cost by 40 per cent in a vertical-farm lettuce trial. Maturity: Prototype (Optimizing growth efficiency and energy economics in vertical farming through dynamic reduction of blue light in lettuce baby leaf).
Communities living here
The sources opened describe heat at population scale rather than named communities: Europe's 2003 heatwave killed about 70,000 people and the Russian Federation's in 2010 about 56,000 (Heat and health (WHO fact sheet)); sub-Arctic Norway, Sweden and Finland passed 30 °C in 2025 (Extreme Heat (WMO)).
Gaps
- No source on passive cooling measured in buildings, or on crop heat tolerance, was opened.
Elements that discuss it
1 Place and planning
- 1.2 Climate and hazard data
- 1.8 Ground sensing networks for a place
- 1.9 Mapping ice, forest canopy, coasts and mountains
- 1.11 Receiving satellite data and community ground stations
- 1.12 Surveying the ground: GNSS, reference stations and boundaries
- 1.13 Using satellite imagery
3 Water
- 3.1 Source and yield
- 3.3 Treatment
- 3.5 Quality testing
- 3.7 Desalination for islands, coasts and saline inland sites
- 3.8 Fog, dew and water from air
- 3.9 Rainwater harvesting
- 3.10 Reuse of greywater and recycled water
- 3.11 Reverse osmosis and membrane treatment
- 3.12 Storage, distribution, hot water and water safety plans
- 3.13 Wells, boreholes and springs
4 Food and farming
- 4.1 Soil
- 4.4 Animals
- 4.11 Light, climate and energy for indoor and protected growing
- 4.16 Soilless growing: hydroponics, aeroponics and aquaponics
- 4.17 Ponds, cages and fish farmed with crops
- 4.18 Handling, processing and preserving fish
- 4.19 Recirculating systems and aquaponics
- 4.21 Shellfish and seaweed farming at sea
- 4.23 Food from water: choosing species and systems
- 4.24 Water quality and smart monitoring for fish
- 4.25 Food from water where land farming fails
- 4.26 Community-scale food processing
6 Shelter and construction
- 6.3 Envelope
- 6.9 Underground and earth-sheltered rooms: radon, damp and air
- 6.10 Building for extreme climates
- 6.11 Interiors for health and function
- 6.12 Low-carbon structural systems and off-site building
- 6.17 Concrete, masonry and earth structures
- 6.22 Timber and bamboo structures
8 Health and care
- 8.16 Essential diagnostics and point-of-care tests
- 8.19 Prevention, nutrition and lifestyle medicine
- 8.21 Medicine in remote and harsh environments
9 Manufacturing and repair
- 9.14 Designing a machine
- 9.15 Machine safety by design
- 9.16 Machines for local production and recovered materials
- 9.17 Mechanisms, motion and drives
- 9.19 Open machine libraries
- 9.20 Safe handling of nanomaterials, resins and solvents
- 9.24 Mobile, aerial and underwater robots
10 Electronics and circuit design
- 10.7 Choosing a microcontroller platform
- 10.8 Enclosures and harsh-environment hardening
- 10.10 Low-power and battery-powered devices
11 Materials and supply
- 11.8 Choosing materials for parts and machines
- 11.9 Battery and solar cell materials
- 11.10 Bio-based materials
- 11.11 Bioplastics and their end of life
- 11.12 Coatings and corrosion protection
- 11.13 Open materials data and AI discovery
- 11.14 Reading claims about new materials
- 11.15 Sorbents and membranes for water and air
- 11.16 Choosing a structural material
12 Mobility and transport
- 12.9 Trailers, utility vehicles, tractors and low-volume vehicles
- 12.17 Moving in steep, remote and roadless terrain
13 Digital infrastructure
20 Safety, resilience and disaster readiness
22 Delivery, operations and measurement
Sources
- Extreme Heat (WMO) Guide, S0
- Heat and health (WHO fact sheet) Guide, S2
- Raspberry Pi computers documentation Guide, S0
- ESP32-WROOM-32E and ESP32-WROOM-32UE Datasheet Guide, S0
- 12,8 and 25,6 Volt Lithium Iron Phosphate Batteries Smart: datasheet Guide, S2
- Understanding Temperature Limits of LiFePO4 Batteries Guide, S2
- IEC 60068 (Wikipedia article) Guide, S0
- IEC 60068-2 Environmental testing, Part 2: Tests (all parts) Standard, S0
- Optimizing growth efficiency and energy economics in vertical farming through dynamic reduction of blue light in lettuce baby leaf Paper, S0
- Efficient IoT-Based Control for a Smart Subsurface Irrigation System to Enhance Irrigation Management of Date Palm Paper, S0
External resource. Not made or verified by Public Protocol, where the entry is external.