Element 3.9
Rainwater harvesting
- Sheet
- 3.9
- Chapter
- 3 Water
- State
- Drafted
- Release
- 16 November 2026
- Editor
- Contributed by Praecise as open research
- Reviewers
- To be named at review
- Safety
- S3, as the chapter
- Licence
- CC BY-SA 4.0
- Resources
- 9
The element
- Requirement
Roofs and tanks are sized from the local monthly rainfall record against monthly demand, built from materials that do not contaminate the water, and fitted with screens and a first-flush diverter; water for drinking is treated before use. Drinking water is at safety level S3: this text states the requirement and points to the authoritative sources; it is not a procedure.
- How to tell
- Yield: in theory 0.62 US gallons per square foot of roof per inch of rain, which is 1 litre per square metre per millimetre; installers assume 75 to 85 per cent is captured (Rainwater Harvesting FAQ).
- Sizing: a monthly water balance, kept like a chequebook, adds each month's collected water to storage and subtracts that month's demand (The Texas Manual on Rainwater Harvesting (third edition)). The manual shows why medians matter: Dallas averages about 35.0 inches of rain a year, but the sum of monthly medians is only 29.3 inches (The Texas Manual on Rainwater Harvesting (third edition)).
- First flush: one rule of thumb is to divert at least 10 US gallons per 1,000 square feet of roof, about 0.4 litres per square metre, and the manual also gives 1 to 2 gallons per 100 square feet; more is needed after long dry spells, near trees and in dusty seasons (The Texas Manual on Rainwater Harvesting (third edition)).
- Roof: for drinking water the manual recommends plain galvanised metal or metal painted with epoxy or latex, and advises against composite or asphalt shingles, which can leach toxic components; clay and concrete tiles are usable but lose up to about 10 per cent (The Texas Manual on Rainwater Harvesting (third edition)). Grass and palm-leaf roofs are generally unsuitable (SSWM Toolbox).
- Options
- Household tanks and cement jars, such as the 2,000-litre Thai jar, with field studies from Thailand, Kenya, Viet Nam, Uganda and Tanzania (Rainwater Harvesting (RWSN self-supply topic)).
- Shared cisterns fed by large roofs of halls, barns or workshops (The Texas Manual on Rainwater Harvesting (third edition)).
- Rainwater as a non-drinking supply for washing, gardens and animals, with drinking water from another source.
- Rainwater as the drinking supply, treated at the point of use with a WHO-rated product (WHO International Scheme to Evaluate Household Water Treatment Technologies, WHO international scheme to evaluate household water treatment technologies: results of Rounds III and IV) or chlorinated in storage (Measuring chlorine levels in water supplies (WHO Technical Note 11)).
- Rainwater as a low-arsenic alternative where groundwater is high in arsenic, an option WHO names (Arsenic (WHO fact sheet)).
- Settled, open, contested
Settled: size by the monthly record, not the annual total; divert the first flush; screen and cover tanks (The Texas Manual on Rainwater Harvesting (third edition)). Open: how much first flush is enough; the manual says opinions vary (The Texas Manual on Rainwater Harvesting (third edition)). Contested: rainwater as primary drinking water. The Texas Water Development Board says there are no federal or state quality standards for it there and that it is generally safe after treatment (Rainwater Harvesting FAQ); others prefer a protected groundwater source as the default.
The four stages
Learn: catchment, conveyance, first flush, storage and treatment (The Texas Manual on Rainwater Harvesting (third edition), Rainwater Harvesting (RWSN self-supply topic)). Design: the monthly balance from local rainfall records (The Texas Manual on Rainwater Harvesting (third edition)). Build: roof, gutters, diverter and tanks from proven designs (Rainwater Harvesting (RWSN self-supply topic), SSWM Toolbox). Deploy: clean gutters and diverters, test stored water, keep the balance sheet against real use (Measuring chlorine levels in water supplies (WHO Technical Note 11)).
Resources at each stage
1 Learn
Understand
- Rainwater Harvesting (RWSN self-supply topic) Guide, S0
- SSWM Toolbox Guide, S2
- Rainwater Harvesting FAQ Guide, S0
- The Texas Manual on Rainwater Harvesting (third edition) Guide, S3
- Arsenic (WHO fact sheet) Guide, S3
- WHO international scheme to evaluate household water treatment technologies: results of Rounds III and IV Dataset, S3
- Measuring chlorine levels in water supplies (WHO Technical Note 11) Guide, S3
- How much water is needed in emergencies (WHO Technical Note 9) Guide, S3
2 Design
Size and choose
- SSWM Toolbox Guide, S2
- Rainwater Harvesting FAQ Guide, S0
- The Texas Manual on Rainwater Harvesting (third edition) Guide, S3
- Arsenic (WHO fact sheet) Guide, S3
- WHO international scheme to evaluate household water treatment technologies: results of Rounds III and IV Dataset, S3
- WHO International Scheme to Evaluate Household Water Treatment Technologies Standard, S3
- How much water is needed in emergencies (WHO Technical Note 9) Guide, S3
3 Build
Build or obtain
4 Deploy
Install, run and measure
What changes between 30 adults and 300 people
At 20 litres per person per day (How much water is needed in emergencies (WHO Technical Note 9)) and about 80 per cent capture (Rainwater Harvesting FAQ), 600 litres a day for 30 adults is 219 cubic metres a year, so roughly 274 cubic metres of rain must fall on the roof: for example 1,000 mm a year on about 270 square metres, before storage losses. For 300 people the same arithmetic needs about 2,700 square metres of roof at that rainfall: often more roof than a settlement has, so rain becomes one source of several.
Reference designs
Open for contributions Designs with drawings, specifications and a bill of materials. Add to it
Parts list
Every resource that supports this element. Those marked External carry the label “External resource. Not made or verified by Public Protocol”.
| Resource | Type | Origin | Maturity | Safety | Licence, as stated at its source |
|---|---|---|---|---|---|
| Rainwater Harvesting (RWSN self-supply topic) | Guide | External | Established | S0 | Not stated on the page opened |
| SSWM Toolbox | Guide | External | Not assessed | S2 | Not stated on the page opened; a page on using SSWM content is linked |
| Rainwater Harvesting FAQ | Guide | External | Established | S0 | Not stated on the page opened |
| The Texas Manual on Rainwater Harvesting (third edition) | Guide | External | Established | S3 | Not stated on the page opened |
| Arsenic (WHO fact sheet) | Guide | External | Established | S3 | Not stated on the page opened |
| WHO international scheme to evaluate household water treatment technologies: results of Rounds III and IV | Dataset | External | Established | S3 | CC BY-NC-SA 3.0 IGO |
| WHO International Scheme to Evaluate Household Water Treatment Technologies | Standard | External | Established | S3 | Not stated on the page opened |
| Measuring chlorine levels in water supplies (WHO Technical Note 11) | Guide | External | Established | S3 | © World Health Organization 2013. All rights reserved |
| How much water is needed in emergencies (WHO Technical Note 9) | Guide | External | Established | S3 | © World Health Organization 2013. All rights reserved |
The standing questions
Who can afford this: each roof and tank is a modest cost, spread across households. Who does the work: gutter and diverter cleaning is a rota task. Who decides: the group decides whether rain is drinking water or service water.
Environments
no source found in this work beyond general guidance.
no source found.
storage must bridge long dry spells; the monthly balance shows the size (The Texas Manual on Rainwater Harvesting (third edition)).
household jars and tanks are documented in Thailand, Uganda, Kenya, Viet Nam and Tanzania (Rainwater Harvesting (RWSN self-supply topic)).
tree overhang raises the debris load and the first flush needed (The Texas Manual on Rainwater Harvesting (third edition)).
no source found.
no source found.
Environment profiles for these settings: Small islands and coasts; Arctic, subarctic and permafrost, including sea ice; Extreme cold; Hot deserts; Extreme heat; Tropical rainforest and humid tropics; High humidity; Temperate and boreal forests; Mountains and high altitude; River deltas and flood plains. All environments
Safety
State and evidence
Drafted
An editor has written the element's text from the resources listed under it, citing them. It is checked when it is reviewed.
Evidence from a real place or system is recorded here, with what did not work. What the states mean
History
- Drafted in the release of 16 November 2026.