Element 11.9
Battery and solar cell materials
- Sheet
- 11.9
- Chapter
- 11 Materials and supply
- State
- Drafted
- Release
- 16 November 2026
- Editor
- Contributed by Praecise as open research
- Reviewers
- To be named at review
- Safety
- S2, as the chapter
- Licence
- CC BY-SA 4.0
- Resources
- 9
The element
- Requirement
The community knows what its batteries and solar modules are made of, which chemistries are in use, in trial or still in the laboratory, and chooses what it buys on that basis. It does not build or open battery cells itself.
- How to tell
- Every battery and module in use is recorded by chemistry or cell type, maker and certification. The energy passes cover storage and generation systems and their standards.
- New chemistries are read by stage. Sodium-ion for stationary storage was presented by a maker in April 2026 at about 160 Wh/kg and more than 15,000 cycles, with commercial deployment expected within 2026; these are the maker's figures (A closer look at CATL's new sodium-ion battery (ESS News, 20 April 2026)).
- Solid-state electrolytes are recognised as research: halide electrolytes reached 1.7 mS/cm at room temperature in 2018, and environmental stability and interfaces remain open challenges (Halide solid-state electrolytes for all-solid-state batteries: structural design, synthesis, environmental stability, interface optimization and challenges).
- Perovskite claims are checked for outdoor evidence. Mini-modules monitored outdoors in Cyprus kept at best 78% of initial efficiency after one year, and the source states that current perovskite modules keep such efficiency only for weeks to months (EnergyVille/imec and partners show outdoor stability of highly anticipated perovskite solar modules).
- Batteries bought can be removed and replaced (Regulation (EU) 2023/1542 on batteries and waste batteries).
- Options
- Lithium-ion, the established chemistry; prices fell from USD 1,400 per kWh in 2010 to under USD 140 in 2023, according to the IEA (Batteries and Secure Energy Transitions).
- Sodium-ion for stationary storage: maker-stated operation from -40 to 70 degrees C (A closer look at CATL's new sodium-ion battery (ESS News, 20 April 2026)). Early commercial.
- Second-life electric vehicle batteries: retain roughly 70 to 80% of capacity but are less reliable than new cells (Challenges and Opportunities for Second-life Batteries: A Review of Key Technologies and Economy).
- Perovskite-on-silicon tandem modules: first commercial shipment announced in September 2024 (20% more powerful tandem solar panels enter commercial use for the first time in the US); a laboratory tandem cell certified at 34.85% in 2025 (34.85%! LONGi Breaks World Record for Crystalline Silicon-Perovskite Tandem Solar Cell Efficiency Again). Laboratory records are on the research chart (Best Research-Cell Efficiency Chart).
- Crystalline silicon modules, the established choice; see the energy passes.
- Settled, open, contested
Settled: lithium-ion is the established chemistry and its price has fallen steeply (Batteries and Secure Energy Transitions). Open: the field life of perovskite modules (EnergyVille/imec and partners show outdoor stability of highly anticipated perovskite solar modules); the stability of solid electrolytes (Halide solid-state electrolytes for all-solid-state batteries: structural design, synthesis, environmental stability, interface optimization and challenges); degradation models for second-life batteries do not yet exist (Challenges and Opportunities for Second-life Batteries: A Review of Key Technologies and Economy). Contested: when to move to a new chemistry. Sodium-ion is promoted for cold tolerance and abundant materials on maker figures (A closer look at CATL's new sodium-ion battery (ESS News, 20 April 2026)); independent field records are not yet in the library.
The four stages
- Learn: how cell chemistries compare (Batteries and Secure Energy Transitions, Halide solid-state electrolytes for all-solid-state batteries: structural design, synthesis, environmental stability, interface optimization and challenges); what the efficiency chart shows (Best Research-Cell Efficiency Chart).
- Design: choose by stage and certification; plan for removal and recycling (Regulation (EU) 2023/1542 on batteries and waste batteries).
- Build: buy certified products; install to the standards named in the energy passes (A closer look at CATL's new sodium-ion battery (ESS News, 20 April 2026)).
- Deploy: record performance; follow outdoor trials of new modules (EnergyVille/imec and partners show outdoor stability of highly anticipated perovskite solar modules, Challenges and Opportunities for Second-life Batteries: A Review of Key Technologies and Economy).
Resources at each stage
1 Learn
Understand
- A closer look at CATL's new sodium-ion battery (ESS News, 20 April 2026) Case study, S3
- Batteries and Secure Energy Transitions Paper, S0
- EnergyVille/imec and partners show outdoor stability of highly anticipated perovskite solar modules Case study, S0
- 34.85%! LONGi Breaks World Record for Crystalline Silicon-Perovskite Tandem Solar Cell Efficiency Again Case study, S0
- Best Research-Cell Efficiency Chart Dataset, S0
- 20% more powerful tandem solar panels enter commercial use for the first time in the US Case study, S0
- Challenges and Opportunities for Second-life Batteries: A Review of Key Technologies and Economy Paper, S3
- Halide solid-state electrolytes for all-solid-state batteries: structural design, synthesis, environmental stability, interface optimization and challenges Paper, S0
2 Design
Size and choose
4 Deploy
Install, run and measure
What changes between 30 adults and 300 people
At 30 adults, a single storage system is bought as a certified product, and new chemistries are followed rather than adopted. At 300 people, a settlement may join a supplier's field trial of a new chemistry or module type under a written agreement, with monitoring and a fallback.
Reference designs
Open for contributions Designs with drawings, specifications and a bill of materials. Add to it
Parts list
Every resource that supports this element. Those marked External carry the label “External resource. Not made or verified by Public Protocol”.
| Resource | Type | Origin | Maturity | Safety | Licence, as stated at its source |
|---|---|---|---|---|---|
| A closer look at CATL's new sodium-ion battery (ESS News, 20 April 2026) | Case study | External | Prototype | S3 | This content is protected by copyright and may not be reused |
| Regulation (EU) 2023/1542 on batteries and waste batteries | Standard | External | Established | S2 | Not stated on the page opened |
| Batteries and Secure Energy Transitions | Paper | External | Established | S0 | CC BY 4.0 |
| EnergyVille/imec and partners show outdoor stability of highly anticipated perovskite solar modules | Case study | External | Prototype | S0 | Not stated on the page opened |
| 34.85%! LONGi Breaks World Record for Crystalline Silicon-Perovskite Tandem Solar Cell Efficiency Again | Case study | External | Prototype | S0 | Not stated on the page opened |
| Best Research-Cell Efficiency Chart | Dataset | External | Established | S0 | The plot is not copyrighted and may be used in presentations and publications, with a notation that states: "This plot is courtesy of the National Laboratory of the Rockies, Golden, CO." |
| 20% more powerful tandem solar panels enter commercial use for the first time in the US | Case study | External | Not assessed | S0 | Not stated on the page opened |
| Challenges and Opportunities for Second-life Batteries: A Review of Key Technologies and Economy | Paper | External | Not assessed | S3 | arXiv.org perpetual, non-exclusive license 1.0 |
| Halide solid-state electrolytes for all-solid-state batteries: structural design, synthesis, environmental stability, interface optimization and challenges | Paper | External | Prototype | S0 | CC BY-NC 3.0 |
Depends on, and completes
It is one of 19 elements that complete Materials and supply.
The standing questions
Who carries the risk of a new chemistry. Who handles failed and spent cells. Who decides between cheaper now and longer-lived later.
Environments
no source found.
maker-stated sodium-ion operation down to -40 degrees C (A closer look at CATL's new sodium-ion battery (ESS News, 20 April 2026)).
maker-stated sodium-ion operation up to 70 degrees C (A closer look at CATL's new sodium-ion battery (ESS News, 20 April 2026)); perovskite trials are planned at arid sites (EnergyVille/imec and partners show outdoor stability of highly anticipated perovskite solar modules).
no source found.
no source found.
no source found.
no source found.
Other harsh settings
perovskite trials are planned at rainy and moderate sites as well (EnergyVille/imec and partners show outdoor stability of highly anticipated perovskite solar modules).
Environment profiles for these settings: Small islands and coasts; Arctic, subarctic and permafrost, including sea ice; Extreme cold; Hot deserts; Extreme heat; Tropical rainforest and humid tropics; High humidity; Temperate and boreal forests; Mountains and high altitude; River deltas and flood plains. All environments
Safety
State and evidence
Drafted
An editor has written the element's text from the resources listed under it, citing them. It is checked when it is reviewed.
Evidence from a real place or system is recorded here, with what did not work. What the states mean
History
- Drafted in the release of 16 November 2026.