Element 9.20
Safe handling of nanomaterials, resins and solvents
- Sheet
- 9.20
- Chapter
- 9 Manufacturing and repair
- State
- Drafted
- Release
- 16 November 2026
- Editor
- Contributed by Praecise as open research
- Reviewers
- To be named at review
- Safety
- S2, as the chapter
- Licence
- CC BY-SA 4.0
- Resources
- 7
The element
- Requirement
Before any nanomaterial powder, resin, hardener, adhesive or solvent is used in the workshop, its hazards are assessed from its safety data sheet, exposure is controlled to the recognised standard, and waste goes to a proper route.
- How to tell
- A written assessment exists for each hazardous substance in use, made from its safety data sheet, which informs the assessment and does not replace it (Chemical safety data sheets).
- Control is adequate in the terms of the UK regulator: control measures work, exposures are below the workplace exposure limit where one exists, and exposure to substances that cause cancer, asthma or genetic damage is as low as possible (COSHH: what you need to do).
- For manufactured nanomaterials, the UK guidance applies a precautionary approach where the hazard is unclear, controls at source with a ducted fume cupboard or enclosed extraction, and for carbon nanotubes recommends respiratory protection with an assigned protection factor of 40 or more (Using nanomaterials at work (HSG272)).
- Safety cards are at hand in the workers' language (International Chemical Safety Cards (ICSC)).
- Products are screened against the SIN List before purchase (SIN List).
- Leftovers are kept in original labelled containers, not mixed, not poured into drains, and taken to collection (Household Hazardous Waste (HHW)).
- Options
- Substitute first: a less hazardous product for the same job (SIN List). For wood panels and adhesives, formaldehyde-free and bio-based adhesives are available; IARC classed formaldehyde as a Group 1 carcinogen in 2004 and WHO set an indoor guideline of 0.1 mg/m3 for 30-minute periods (Recent Advances in Bio-Based Adhesives and Formaldehyde-Free Technologies for Wood-Based Panel Manufacturing).
- Engineering control at source, as the guidance sets out (Using nanomaterials at work (HSG272)).
- Respiratory protection as a secondary control, chosen and fitted to the guidance (Using nanomaterials at work (HSG272)).
- Settled, open, contested
Settled: assessment from the data sheet, control at source and correct disposal are standard practice (COSHH: what you need to do, Chemical safety data sheets). Open: the UK guidance states that data are insufficient to confirm long-term effects of some nanomaterials, which is why it takes a precautionary approach (Using nanomaterials at work (HSG272)). Contested: no disagreement found in the sources opened.
The four stages
- Learn: the guidance and the safety cards (Using nanomaterials at work (HSG272), COSHH: what you need to do, International Chemical Safety Cards (ICSC)).
- Design: list substances; assess each; plan controls and storage (Chemical safety data sheets).
- Build: install extraction to the guidance; set up a separate, labelled store (Using nanomaterials at work (HSG272)).
- Deploy: review assessments when products change; route waste correctly (Household Hazardous Waste (HHW)).
Resources at each stage
1 Learn
Understand
3 Build
Build or obtain
- COSHH: what you need to do Guide, S2
- Using nanomaterials at work (HSG272) Guide, S2
4 Deploy
Install, run and measure
- Household Hazardous Waste (HHW) Guide, S3
- Chemical safety data sheets Guide, S1
- International Chemical Safety Cards (ICSC) Dataset, S1
What changes between 30 adults and 300 people
At 30 adults, the safest route is to avoid loose nanomaterial powders entirely, keep a short list of resins and solvents with their data sheets, and store them apart. At 300 people, a workshop with regular resin or solvent use needs a named person responsible for assessments, extraction maintained and checked, training records, and qualified advice for anything the guidance flags as high hazard.
Reference designs
Open for contributions Designs with drawings, specifications and a bill of materials. Add to it
Parts list
Every resource that supports this element. Those marked External carry the label “External resource. Not made or verified by Public Protocol”.
| Resource | Type | Origin | Maturity | Safety | Licence, as stated at its source |
|---|---|---|---|---|---|
| Recent Advances in Bio-Based Adhesives and Formaldehyde-Free Technologies for Wood-Based Panel Manufacturing | Paper | External | Working | S1 | CC BY 4.0 |
| SIN List | Dataset | External | Established | S1 | Not stated on the page opened |
| Household Hazardous Waste (HHW) | Guide | External | Established | S3 | Not stated on the page opened |
| COSHH: what you need to do | Guide | External | Established | S2 | Not stated on the page opened |
| Using nanomaterials at work (HSG272) | Guide | External | Established | S2 | Not stated on the page opened |
| Chemical safety data sheets | Guide | External | Established | S1 | Not stated on the page opened |
| International Chemical Safety Cards (ICSC) | Dataset | External | Established | S1 | Not stated on the page opened |
Depends on, and completes
It is one of 34 elements that complete Manufacturing and repair.
The standing questions
Who assesses. Who pays for extraction and protective equipment. Who decides that a substance is too hazardous to keep.
Environments
no source found.
no source found.
no source found.
no source found.
no source found.
no source found.
no source found.
Other harsh settings
no source found.
Environment profiles for these settings: Small islands and coasts; Arctic, subarctic and permafrost, including sea ice; Extreme cold; Hot deserts; Extreme heat; Tropical rainforest and humid tropics; High humidity; Temperate and boreal forests; Mountains and high altitude; River deltas and flood plains. All environments
Safety
State and evidence
Drafted
An editor has written the element's text from the resources listed under it, citing them. It is checked when it is reviewed.
Evidence from a real place or system is recorded here, with what did not work. What the states mean
History
- Drafted in the release of 16 November 2026.