Element 11.16
Choosing a structural material
- Sheet
- 11.16
- Chapter
- 11 Materials and supply
- State
- Drafted
- Release
- 16 November 2026
- Editor
- Contributed by Praecise as open research
- Reviewers
- To be named at review
- Safety
- S3, as the chapter
- Licence
- CC BY-SA 4.0
- Resources
- 13
The element
- Requirement
Each structure is made of a material whose strength, durability and failure behaviour are known for the loads and climate of the site, chosen with a qualified engineer and under the code in force, with the material's own product and test standard named.
- How to tell
- The loads of the site are named before the material is chosen. In Europe, EN 1991 lists the actions to consider: self-weight and imposed loads, fire, snow, wind, thermal actions, actions during execution, accidental actions and others (EN 1991 Eurocode 1: Actions on structures). Seismic actions follow EN 1998 (EN 1998 Eurocode 8: Design of structures for earthquake resistance). Where ice forms, ISO 12494 states that it is extremely important to design for some ice rather than none, because ice increases both exposed area and drag (ISO 12494:2017 Atmospheric icing of structures).
- Seismic hazard is read from an official map; where none exists, the GEM Global Seismic Hazard Map gives peak ground acceleration with a 10% probability of exceedance in 50 years worldwide (GEM Global Seismic Hazard Map).
- The material has a design code and a product standard. The ten Eurocodes cover concrete, steel, composite, timber, masonry and aluminium (About the EN Eurocodes); bamboo has ISO 22156 (ISO 22156:2021 Bamboo structures - Bamboo culms - Structural design); earth has, among others, the New Zealand standards NZS 4297 to 4299 (NZS 4297, 4298 and 4299:2024 Earth building standards).
- Durability is matched to exposure: steel by the corrosivity category of the place (Categorising corrosivity by type of environment); wood by its durability against fungi, beetles, termites and marine organisms (EN 350:2016 Durability of wood and wood-based products - Testing and classification of the durability to biological agents).
- An engineer signs the choice. This page gives no load values and no design procedure.
- Options
Timber and engineered timber. Light, renewable, needs to be kept dry and designed for fire (Wood handbook: Wood as an engineering material (FPL-GTR-282)). See the element on timber and bamboo structures. Bamboo. Round-culm bamboo for low buildings under ISO 22156 (ISO 22156:2021 Bamboo structures - Bamboo culms - Structural design). Steel and aluminium. Wide spans, towers and frames; needs corrosion protection (Categorising corrosivity by type of environment). Concrete, masonry and earth. Mass and compression; earth needs a dry plinth and roof (NZS 4297, 4298 and 4299:2024 Earth building standards). Fibre-reinforced polymers. Light and corrosion-resistant; a European design specification is new (see the steel and aluminium element). Reclaimed material. Lowest new carbon; needs assessment (see the reclaimed materials element).
- Settled, open, contested
Settled: loads come first and are set by the code of the place; durability depends on exposure (EN 1991 Eurocode 1: Actions on structures, Categorising corrosivity by type of environment). Open: the Eurocodes are changing. The second generation was made available to national bodies up to 2026, with 2028 the latest date for withdrawing the first (Timeline for the Eurocodes second generation). Check which edition applies. Contested: local natural materials against code-listed industrial ones. The second have known properties; the first cost less in carbon and money and need testing or a special route through the code.
The four stages
- Learn: the loads (EN 1991 Eurocode 1: Actions on structures), the hazards (GEM Global Seismic Hazard Map), the materials (Wood handbook: Wood as an engineering material (FPL-GTR-282)).
- Design: the engineer selects to the code (About the EN Eurocodes); carbon is compared (ICE Database (Inventory of Carbon and Energy), ÖKOBAUDAT).
- Build: product standards and test certificates for each delivery (EN 350:2016 Durability of wood and wood-based products - Testing and classification of the durability to biological agents).
- Deploy: inspection by exposure class (Categorising corrosivity by type of environment).
Resources at each stage
1 Learn
Understand
- About the EN Eurocodes Standard, S3
- EN 1991 Eurocode 1: Actions on structures Standard, S3
- EN 1998 Eurocode 8: Design of structures for earthquake resistance Standard, S3
- Timeline for the Eurocodes second generation Reference design, S0
- GEM Global Seismic Hazard Map Dataset, S2
- Categorising corrosivity by type of environment Guide, S0
- NZS 4297, 4298 and 4299:2024 Earth building standards Standard, S3
- Wood handbook: Wood as an engineering material (FPL-GTR-282) Guide, S2
2 Design
Size and choose
- EN 350:2016 Durability of wood and wood-based products - Testing and classification of the durability to biological agents Standard, S1
- About the EN Eurocodes Standard, S3
- EN 1991 Eurocode 1: Actions on structures Standard, S3
- EN 1998 Eurocode 8: Design of structures for earthquake resistance Standard, S3
- GEM Global Seismic Hazard Map Dataset, S2
- ICE Database (Inventory of Carbon and Energy) Dataset, S0
- Categorising corrosivity by type of environment Guide, S0
- ISO 12494:2017 Atmospheric icing of structures Standard, S3
- ISO 22156:2021 Bamboo structures - Bamboo culms - Structural design Standard, S3
- NZS 4297, 4298 and 4299:2024 Earth building standards Standard, S3
- ÖKOBAUDAT Dataset, S0
- Wood handbook: Wood as an engineering material (FPL-GTR-282) Guide, S2
What changes between 30 adults and 300 people
At 30 adults, buildings and fixtures are small and the simplest code class often applies; one material used well, with a known supplier, limits the skills needed. At 300 people, longer spans, assembly buildings, towers and bridges bring several materials, more load cases and formal checking, and a materials register becomes necessary.
Reference designs
-
Reference design
Timeline for the Eurocodes second generation
European Commission page giving the milestones of the second generation of the Eurocodes: first standards made available to national bodies in 2020, the last in 2026, and 2028 as the latest date of withdrawal of the first-generation standards.
External resource. Not made or verified by Public ProtocolMaturity: WorkingSafety S0Open or commercial: not stated by the makerListed 16 November 2026
Parts list
Every resource that supports this element. Those marked External carry the label “External resource. Not made or verified by Public Protocol”.
| Resource | Type | Origin | Maturity | Safety | Licence, as stated at its source |
|---|---|---|---|---|---|
| EN 350:2016 Durability of wood and wood-based products - Testing and classification of the durability to biological agents | Standard | External | Established | S1 | Not stated on the page opened |
| About the EN Eurocodes | Standard | External | Established | S3 | Not stated on the page opened |
| EN 1991 Eurocode 1: Actions on structures | Standard | External | Established | S3 | Not stated on the page opened |
| EN 1998 Eurocode 8: Design of structures for earthquake resistance | Standard | External | Established | S3 | Not stated on the page opened |
| Timeline for the Eurocodes second generation | Reference design | External | Working | S0 | Not stated on the page opened |
| GEM Global Seismic Hazard Map | Dataset | External | Established | S2 | CC BY-NC-SA 4.0 for downloads and viewer; CC BY-SA 4.0 for the PDF poster and PNG |
| ICE Database (Inventory of Carbon and Energy) | Dataset | External | Established | S0 | Educational use only; must not be used for commercial applications |
| Categorising corrosivity by type of environment | Guide | External | Established | S0 | Not stated on the page opened |
| ISO 12494:2017 Atmospheric icing of structures | Standard | External | Established | S3 | Not stated on the page opened |
| ISO 22156:2021 Bamboo structures - Bamboo culms - Structural design | Standard | External | Established | S3 | Not stated on the page opened |
| NZS 4297, 4298 and 4299:2024 Earth building standards | Standard | External | Established | S3 | Not stated on the page opened |
| ÖKOBAUDAT | Dataset | External | Established | S0 | Publicly available at no charge; licence terms in its data policy, not on the page opened |
| Wood handbook: Wood as an engineering material (FPL-GTR-282) | Guide | External | Established | S2 | Not stated on the page opened |
Depends on, and completes
It is one of 19 elements that complete Materials and supply.
The standing questions
Who pays for the engineer and the tests. Who keeps the record of what was used. Who decides when a cheaper material is good enough.
Environments
steel in very high corrosivity, C5 such as a coastal refinery, and CX offshore (Categorising corrosivity by type of environment); marine organisms attack wood in service (EN 350:2016 Durability of wood and wood-based products - Testing and classification of the durability to biological agents).
ice load and wind on iced structures (ISO 12494:2017 Atmospheric icing of structures); snow is a separate action (EN 1991 Eurocode 1: Actions on structures).
traditional earth building is predominantly used in desert climates or areas of low seismicity (NZS 4297, 4298 and 4299:2024 Earth building standards).
termites and decay fungi govern wood durability (EN 350:2016 Durability of wood and wood-based products - Testing and classification of the durability to biological agents).
no source found beyond the general timber references.
no source found for material choice specific to flooding.
EN 1998 applies (EN 1998 Eurocode 8: Design of structures for earthquake resistance).
Environment profiles for these settings: Small islands and coasts; Arctic, subarctic and permafrost, including sea ice; Extreme cold; Mountains and high altitude; Hot deserts; Extreme heat; Tropical rainforest and humid tropics; High humidity; Temperate and boreal forests; River deltas and flood plains; Seismic zones. All environments
Safety
State and evidence
Drafted
An editor has written the element's text from the resources listed under it, citing them. It is checked when it is reviewed.
Evidence from a real place or system is recorded here, with what did not work. What the states mean
History
- Drafted in the release of 16 November 2026.