Environment
High humidity
Air that stays close to saturation for long periods, so surfaces stay wet and condensation is common.
- Climate classes
- Cuts across classes; persistent in Af and Am, also in coastal and enclosed settings
- Elements that discuss it
- 54
- Sources
- 10
- Editor
- Contributed by Praecise as open research
- Release
- 16 November 2026
What defines it
Air that stays close to saturation for long periods, so surfaces stay wet and condensation is common. It is the norm in tropical rainforest and monsoon climates (Present and future Köppen-Geiger climate classification maps at 1-km resolution), on coasts, and inside poorly ventilated buildings, basements and enclosures anywhere.
What it changes
Shelter and construction
Persistent dampness and mould inside buildings are linked with respiratory symptoms, allergies and asthma and can disturb the immune system; WHO's main recommendation is to prevent persistent dampness and microbial growth in building structures (WHO guidelines for indoor air quality: dampness and mould).
Health and care
Damp housing affects breathing (WHO guidelines for indoor air quality: dampness and mould). Humid heat feels hotter: WMO notes that daily highs of 31 to 33 °C are normal in Kuala Lumpur, so warnings use local thresholds (Extreme Heat (WMO)). Mosquito-borne disease such as malaria is concentrated in warm humid regions (Malaria (WHO fact sheet)). No source opened in this work gave a combined heat and humidity index; this is a gap.
Food and farming
What grows here, and how
Humid warmth suits year-round growth (see the tropical rainforest profile) but speeds spoilage after harvest; hermetic storage is in (Purdue Improved Crop Storage (PICS)) and post-harvest handling in (Small-Scale Postharvest Handling Practices: A Manual for Horticultural Crops (4th edition)).
Electronics and circuit design
Moisture causes corrosion, leakage and mould on boards. Tests: damp heat, cyclic, IEC 60068-2-30 (Test Db, 12 h plus 12 h cycle); damp heat, steady state, 60068-2-78 (Test Cab); composite temperature and humidity cycling, 60068-2-38; mould growth, 60068-2-10 (IEC 60068 (Wikipedia article), IEC 60068-2 Environmental testing, Part 2: Tests (all parts)). Moisture-sensitive parts must be handled to their level: one ESP32 module is level 3, stored sealed below 40 °C and 90 per cent relative humidity, soldered within 168 hours at 25 °C and 60 per cent once opened, or baked (ESP32-WROOM-32E and ESP32-WROOM-32UE Datasheet). Sealed IP-rated enclosures keep rain out but can trap condensation; no source opened here covered breather vents (gap) (IP code (Wikipedia article), IEC 60529:1989+AMD1:1999+AMD2:2013 Degrees of protection provided by enclosures (IP Code)).
Materials and supply
Long wet periods raise corrosivity to C5 in tropical areas with heavy pollution or chlorides (HDG Corrosion Rates for ISO Categories C1-C5/X).
Equipment in this environment
- Damp heat tests IEC 60068-2-30 or 60068-2-78; mould growth 60068-2-10 (IEC 60068 (Wikipedia article)).
- Moisture sensitivity levels and storage limits for components (ESP32-WROOM-32E and ESP32-WROOM-32UE Datasheet).
- Corrosivity up to C5 (HDG Corrosion Rates for ISO Categories C1-C5/X).
Hazards and readiness
Mould and damp housing (WHO guidelines for indoor air quality: dampness and mould), humid heat (Extreme Heat (WMO)), vector-borne disease (Malaria (WHO fact sheet)).
At the frontier
No frontier advance specific to humidity was found in the sources opened in this work.
Communities living here
See the tropical rainforest and humid tropics profile for documented communities.
Gaps
- No source on combined heat-humidity indices, breather vents for enclosures, or measured mould prevention in buildings was opened.
Elements that discuss it
1 Place and planning
- 1.2 Climate and hazard data
- 1.6 Community and participatory mapping
- 1.8 Ground sensing networks for a place
- 1.9 Mapping ice, forest canopy, coasts and mountains
- 1.11 Receiving satellite data and community ground stations
- 1.12 Surveying the ground: GNSS, reference stations and boundaries
- 1.13 Using satellite imagery
3 Water
- 3.1 Source and yield
- 3.3 Treatment
- 3.5 Quality testing
- 3.7 Desalination for islands, coasts and saline inland sites
- 3.8 Fog, dew and water from air
- 3.9 Rainwater harvesting
- 3.10 Reuse of greywater and recycled water
- 3.11 Reverse osmosis and membrane treatment
- 3.12 Storage, distribution, hot water and water safety plans
- 3.13 Wells, boreholes and springs
4 Food and farming
- 4.1 Soil
- 4.13 Pests, weeds and plant diseases
- 4.17 Ponds, cages and fish farmed with crops
- 4.18 Handling, processing and preserving fish
- 4.23 Food from water: choosing species and systems
- 4.24 Water quality and smart monitoring for fish
- 4.26 Community-scale food processing
6 Shelter and construction
- 6.3 Envelope
- 6.9 Underground and earth-sheltered rooms: radon, damp and air
- 6.10 Building for extreme climates
- 6.11 Interiors for health and function
- 6.12 Low-carbon structural systems and off-site building
- 6.22 Timber and bamboo structures
8 Health and care
9 Manufacturing and repair
- 9.14 Designing a machine
- 9.15 Machine safety by design
- 9.16 Machines for local production and recovered materials
- 9.17 Mechanisms, motion and drives
- 9.19 Open machine libraries
- 9.20 Safe handling of nanomaterials, resins and solvents
10 Electronics and circuit design
- 10.7 Choosing a microcontroller platform
- 10.8 Enclosures and harsh-environment hardening
- 10.10 Low-power and battery-powered devices
11 Materials and supply
- 11.8 Choosing materials for parts and machines
- 11.9 Battery and solar cell materials
- 11.10 Bio-based materials
- 11.11 Bioplastics and their end of life
- 11.12 Coatings and corrosion protection
- 11.13 Open materials data and AI discovery
- 11.14 Reading claims about new materials
- 11.15 Sorbents and membranes for water and air
- 11.16 Choosing a structural material
20 Safety, resilience and disaster readiness
22 Delivery, operations and measurement
Sources
- Present and future Köppen-Geiger climate classification maps at 1-km resolution Paper, S0
- WHO guidelines for indoor air quality: dampness and mould Guide, S0
- IEC 60068 (Wikipedia article) Guide, S0
- IEC 60068-2 Environmental testing, Part 2: Tests (all parts) Standard, S0
- ESP32-WROOM-32E and ESP32-WROOM-32UE Datasheet Guide, S0
- HDG Corrosion Rates for ISO Categories C1-C5/X Guide, S0
- IEC 60529:1989+AMD1:1999+AMD2:2013 Degrees of protection provided by enclosures (IP Code) Standard, S2
- IP code (Wikipedia article) Guide, S0
- Malaria (WHO fact sheet) Guide, S0
- Extreme Heat (WMO) Guide, S0
External resource. Not made or verified by Public Protocol, where the entry is external.