Environment
Hot deserts
In the Köppen-Geiger criteria used by the 1 km maps, arid climates are those where mean annual precipitation is below ten times a seasonal threshold; deserts fall below five times it; and the letter h marks a mean annual temperature at or above 18 °C.
- Climate classes
- BWh (arid desert, mean annual temperature at or above 18 °C)
- Elements that discuss it
- 64
- Sources
- 23
- Editor
- Contributed by Praecise as open research
- Release
- 16 November 2026
What defines it
In the Köppen-Geiger criteria used by the 1 km maps, arid climates (B) are those where mean annual precipitation is below ten times a seasonal threshold; deserts (BW) fall below five times it; and the letter h marks a mean annual temperature at or above 18 °C. B takes precedence over every other class (Present and future Köppen-Geiger climate classification maps at 1-km resolution). The third version of the maps shows how these zones shift from 1901 to 2099 (High-resolution (1 km) Köppen-Geiger maps for 1901-2099 based on constrained CMIP6 projections). The largest dust sources are the Sahara, the Arabian Desert and, in the cold class, the Gobi (Sand and Dust Storms (WMO)).
What it changes
Heat, dryness and dust shape everything: people need cooling and water, equipment needs heat and dust protection, and solar energy is abundant but loses output to dust.
Water
Rain is scarce and irregular; drought affected at least 1.5 billion people in the decade to 2017 (Drought (UNCCD)). Options in the library include solar desalination (Solar-powered desalination system requires no extra batteries) and atmospheric water harvesting (Window-sized device taps the air for safe drinking water). On coastal deserts fog and dew can add small amounts: in the Atacama, fog and dew together yield about 0.2 litres per square metre per day where fog occurs (Understanding inland fog and dew dynamics for assessing potential non-rainfall water use in the Atacama).
Food and farming
What grows here, and how
Outdoor growing depends on irrigation, salt tolerance and shade. Date palm is the documented tree crop of hot deserts: a field trial of sensor-scheduled subsurface irrigation used 21.04 m3 of water per palm a year against 58.71 m3 for surface irrigation, a 64.1 per cent saving, and raised water productivity from 0.531 to 1.783 kg per m3 (Efficient IoT-Based Control for a Smart Subsurface Irrigation System to Enhance Irrigation Management of Date Palm). Maturity: Prototype, a field trial. Where groundwater is brackish, halophytes, plants that complete their life cycle above 200 mM sodium chloride, can supply grain, vegetables, fodder and biofuel (Protection of Halophytes and Their Uses for Cultivation of Saline-Alkali Soil in China). Water use of any crop can be estimated with the FAO method in (Crop evapotranspiration: Guidelines for computing crop water requirements (FAO Irrigation and Drainage Paper 56)). Agrivoltaics, which shades crops under solar panels, is in (Agrivoltaics: Opportunities for Agriculture and the Energy Transition. A Guideline for Germany). Seawater greenhouses, which use seawater to cool and humidify a growing space, have been built on desert coasts, but no primary source on their results could be opened in this work (gap). Insects are eaten in 128 countries, and the authors of a global atlas describe a small environmental footprint and efficient feed conversion (The global atlas of edible insects: analysis of diversity and commonality contributing to food systems and sustainability); no desert-specific trial was opened.
Energy
Sun is strong but dust cuts output. A year of paired clean and uncleaned modules in Chile found annual dust losses peaking at 39 per cent in the northern coastal desert, against 3 per cent or less at high-altitude sites (Effects of soiling on photovoltaic (PV) modules in the Atacama Desert). A review for the Middle East and North Africa states that dust losses may reach 1 per cent a day and compares cleaning with coatings (Anti-Soiling Coatings for Enhancement of PV Panel Performance in Desert Environment: A Critical Review and Market Overview). Because no one mitigation suits every site, monitoring comes first (Monitoring photovoltaic soiling: assessment, challenges, and perspectives of current and potential strategies). Batteries suffer in heat: one lithium iron phosphate range is rated to discharge up to +50 °C (12,8 and 25,6 Volt Lithium Iron Phosphate Batteries Smart: datasheet) and another to operate up to about 135 °F (about 57 °C) (Understanding Temperature Limits of LiFePO4 Batteries).
Shelter and construction
WHO advises keeping homes cool by ventilating at night and blocking sunlight in the day (Heat and health (WHO fact sheet)). Warm nights that prevent recovery are a defining feature of dangerous heatwaves (Extreme Heat (WMO)). No open source on desert building methods was opened in this work; see (WHO Housing and health guidelines) for indoor temperature guidance.
Waste, sanitation and material cycles
Dry conditions favour dry sanitation; see (Compendium of Sanitation Systems and Technologies). No desert-specific source was opened in this work.
Health and care
An estimated 489,000 heat-related deaths occur each year, and those most at risk include older people, people with chronic illness, infants, outdoor workers and the poor in housing without cooling (Heat and health (WHO fact sheet)). Heatstroke is a medical emergency (Heat and health (WHO fact sheet)). Sand raises ultraviolet levels (Ultraviolet radiation (WHO fact sheet)). Dust storms harm health and livestock (Sand and Dust Storms (WMO)).
Electronics and circuit design
Heat throttles computers: Raspberry Pi boards progressively slow their cores from 80 °C and throttle cores and GPU at 85 °C, a hard limit on all models (Raspberry Pi computers documentation). Some ESP32 modules come in a version rated to 105 °C ambient (ESP32-WROOM-32E and ESP32-WROOM-32UE Datasheet). Relevant tests are dry heat (IEC 60068-2-2), simulated solar radiation (IEC 60068-2-5) and dust and sand (IEC 60068-2-68) (IEC 60068 (Wikipedia article)). Dust-tight enclosures are IP6X (IP code (Wikipedia article), IEC 60529:1989+AMD1:1999+AMD2:2013 Degrees of protection provided by enclosures (IP Code)).
Materials and supply
Dry air corrodes metal slowly: ISO 9223 category C1 includes some deserts, with zinc loss under 0.1 µm a year (HDG Corrosion Rates for ISO Categories C1-C5/X). Coastal deserts are different, because sea salt raises the category (HDG Corrosion Rates for ISO Categories C1-C5/X). Abrasion by sand and sunlight degrade coatings; a review advises testing anti-soiling coatings at the intended site before large use (Anti-Soiling Coatings for Enhancement of PV Panel Performance in Desert Environment: A Critical Review and Market Overview).
Mobility and transport
Strong dust storms can close roads and airports (Sand and Dust Storms (WMO)).
Communications and connectivity
No source found in this work.
Safety, resilience and disaster readiness
Heat and dust storms are the main hazards. WMO runs a sand and dust storm warning system with four regional centres, part of Early Warnings for All (Sand and Dust Storms (WMO)). WHO supports heat-health action plans and warning systems (Heat and health (WHO fact sheet)).
Ecology, biodiversity and climate
Dust carries nutrients that fertilise marine and land ecosystems far away; Saharan dust in the Alps in March 2022 contributed to record glacier loss (Sand and Dust Storms (WMO)).
Delivery, operations and measurement
Measure module soiling and plan cleaning against water cost (Monitoring photovoltaic soiling: assessment, challenges, and perspectives of current and potential strategies); log enclosure and battery temperatures against rated limits.
Equipment in this environment
- Heat: confirm upper ambient ratings, for example 85 °C or 105 °C for ESP32 module versions (ESP32-WROOM-32E and ESP32-WROOM-32UE Datasheet); expect throttling of single-board computers from 80 °C core temperature (Raspberry Pi computers documentation). Dry heat test: IEC 60068-2-2 (IEC 60068 (Wikipedia article), IEC 60068-2 Environmental testing, Part 2: Tests (all parts)).
- Dust: IP6X for sealed electronics; IP5X lets some dust in without stopping safe operation (IP code (Wikipedia article)). Dust and sand test: IEC 60068-2-68 (IEC 60068 (Wikipedia article)).
- Solar radiation and UV: simulated solar radiation test IEC 60068-2-5 (IEC 60068 (Wikipedia article)).
- Batteries: keep within maker limits, discharge to +50 °C for one range (12,8 and 25,6 Volt Lithium Iron Phosphate Batteries Smart: datasheet); shade and ventilate battery housings.
- Corrosion: low inland (C1), higher on desert coasts (HDG Corrosion Rates for ISO Categories C1-C5/X).
Hazards and readiness
Extreme heat (Extreme Heat (WMO), Heat and health (WHO fact sheet)), dust and sand storms (Sand and Dust Storms (WMO)), drought (Drought (UNCCD)), and flash floods, for which no source was opened in this work.
At the frontier
- Anti-soiling coatings for solar modules. Maturity: Prototype; the review advises local testing (Anti-Soiling Coatings for Enhancement of PV Panel Performance in Desert Environment: A Critical Review and Market Overview).
- Sensor-scheduled subsurface irrigation for date palms, cutting water by about two-thirds in a field trial. Maturity: Prototype (Efficient IoT-Based Control for a Smart Subsurface Irrigation System to Enhance Irrigation Management of Date Palm).
- Solar desalination and hydrogel water harvesting, listed in the library (Solar-powered desalination system requires no extra batteries, Window-sized device taps the air for safe drinking water).
Communities living here
- Five cities along 1,300 km of the Chilean desert, from 18° S to 30° S, where dust losses on solar modules were measured (Effects of soiling on photovoltaic (PV) modules in the Atacama Desert).
No other open source opened in this work documented a named hot-desert community; this is a gap.
Gaps
- No primary source on seawater greenhouses or on desert building methods could be opened.
- No source on flash floods, desert communications or named communities beyond Chile.
Elements that discuss it
1 Place and planning
- 1.2 Climate and hazard data
- 1.8 Ground sensing networks for a place
- 1.9 Mapping ice, forest canopy, coasts and mountains
- 1.11 Receiving satellite data and community ground stations
- 1.12 Surveying the ground: GNSS, reference stations and boundaries
- 1.13 Using satellite imagery
3 Water
- 3.1 Source and yield
- 3.3 Treatment
- 3.5 Quality testing
- 3.7 Desalination for islands, coasts and saline inland sites
- 3.8 Fog, dew and water from air
- 3.9 Rainwater harvesting
- 3.10 Reuse of greywater and recycled water
- 3.11 Reverse osmosis and membrane treatment
- 3.12 Storage, distribution, hot water and water safety plans
- 3.13 Wells, boreholes and springs
4 Food and farming
- 4.1 Soil
- 4.4 Animals
- 4.11 Light, climate and energy for indoor and protected growing
- 4.16 Soilless growing: hydroponics, aeroponics and aquaponics
- 4.17 Ponds, cages and fish farmed with crops
- 4.18 Handling, processing and preserving fish
- 4.19 Recirculating systems and aquaponics
- 4.21 Shellfish and seaweed farming at sea
- 4.23 Food from water: choosing species and systems
- 4.24 Water quality and smart monitoring for fish
- 4.25 Food from water where land farming fails
- 4.26 Community-scale food processing
6 Shelter and construction
- 6.3 Envelope
- 6.9 Underground and earth-sheltered rooms: radon, damp and air
- 6.10 Building for extreme climates
- 6.11 Interiors for health and function
- 6.12 Low-carbon structural systems and off-site building
- 6.17 Concrete, masonry and earth structures
- 6.22 Timber and bamboo structures
8 Health and care
- 8.16 Essential diagnostics and point-of-care tests
- 8.19 Prevention, nutrition and lifestyle medicine
- 8.21 Medicine in remote and harsh environments
9 Manufacturing and repair
- 9.14 Designing a machine
- 9.15 Machine safety by design
- 9.16 Machines for local production and recovered materials
- 9.17 Mechanisms, motion and drives
- 9.19 Open machine libraries
- 9.20 Safe handling of nanomaterials, resins and solvents
- 9.24 Mobile, aerial and underwater robots
10 Electronics and circuit design
- 10.7 Choosing a microcontroller platform
- 10.8 Enclosures and harsh-environment hardening
- 10.10 Low-power and battery-powered devices
11 Materials and supply
- 11.8 Choosing materials for parts and machines
- 11.9 Battery and solar cell materials
- 11.10 Bio-based materials
- 11.11 Bioplastics and their end of life
- 11.12 Coatings and corrosion protection
- 11.13 Open materials data and AI discovery
- 11.14 Reading claims about new materials
- 11.15 Sorbents and membranes for water and air
- 11.16 Choosing a structural material
12 Mobility and transport
13 Digital infrastructure
14 Communications and connectivity
20 Safety, resilience and disaster readiness
22 Delivery, operations and measurement
Sources
- Present and future Köppen-Geiger climate classification maps at 1-km resolution Paper, S0
- High-resolution (1 km) Köppen-Geiger maps for 1901-2099 based on constrained CMIP6 projections Dataset, S0
- Sand and Dust Storms (WMO) Guide, S0
- Extreme Heat (WMO) Guide, S0
- Heat and health (WHO fact sheet) Guide, S2
- Ultraviolet radiation (WHO fact sheet) Guide, S0
- Effects of soiling on photovoltaic (PV) modules in the Atacama Desert Paper, S0
- Monitoring photovoltaic soiling: assessment, challenges, and perspectives of current and potential strategies Paper, S0
- Anti-Soiling Coatings for Enhancement of PV Panel Performance in Desert Environment: A Critical Review and Market Overview Paper, S0
- Efficient IoT-Based Control for a Smart Subsurface Irrigation System to Enhance Irrigation Management of Date Palm Paper, S0
- Protection of Halophytes and Their Uses for Cultivation of Saline-Alkali Soil in China Paper, S0
- Drought (UNCCD) Guide, S0
- HDG Corrosion Rates for ISO Categories C1-C5/X Guide, S0
- IEC 60068-2 Environmental testing, Part 2: Tests (all parts) Standard, S0
- IEC 60068 (Wikipedia article) Guide, S0
- IEC 60529:1989+AMD1:1999+AMD2:2013 Degrees of protection provided by enclosures (IP Code) Standard, S2
- IP code (Wikipedia article) Guide, S0
- Raspberry Pi computers documentation Guide, S0
- ESP32-WROOM-32E and ESP32-WROOM-32UE Datasheet Guide, S0
- 12,8 and 25,6 Volt Lithium Iron Phosphate Batteries Smart: datasheet Guide, S2
- Understanding Temperature Limits of LiFePO4 Batteries Guide, S2
- The global atlas of edible insects: analysis of diversity and commonality contributing to food systems and sustainability Paper, S0
- Understanding inland fog and dew dynamics for assessing potential non-rainfall water use in the Atacama Paper, S0
External resource. Not made or verified by Public Protocol, where the entry is external.