Element 11.8
Choosing materials for parts and machines
- Sheet
- 11.8
- Chapter
- 11 Materials and supply
- State
- Drafted
- Release
- 16 November 2026
- Editor
- Contributed by Praecise as open research
- Reviewers
- To be named at review
- Safety
- S2, as the chapter
- Licence
- CC BY-SA 4.0
- Resources
- 9
The element
- Requirement
Each part's material is chosen by a stated method from its function, the loads and conditions it meets, what it must not do, and what is locally available or recoverable, and the material's key properties are known from a cited source or a test.
- How to tell
- For each load-bearing part there is a short record: the function, the constraints, the objective (lightest, cheapest, lowest carbon) and the material chosen, with its data source. An open course on materials selection teaches selection by the Ashby method under multiple constraints and multiple objectives (Materials Selection and Design (NPTEL)).
- Property values come from a named source, or from a test with the method and uncertainty recorded (JCGM publications: Guide to the expression of uncertainty in measurement (GUM) and International Vocabulary of Metrology (VIM)).
- Where local or recovered material is used, it has been tested, because its properties are not those of a catalogue grade.
- Options
- Ashby-style selection: state the part's function, constraints and objectives and choose against them. The NPTEL course covers the Ashby method, multiple constraints and objectives, and shape factors (Materials Selection and Design (NPTEL)). The textbook the method comes from is commercial; the platform holds no openly licensed copy.
- Property data: openly reachable sources are few. The Materials Project holds computed properties of crystalline materials, not engineering design values (Materials Project). For building materials, embodied carbon (ICE Database (Inventory of Carbon and Energy)) and life-cycle data (ÖKOBAUDAT). MatWeb, a large engineering property site, could not be opened in this research and its terms are not read.
- Local and bio-based materials: recipes for materials from natural sources (Materiom); compressed stabilised earth, with strength classes and limits (Compressed Stabilised Earth Block).
- Recovered plastics: sorted by type before reuse (Precious Plastic).
- Simple testing: an open conversion of a tensile machine to an Arduino and a 24-bit load cell amplifier performs tensile, compression and cyclic tests (Universal testing machine in OSH and OSS (MECAMAT)). Testing rigs store energy and can fail violently; guard them.
- Settled, open, contested
Settled: the structured method of selection is standard engineering teaching (Materials Selection and Design (NPTEL)). Open: there is no openly licensed, comprehensive database of engineering design properties among the sources opened; this is the main gap. Contested: recovered material in load-bearing parts. It saves cost and waste; its properties vary batch to batch. Test each batch, or keep it to parts whose failure harms no one.
The four stages
- Learn: Materials Selection and Design (NPTEL).
- Design: write function, constraints and objectives; choose against them; record the source of each value.
- Build: test local or recovered stock on a rig such as Universal testing machine in OSH and OSS (MECAMAT), reporting uncertainty to JCGM publications: Guide to the expression of uncertainty in measurement (GUM) and International Vocabulary of Metrology (VIM).
- Deploy: keep a materials register with test results beside the design files.
Resources at each stage
1 Learn
Understand
- Compressed Stabilised Earth Block Guide, S3
- JCGM publications: Guide to the expression of uncertainty in measurement (GUM) and International Vocabulary of Metrology (VIM) Standard, S0
- Materials Project Dataset, S0
- Materiom Dataset, S1
- Materials Selection and Design (NPTEL) Course, S0
- Precious Plastic Reference design, S2
2 Design
Size and choose
- Compressed Stabilised Earth Block Guide, S3
- JCGM publications: Guide to the expression of uncertainty in measurement (GUM) and International Vocabulary of Metrology (VIM) Standard, S0
- ICE Database (Inventory of Carbon and Energy) Dataset, S0
- Materiom Dataset, S1
- Materials Selection and Design (NPTEL) Course, S0
- ÖKOBAUDAT Dataset, S0
3 Build
Build or obtain
- Compressed Stabilised Earth Block Guide, S3
- Universal testing machine in OSH and OSS (MECAMAT) Case study, S2
- Precious Plastic Reference design, S2
What changes between 30 adults and 300 people
At 30 adults, choose from a short list of materials the group knows and can buy, and buy rated parts for anything that carries people. At 300 people a test rig and a person to run it make it practical to use local and recovered materials in more parts.
Reference designs
-
Reference design
Machines and methods for recycling plastic at small scale. Its site states 1,100 workspaces in 56 countries in 2024.
External resource. Not made or verified by Public ProtocolMaturity: ReplicatedSafety S2Listed 16 November 2026
Parts list
Every resource that supports this element. Those marked External carry the label “External resource. Not made or verified by Public Protocol”.
| Resource | Type | Origin | Maturity | Safety | Licence, as stated at its source |
|---|---|---|---|---|---|
| Compressed Stabilised Earth Block | Guide | External | Established | S3 | Humanity as a whole, No rights reserved |
| JCGM publications: Guide to the expression of uncertainty in measurement (GUM) and International Vocabulary of Metrology (VIM) | Standard | External | Established | S0 | Copyright BIPM, all rights reserved (page footer); no open licence stated |
| ICE Database (Inventory of Carbon and Energy) | Dataset | External | Established | S0 | Educational use only; must not be used for commercial applications |
| Materials Project | Dataset | External | Established | S0 | Not stated on the page opened |
| Materiom | Dataset | External | Not assessed | S1 | Not stated on the page opened |
| Universal testing machine in OSH and OSS (MECAMAT) | Case study | External | Prototype | S2 | Not stated on the page opened |
| Materials Selection and Design (NPTEL) | Course | External | Established | S0 | Not stated on the page opened |
| ÖKOBAUDAT | Dataset | External | Established | S0 | Publicly available at no charge; licence terms in its data policy, not on the page opened |
| Precious Plastic | Reference design | External | Replicated | S2 | "Creative Commons Attribution", as its site states |
Depends on, and completes
It is one of 19 elements that complete Materials and supply.
The standing questions
Who pays for testing. Who decides that a local material is good enough. Who keeps the register.
Environments
no source found on material choice for salt exposure among the sources opened.
no source found.
no source found.
no source found.
no source found.
no source found.
no source found for machine parts. For earth blocks, the limits of the material are set out in (Compressed Stabilised Earth Block); read them before building with earth where floods occur.
Other harsh settings
no source found.
Safety level S2. A wrong material can let a part fail under load.
Environment profiles for these settings: Small islands and coasts; Arctic, subarctic and permafrost, including sea ice; Extreme cold; Hot deserts; Extreme heat; Tropical rainforest and humid tropics; High humidity; Temperate and boreal forests; Mountains and high altitude; River deltas and flood plains. All environments
Safety
State and evidence
Drafted
An editor has written the element's text from the resources listed under it, citing them. It is checked when it is reviewed.
Evidence from a real place or system is recorded here, with what did not work. What the states mean
History
- Drafted in the release of 16 November 2026.