Public Protocol
Platform

Element 10.8

Enclosures and harsh-environment hardening

Sheet
10.8
Chapter
10 Electronics and circuit design
State
Drafted
Release
16 November 2026
Editor
Contributed by Praecise as open research
Reviewers
To be named at review
Safety
S1, as the chapter
Licence
CC BY-SA 4.0
Resources
8

The element

Requirement

A device placed outdoors or in a harsh room has a stated ingress protection rating, components rated for the temperatures it will meet, and, where moisture or condensation is expected, a qualified protective coating.

How to tell
Options
Settled, open, contested

Settled: the IP code is defined by one international standard (IEC 60529:1989+AMD1:1999+AMD2:2013 Degrees of protection provided by enclosures (IP Code)) and coating qualification by IPC-CC-830C (IPC-CC-830C: Qualification and Performance of Electrical Insulating Compound for Printed Wiring Assemblies). Open: IEC 60529 and IPC-CC-830C are sold, so a small group often works from secondary summaries; the IEC webstore lists IEC 60529 at CHF 515 for one user (IEC 60529:1989+AMD1:1999+AMD2:2013 Degrees of protection provided by enclosures (IP Code)). Open: no open source was found on salt mist, condensation inside sealed boxes, or ultraviolet ageing of enclosures for small devices. Contested: coat or seal. Coating protects the board itself and makes rework harder. A well-sealed box keeps the board repairable and can trap condensation. No source opened here settles which suits which site.

The four stages

Resources at each stage

What changes between 30 adults and 300 people

At 30 adults, bought rated enclosures and parts with a wide temperature range are enough. At 300 people, a standard enclosure and gland set for all outdoor devices, a coating station with fume extraction, and a log of failures by site to learn from.

Reference designs

  • Reference design

    ESP32-C6 Series Datasheet, version 1.6

    The maker's datasheet for the ESP32-C6. It gives a recommended ambient range of -40 to 105 degrees Celsius for every variant, peak Wi-Fi transmit currents of 252 to 354 mA at 3.3 V, and states a deep-sleep consumption of 7 microamps and 1 microamp with the chip powered off.

    External resource. Not made or verified by Public ProtocolMaturity: EstablishedSafety S0CommercialListed 16 November 2026

Parts list

Every resource that supports this element. Those marked External carry the label “External resource. Not made or verified by Public Protocol”.

ResourceTypeOriginMaturitySafetyLicence, as stated at its source
Arduino Nicla Sense METoolExternalEstablishedS0Not stated on the page opened
ESP32-C6 Series Datasheet, version 1.6Reference designExternalEstablishedS0Not stated on the page opened
Chemical safety data sheetsGuideExternalEstablishedS1Not stated on the page opened
IEC 60529:1989+AMD1:1999+AMD2:2013 Degrees of protection provided by enclosures (IP Code)StandardExternalEstablishedS2Not stated on the page opened
IP code (Wikipedia)GuideExternalNot assessedS0Creative Commons Attribution-ShareAlike 4.0
IPC-CC-830C: Qualification and Performance of Electrical Insulating Compound for Printed Wiring AssembliesStandardExternalEstablishedS1Sold; table of contents free; copyright IPC
nRF54L15ToolExternalWorkingS0Not stated on the page opened
nRF9151ToolExternalWorkingS0Not stated on the page opened

Depends on, and completes

Depends on 10.3, 10.5.

It is one of 11 elements that complete Electronics and circuit design.

The standing questions

Who tests locally made enclosures. Who pays for the standards. Who decides that a site is too harsh for a device.

Safety

State and evidence

Drafted

An editor has written the element's text from the resources listed under it, citing them. It is checked when it is reviewed.

Evidence from a real place or system is recorded here, with what did not work. What the states mean

History