Public Protocol
Platform

Element 10.7

Choosing a microcontroller platform

Sheet
10.7
Chapter
10 Electronics and circuit design
State
Drafted
Release
16 November 2026
Editor
Contributed by Praecise as open research
Reviewers
To be named at review
Safety
S1, as the chapter
Licence
CC BY-SA 4.0
Resources
17

The element

Requirement

Each device the community builds sits on a microcontroller family chosen for its task, radio, power and expected life, with an open toolchain the community can run, and documentation it can keep.

How to tell
  • The choice is written down against four questions: what the device senses or controls, which radio it needs, how it is powered, and how long it must run.
  • The chip's own documentation states the figures the design depends on: memory, radio, supply range and ambient temperature. For example, the ESP32-C6 datasheet gives -40 to 105 degrees Celsius for every variant (ESP32-C6 Series Datasheet, version 1.6); the nRF54L15 page gives -40 to 105 degrees Celsius and a 1.7 to 3.6 V supply (nRF54L15).
  • The firmware builds with an open toolchain on a clean machine (10.4). ESP-IDF is under Apache-2.0 (ESP-IDF); Zephyr under Apache 2.0 (Zephyr Project).
  • Schematics and datasheets are held locally. Raspberry Pi publishes its microcontroller documentation under CC BY-SA 4.0 (Raspberry Pi microcontroller silicon documentation); Arduino publishes schematics and enclosure files for the Nicla Sense ME (Arduino Nicla Sense ME).
Options
  • Wi-Fi with Thread and Bluetooth LE: the ESP32-C6 has a RISC-V core up to 160 MHz, a RISC-V low-power core, 2.4 GHz Wi-Fi 6, Bluetooth LE and IEEE 802.15.4 (ESP32-C6). The ESP32-C5 adds 5 GHz Wi-Fi 6 at up to 240 MHz (ESP32-C5).
  • General control, teaching and odd interfaces: the RP2040 has two Cortex-M0+ cores up to 133 MHz and 264 kB SRAM (Raspberry Pi microcontroller silicon documentation). The RP2350 offers two Cortex-M33 or two Hazard3 RISC-V cores at 150 MHz, 520 KB SRAM and twelve programmable I/O state machines (RP2350).
  • Low-power Bluetooth LE, Thread and Matter: the nRF54L15, a 128 MHz Cortex-M33 with a RISC-V coprocessor (nRF54L15).
  • Cellular and satellite: the nRF9151 combines an LTE-M, NB-IoT, NB-NTN and DECT NR+ modem with GNSS (nRF9151).
  • Sensing out of the box: the Arduino Nicla Sense ME carries motion, pressure, magnetic and gas sensors and Bluetooth LE (Arduino Nicla Sense ME).
  • Heavier work, including vision: the Arduino Portenta H7 on an STM32H747 with cores at 480 and 240 MHz (Arduino Portenta H7).
Settled, open, contested

Settled: RISC-V cores now sit in widely used parts beside Arm. The ESP32-C6 and ESP32-C5 are RISC-V (ESP32-C6, ESP32-C5) and the RP2350 lets the user choose Arm or RISC-V (RP2350). Open: long-term availability. None of the maker pages opened here states a production commitment, so a community cannot plan a ten-year stock from them. Open: reuse of boards at end of life. The world generated 62 million tonnes of e-waste in 2022, and 22.3 per cent was documented as collected and recycled (The Global E-waste Monitor 2024). No open source was found that measures how many microcontroller boards are reflashed and reused. Contested: ready boards or bare chips. Ready boards are certified, documented and quick. Bare chips on the community's own board are smaller and cheaper per unit and need radio and layout skill. Most groups start on boards.

The four stages

Resources at each stage

2 Design

Size and choose

3 Build

Build or obtain

4 Deploy

Install, run and measure

What changes between 30 adults and 300 people

At 30 adults, one or two families cover everything: one Wi-Fi part and one low-power radio part, bought as ready boards. At 300 people, the design group fixes a short list of supported families, keeps spare boards and datasheets in stock, and reuses one firmware base across products.

Reference designs

  • Reference design

    ESP32-C6 Series Datasheet, version 1.6

    The maker's datasheet for the ESP32-C6. It gives a recommended ambient range of -40 to 105 degrees Celsius for every variant, peak Wi-Fi transmit currents of 252 to 354 mA at 3.3 V, and states a deep-sleep consumption of 7 microamps and 1 microamp with the chip powered off.

    External resource. Not made or verified by Public ProtocolMaturity: EstablishedSafety S0CommercialListed 16 November 2026

Parts list

Every resource that supports this element. Those marked External carry the label “External resource. Not made or verified by Public Protocol”.

ResourceTypeOriginMaturitySafetyLicence, as stated at its source
Arduino DocumentationGuideExternalEstablishedS0Not stated on the page opened
Arduino Nicla Sense METoolExternalEstablishedS0Not stated on the page opened
Arduino Portenta H7ToolExternalEstablishedS0Not stated on the page opened
EmbassyLibraryExternalWorkingS0Apache License 2.0 or MIT, at the user's option
The Embedded Rust BookGuideExternalEstablishedS0Prose CC-BY-SA v4.0; code samples MIT and Apache 2.0
ESP-IDFToolExternalEstablishedS0Apache-2.0
ESP32-C5ToolExternalWorkingS0All rights reserved (page copyright notice)
ESP32-C6 Series Datasheet, version 1.6Reference designExternalEstablishedS0Not stated on the page opened
ESP32-C6ToolExternalEstablishedS0All rights reserved (page copyright notice)
The Global E-waste Monitor 2024PaperExternalEstablishedS0Not stated on the page opened
MicroPythonToolExternalEstablishedS0MIT license
nRF54L15ToolExternalWorkingS0Not stated on the page opened
nRF9151ToolExternalWorkingS0Not stated on the page opened
PlatformIOToolExternalEstablishedS0Open source, permissive; licence not named on the page opened
Raspberry Pi microcontroller silicon documentationGuideExternalEstablishedS0Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA)
RP2350ToolExternalWorkingS0Not stated on the page opened
Zephyr ProjectToolExternalEstablishedS0Apache 2.0

Depends on, and completes

Depends on 10.1, 10.4.

It is one of 11 elements that complete Electronics and circuit design.

The standing questions

Who keeps the short list. Who holds the stock of spare boards. Who decides when a family is dropped.

Environments

Environment profiles for these settings: Hot deserts; Extreme heat; Arctic, subarctic and permafrost, including sea ice; Extreme cold; Small islands and coasts; Mountains and high altitude; River deltas and flood plains; Remote and off-grid sites; Tropical rainforest and humid tropics; Temperate and boreal forests; High humidity. All environments

Safety

State and evidence

Drafted

An editor has written the element's text from the resources listed under it, citing them. It is checked when it is reviewed.

Evidence from a real place or system is recorded here, with what did not work. What the states mean

History