Public Protocol
Platform

Element 3.8

Fog, dew and water from air

Sheet
3.8
Chapter
3 Water
State
Drafted
Release
16 November 2026
Editor
Contributed by Praecise as open research
Reviewers
To be named at review
Safety
S3, as the chapter
Licence
CC BY-SA 4.0
Resources
3

The element

Requirement

Water taken from fog or air is planned only after at least a year of measurement at the exact site, its quality is tested against the WHO Guidelines before drinking, and the group has the skills and budget to maintain the collectors after any outside project ends. Drinking water is at safety level S3.

How to tell
Options
  • Large fog collectors: typically 4 m high and 10 m wide, mesh on cables between posts (Fog as a Fresh-Water Resource: Overview and Perspectives).
  • Documented yields, in litres per square metre per day: Alto Patache, Chile, about 6 over 14 years; Tojquia, Guatemala, 4.5 from 1,400 square metres (6,300 litres a day in the dry season); mountain Ecuador up to 12; South Africa 1 to 5, above 10 over 1,700 m; Oman 30 at 900 to 1,000 m in the monsoon, but for about two months a year; Tenerife 10; Madeira about 8; Cape Verde 3 to 75; Namibia annual averages as low as 1 (Fog as a Fresh-Water Resource: Overview and Perspectives).
  • Passive sorbent panels: a hydrogel panel gave 57 to 161.5 millilitres a day in Death Valley over one week; a laboratory proof of concept, not a supply (Window-sized device taps the air for safe drinking water).
  • Powered atmospheric water generators: no open, primary source on energy per litre was opened in this work, so no figure is given here.
  • Dew: no source with documented community yields was opened in this work.
Settled, open, contested

Settled: measure first; maintenance decides survival. The review records failures after handover in Chile, Ecuador, South Africa (one of seven systems partly operating), Eritrea and Yemen (Fog as a Fresh-Water Resource: Overview and Perspectives). Open: whether sorbent harvesters will scale beyond laboratory panels (Window-sized device taps the air for safe drinking water). Contested: whether outside-funded fog projects should be started where the community has not asked for them; the failures above are the case against.

The four stages

Learn: how fog forms and where collection works (Fog as a Fresh-Water Resource: Overview and Perspectives). Design: a year of standard-collector data, then size the array from the measured dry-season yield. Build: large collectors from documented designs, braced for wind (Fog as a Fresh-Water Resource: Overview and Perspectives). Deploy: maintain mesh and cables, test water, budget for upkeep; the review estimates operating costs of US$1,000 to 2,500 a year and about US$1 per cubic metre in Chile, as stated in 2012 (Fog as a Fresh-Water Resource: Overview and Perspectives).

Resources at each stage

What changes between 30 adults and 300 people

At 5 litres per square metre per day, 600 litres a day for 30 adults needs about 120 square metres of mesh, three large collectors. For 300 people, 6,000 litres needs about 1,200 square metres, close to the Guatemala array (Fog as a Fresh-Water Resource: Overview and Perspectives). Fog is a seasonal supplement in most places, not the whole supply.

Reference designs

Open for contributions Designs with drawings, specifications and a bill of materials. Add to it

Parts list

Every resource that supports this element. Those marked External carry the label “External resource. Not made or verified by Public Protocol”.

ResourceTypeOriginMaturitySafetyLicence, as stated at its source
Fog as a Fresh-Water Resource: Overview and PerspectivesPaperExternalReplicatedS0Not stated on the page opened
Window-sized device taps the air for safe drinking waterPaperExternalPrototypeS0Not stated on the page opened
Guidelines for drinking-water qualityStandardExternalEstablishedS3CC BY-NC-SA 3.0 IGO

Depends on, and completes

Depends on 3.1.

It is one of 13 elements that complete Water.

The standing questions

Who can afford this: the mesh is cheap; upkeep is the recurring cost. Who does the work: a local keeper repairs mesh after storms. Who decides: the community, before any outside project begins.

Environments

Environment profiles for these settings: Small islands and coasts; Arctic, subarctic and permafrost, including sea ice; Extreme cold; Hot deserts; Extreme heat; Tropical rainforest and humid tropics; High humidity; Temperate and boreal forests; Mountains and high altitude; River deltas and flood plains; High wind. All environments

Safety

State and evidence

Drafted

An editor has written the element's text from the resources listed under it, citing them. It is checked when it is reviewed.

Evidence from a real place or system is recorded here, with what did not work. What the states mean

History